Description of item |
|
It is an necessary and sufficient type that can be recommended for beginners to professionals when tuning such as carburetors and 4 trottles. There are various things such as meter type and drum type, but this type uses the negative pressure of the engine to raise and lower the resin sensor of only 0.06 g of the resin sensor, so it does not use engine stalls, so it is a simple mechanism, so long -term use, it is used for a long time. Poor operation does not occur even after leaving it alone. ■How to useIf you hit the cabburer sponge surface (back side of the product photo), a red resin sensor in the transparent and narrow sleeve will emerge, so the carburetor idol stop so that the height will be the same in each cylinder. It is OK if you adjust the screw etc.. ■Characteristic・ Measurable in a gap of only 40mm
・ Compatible with the caliber of a funnel from φ37 to φ74mm
・ High sensitivity in a wide range of measurements from idling to fully open
・ Because the load on the engine is almost zero, it becomes unstable or stalled. ・ Sensitivity adjustment can be done easily with one touch. ・ The meter sleeve is movable, so it supports cabs at all angles such as side and downraft.
・ Because it is a simple mechanism, it is used for a long time, and poor operation does not occur even after leaving it alone.
・ With Japanese manual
I am particularly happy that it can be used in a gap of 40mm, so it can be used not only for cars but also on motorcycles, so it is recommended because it has good sensitivity.. The engine that takes the same tuning is the most comfortable !! |
|
Shipment details |
|
■Please think about the risk that the shipping method, which has been stated (not liked the responsibility), and think carefully and think carefully.These are sometimes occur for about 5 days to arrive, misdemand, theft, accident or arrival for post-posting cheap shipping methods. · Form / non-standard size mail, no tracking number, and we can not respond to it even if you inquire after shipping contact. (I can not answer)
· SAL Small packet, click post, letter pack can be grasped in the tracking number, but it is not possible to respond other than "the tracking number is not reflected". If there is an accident, if an accident occurs, please ask the post office tracking survey from the customer side. Tracking the post office from our company is for a long time, and it is necessary to share a fee 500 yen. A compensation for Sagawa Express, Yu Pack, such as Sagawa Express, Sagawa Express, and Shipping is selected, but please acknowledge any problems. ■Outside of fixed forms (not responsible for liability)510 yen
■Letter pack plus (no compensation for corruption)520 yen
■Sagawa Express (except for remote island)690 yen Honshu, Shikoku, Kyushu
1230 yen Hokkaido
2180 yen Okinawa
■Yu-Pack730 yen Osaka
1340 yen Hokkaido
1000 yen Aomori, Iwate, Akita, Yamagata, Miyagi, Fukushima
880 yen Ibaraki, Tochigi, Gunma, Saitama, Chiba, Tokyo, Kanagawa, Yamanashi
880 yen Niigata, Nagano
770 yen Toyama, Ishikawa, Fukui
770 yen Shizuoka, Aichi, Gifu, Mie
770 yen Shiga, Kyoto, Hyogo, Nara, Wakayama
770 yen Tottori, Okayama, Shimane, Hiroshima, Yamaguchi
770 yen Kagawa, Tokushima, Ehime, Kochi
880 yen Fukuoka, Saga, Oita, Kumamoto, Nagasaki, Miyazaki, Kagoshima
1340 yen Okinawa |
|
Notes |
|
· The total price is possible, including shipping shipping and shipping costs. (Only the same ID successful bid product, some not bundled products, and 7 days after the control period)
· Please refrain from the character of the product basically. · Please refrain from bidding if you are concerned about exterior and detailed things in imported goods. · If you are asking for a dense contact or service, please refrain from bidding. · Questions after a successful bid, confirmation, change, bundled request may receive time (days). · After payment is confirmed, it is an average of 5 business days shipping. (When Saturday, Sunday is off, it is dispatched within 7 days)
· We can not cope with the inquiry of shipping date after a successful bid. · Contact here is basically only in the shipping contact according to Yahoo Encrual. · Please refrain from direct handout. · Issue of receipt is available. (You may download and print on the customer side)
· If you want to get caught in spam mail filters, please contact us on the bulletin board if you do not contact us even after the latest shipping date. ■Notation based on Specified Commercial Transactions LawName: West Engineering
Location: 2-49-1 Otake, Yao City, Osaka Prefecture
Manager in charge: Akira Miyashita
Business hours: 09: 00-18: 00
Closed: twice a month, 4th, weekdays (irregular) holidays
Phone: 072-968-7196 (Please refrain from responding by phone because you are busy)
Email: info@west- Engine.com (Please feel free to contact us) |
|
This item's guide is "■@Immediate Sale 5.60 ■It was created with. |
|