Endless Endless System Inch Up Kit Chibi 6 Front 500/500C EEZ5X500C
Auction ends | 2 days |
Bids | no |
Current price | ¥335,700 $2,359 |
Start price | ¥335,700 $2,359 |
Buy-now | ¥335,700 $2,359 |
Consumption tax | 10% not included |
Seller | syarakuin +14520 |
Condition | New |
Start time | 2024-05-01T09:35:16+09:00 |
End time | 2024-05-08T09:35:16+09:00 |
Auto-prolongation | Turned off |
Lot number | 1109539422 |
Seller position | Saitama |
# Product number | EEZ5X500C |
■ Maker | Endless/Endless |
Product name | System inch up kit |
■ F / R | front |
■ Automobile manufacturer | FIAT/Fiat |
■ Model | 500/500C |
Model | |
■ Model Remarks | |
■ Genuine rotor size (outer diameter x thickness) | Φ257 × 22 |
■ Brake caliper item | Chibi 6 |
■ Caliper weight | 2510g |
■ Caliper dimensions | D135-141mm x H73.2mm x W266mm |
■ Caliper body color | Blue alumite |
■ Rotor (outer diameter x thickness) | 294x24 |
■ Rotor Piece type | 2PCS |
■ Pad type | RCP066 |
■ Kit content | ・ Caliper body (standard color is blue alumite) ・ Dedicated caliper brake pad (selected system) ・ Installation bracket ・ Large diameter brake rotor ・ Brake line for calipers |
■ About brake pads | Please select the brake pad from SSM Plus / New Type R / MX72 / MX72 Plus, and specify in the remarks column when ordering. |
■ Product Description | * 6pot caliper of compact design Compact 6 -pot caliper. Known as "Chibi 6". The caliper size supports the genuine wheels of sports cars from 16 inches, and of course, it also supports inched rotors.. The body is made of lightweight and high -rigidity, and not only has excellent durability and heat resistance, but also improves braking control.. It is a caliper that you can easily get a clicked pedal touch, the reliable braking of the multi -piston caliper.. |
Notes | * Rotor column 1PCS is genuine shape 1 -piece type, 2PCS is 2 -piece type, 3PCS is rear 3 -piece type. (Floating is treated as bespoke) * Comes with a size -up rotor. The attached brake rotor is a carvings slit type. * If you want to know the pattern information, please check the manufacturer's official website. |
■ Precautions when ordering a caliper kit | ◆ ENDLESS Caliper kit Please be sure to check the compatibility of the wheel before purchasing. For genuine wheels and wheels of some manufacturers, please use the "Pattern" on the compatible table of the official website of Endless. (Matching between the genuine wheel and the brake caliper made by Endless will be difficult to install, except for a small part. ) ◆ When installing ENDLESS caliper kits, the back plate processing of the rotor (cutting, bending, etc.) is required (excluding some models).. Please note. ◆ Aluminum processing is susceptible to continuous high -temperature conditions due to circuit driving, etc., and may be faded or peeled off.. For those who want to control fading and coloring as much as possible, racing alumite (caliper body) or toflam coat (bell housing only) is recommended. Also, please note that there are some different colors due to color unevenness and lots. In addition, it is not possible to apply an alumite processing again when overhaul, etc. ◆ ENDLESS Forged calipers are made of materials with high silicone content to enhance rigidity. For this reason, some color unevenness may come out due to the characteristics of alumite. In the case of the front and rear set, the color may differ before and after. Please note. ◆ The Racingmono series has a non -colored carbide aluminum processing (coloring is not possible due to the characteristics of the material used). ◆ The brake pad attached to the caliper kit can be selected. The brake pads that can be selected for each caliper are different. For more information, please see the ENDLESS official website "Caliper Kit Dedicated Repair Brake Pad List". ◆ The rotor attached to the caliper kit will be a "carving slit" specification, except for some caliper kits. * "Racingmono series" is an e -slit specification. * "CMC kit" is a drilled specification. Cannot be changed to e -slit. * "Rover mini exclusive" is an e -slit for 12inch only, and 4 pot for 10inch is drilled type. ◆ For the brake fruude used for the endless forged caliper, select the DOT4 standard or higher. ◆ Please note that the 2 -piece rotor (aluminum bell housing part) attached to the edless forged caliper and kit cannot be reprocessed in aluminum. |
Delivery time | We will contact you after the delivery date is confirmed for the product -made product. If you are in a hurry, please check the inventory in advance. |
■ When ordering Notes | * This item cannot be used for cash on delivery. If you order by cash on delivery, we will check with the customer and request a change to another payment method or cancel the order. |
Time | User | Price |
No bids | ||