Snowboard Tuneup 1 [Side 88 base 1 °/Repair included]
| Auction ends | 5 days |
| Bids | no |
| Current price | ¥6,500 $46 |
| Start price | ¥6,500 $46 |
| Buy-now | ¥6,500 $46 |
| Consumption tax | 0% included |
| Seller | ftjp37 +491 |
| Quantity | 9 |
| Condition | New |
| Start time | 2024-04-17T10:04:17+09:00 |
| End time | 2024-04-24T10:04:17+09:00 |
| Auto-prolongation | Turned off |
| Lot number | 276213512 |
| Seller position | Kyoto |
● Is the snowboard condition perfect? With the tune -up of our studio, the snowboard will be restored to the freshly grated state. Slipping is not slippery, edges do not eliminate, edges get stuck
Specialized engineers will carefully repair and tune up such symptoms. The finish applies hot wax. Slip changes. Please try the tune -up of our studio once. ■ Flow from reception to deliveryRound -trip shipping ¥ 2,700 (Hokkaido, to remote islands ¥ 3,700)
【please】Please use the enclosed "Seino Transportation Payment slip" and send it out. We will also attach a phone number for pickup requests. * Depending on the region, the time zone may be limited to picking up in rare cases.After the snowboard arrives in our shop, we will return it to the customer in about 7 business days. (In the off -season, it may take about 10 business days)■ Snowboard tune [Standard/Side 88/Base 1 Course]1Check the snowboard before tune -up
| ● Mainly check the following status in advance of the chenup. [Check part of the run surface] The difference between the edge and the gliding surface, unevenness. The state of oxidation and keba standing surface. Sliding surface scratches, damage to Egure. [Edge check part] Damage such as edge rust, wear, chips, etc |
 |
● Polish evenly from the nose of the run surface to the tail, and remove the damaged old run surface. Old surface It is an image of slicing thinly. The thickness of the slice is adjusted according to the damage of the sole and base edge. Dent The convex sole first approaches the flat in this process (excluding intentional concave convex). This Remove relatively shallow scratches and line scratches in the process. An important process that requires skilled. |
|---|
 |
● It is a polishing process of the side of the edge. Remove rust, remove the edge scratches and chicken, and make the edge rounded by wearing. I will rebuild. Rusted edges are okay. Regain the original shine."Standard/Side 88 Base 1 Course" is finished to It is an edge angle that supports the no -board snow hold firmly and gives priority to "slashing and carving". |
|---|
 |
● Images that have been repaired with the dedicated repair machine "Extrar". "Sole repair" is supported for deep and deep scratches. Use the same [P-TEX "as the run surface for the repair material. that Is dissolved in the high temperature of around 250 ° C and welded in the sole. Excellent repair materials that penetrate WAX to the repaired part using. |
|---|
| ● Next stage of coarse shaving. We will repeat flat polishing including the repaired part. Remove the cherries generated by coarse and bring the run surface closer to flat. |
| ● Glossy sanding that improves gliding performance and rotation, our original micro polishing. Sanding belt with a very fine metal abrasive grain! Polish the running surface at low speed. The keba is completely removed, and a very smooth and smooth run surface with glossy. Excellent for both carving and slides Demonstrate the gliding performance. |
 |
● "Standard course" is finished to 1 ° base. This angle is firmly ho if you set up a snowboard. It is such a sharp edge angle that makes it easy to slide and spin if you ask the board and squeeze the board.. |
|---|
| ● We carefully remove the burrs remaining in the edge and adjust the edge sharp. Our shop does not use buffs, and performs this process by hand by hand. This makes it possible to adjust the accurate and uniform edge from the nose to the tail. Edge rust prevention agent is performed at this time. |
◇ After the snowboard arrives at our shop, we will return it to the customer in about 7 business days. (In the off -season, it may take about 10 business days)
◇ As a tune -up professional, we promise accurate and polite tune -up cultivated in 34 years of skills. ◇ Please send it as it is (even if it is not peeled) even if the old wax remains. After scraping in our workshop, we will construct a tune -up. ◆ Be sure to remove the snowboarding binding and send it. ◆ Please note that delivery to ski accommodation in the snowfall season may be delayed. In addition, the arrival date of the tune -up cannot be specified. ◆ There are plates that can not be tuned up for some reason, such as very thin running surface. In that case, we will return the product with the price. ◆ Please contact us when you ask technical questions. Tune -up serviceman will answer directly.■ If you place an order collectively, the shipping fee is advantageous ■
Even if you order multiple units, the shipping fee will be only one car (2,700 yen). ☆ In the case of multiple orders, please enter the desired quantity in the successful bid quantity. * If the remaining number of tune -up service products you are looking at is below the desired quantity, please make a successful bid for other tune -up service products. Many product pages are available. After confirming the payment, we will ship the packing case immediately. * Shipping to Hokkaido and remote islands is 3,700 yen.■ No packing case required, you can send it even by the original payment ■
If you wish to pay, please contact us in the transaction navigation that you want to pay. Please use your hand skiing, snowboard case, etc. The shipping fee will be discounted to 1,500 yen. (2,500 yen for Hokkaido and remote islands)
We look forward to your request. Store manager Kanno
■ Waves and Snow Works ■
Operating company: Jones Interseport Co., Ltd.
Location: 33-2 Nishikujo Takahatacho, Minami-ku, Kyoto 601-8446
TEL: 075-672-6662
Manager: Princess
Official web page:https://johns-internships.com/
| Time | User | Price |
| No bids | ||
