☆ JK Yacht Car W 2CK A1 Horn Mau Spiece Super Popular Model number A1 Initial Model Kok with rich sound beautiful uppercase typeface Free shipping! ☆
| Auction ends | 1 hour |
| Bids | no |
| Current price | ¥8,800 $62 |
| Start price | ¥8,800 $62 |
| Consumption tax | 0% included |
| Seller | jreubke +1111 |
| Condition | Used |
| Start time | 2024-05-02T02:30:54+09:00 |
| End time | 2024-05-05T23:30:42+09:00 |
| Auto-prolongation | Turned on |
| Lot number | c1117275093 |
| Seller position | Yamaguchi Prefecture |
The whole shape is a beautiful delicate design
JK (JAK, German reading yacht car) French horn mouthpiece "W 2CK A1", silver plate (silver plating finish)..
The engraving of a quaint typeface called "JK EXCLUSIVE W 2CK A1" is going around the body..
JK's horn mouthpiece has been significantly increased since November 2023 and is currently sold at a fixed price of 15,400 yen..
JK has built a tradition as a mousepiece, since Josef Klier was founded at De Spec, Bavarian, Germany..
With its elaborate construction, it is a very popular manufacturer in Europe, the United States, and Japan in addition to Germany..
Especially in recent years, in addition to the Berlin Philharmonicist Stephan Doll, it has gained overwhelming support from all over the world..
"W 2CK A1" is one of the most popular model numbers in the JK lineup, and it seems that even if it arrives at a music store, it often sold out immediately.. It is a model number with many loyal users for domestic and overseas professional players..
The specifications of the manufacturer announcement
Rim inner diameter 17.5mm
Bore (Throat) 4.4mm
Cup depth standard ~ Somewhat deeper
Cup shape V cup (JK's unique V -cup shape)
Has become.
The U -cup "W 2cm" and "W 2DM" are also popular, but the "W 2CK", which has a darker, deep traditional central European tone, is rich in the forest. The sound is wonderful.
The first letter "W" in the model number means a mouthpiece for Waldhorn (French horn), and is an acronym for distinguishing from the mouthpiece for Winna Horns produced.. The mouthpiece for Winnaborn is the first word "WH".
The "2" part of the model number represents the inner diameter size of the rim.
In JK, the rim size is in order from the larger one
01 (18.5mm), 1 (18.0mm), 12 (17.75mm), 2 (17.5mm), 23 (17.25mm), 3 (17.0mm), 4 (16.5mm)
There are 7 types of rim size..
The "2" rim is the most standard size, and it will be a rim size that will make many people feel good..
The "C" part of the model number represents the depth of the cup, and in the JK, there are 6 steps of A to F in the order of deep → shallow..
The C cup is the third from the deeper, and the fourth from the shallow.. It will be a cup that is standard or slightly deeper.
"K" is the shape of the cup and indicates a V cup..
Instead of a simple V -cup, JK has a very carefully examined design, such as resistance and pitch at the brass band, and is very highly evaluated in the mainstream horn mouthpiece. It's a cup design.
It features a traditional horn, a European, slightly dark tone..
JK's mouthpiece also features a U -cup "M" cup specification, which features a slightly brighter tone..
It is said that U -cup mouthpieces are relatively easier to play than V -cups, but this mouthpiece is an exquisite balance between cups and V -cup shape that is not too deep. It seems that the ease of putting out the high range is well balanced..
In the cup, we dare to leave the lathe processing marks in a hairline shape, and we hear that the breath and sounds of the breath and the sound are subtly complicated to create a good tone..
The "A1" part is a model number on the new model, including the change in the back bore..
The jk horn mouthpiece has changed the specifications that can be said to be a minor change around 2010, and the thickness of the rim has been changed depending on the shape and model number of the back bore..
Since then, the stamp of "A1" has been added to the end of the model number has become a standard model..
It seems that the model of the specifications before the "A1" is attached can still be made custom -made..
I think this "W 2CK A1" is a wonderful rim that is not as thick as the later W 2CK A1, and is both hard to control the lips..
In addition, it seems that the back bore has been changed to a slightly wider design in A1, and the tone seems to be even richer..
It is compatible with a slightly deeper cup of "C" and a 4.4mm bore (throat), combining the richness of the tone, the ease of blowing in a wide range of ranges, and the exquisite resistance when breathing. I think.
JK's mouthpiece is especially in the rim and shank, and the shape may vary slightly depending on the time of production or the craftsman who produced it..
It can be said that it is an individual difference in a good sense by handmade, so for those who are already using "W 2CK" or "W 2CK-A1", it is a subtle difference in tone and brass band, and rims and shank. You can also enjoy subtle differences.
There seems to be no accurate announcement from the manufacturer about the shank, but it seems to be an intermediate shank between European shank and American shank, and it can actually be attached to either shank instrument.. Apart from this, a shank specification called "AS" tailored to Alexander's instrument only has also been released..
Alexander, Paxman, Yamaha, Hanshoyer, Corn, Holton, Ventzel Minele, and other horns from most manufacturers are one of the popular reasons..
When you blow it, the reaction is very good, and you can get a rich and deep attractive sound in all sounds..
I think that it is suitable for both the so -called upper blowing who plays a lot of high range, and those who play a lot of mid -low and low -pounds..
Good tone, ease of blowing from low range to high range, control, volume, long -time performance, durability in long phrases, intonation (pitch). I think it's a piece.
It is a mouthpiece worth trying even for those who have a thin tone or are not confident in the long -term performance..
I think it's an excellent mouthpiece with a wide range of, from solos and ensembles to large orchestra and brass band..
Keeps a good condition overall. There are small scratches on the outer periphery of the rim, but there is no hindrance to the performance.. The whole silver plating condition is very good and it shines beautifully..
It is very carefully produced and very elaborate, from rims, cups to throat, backbore, and shank finishing..
From the surface of the mouthpiece to the back bore and the tip of the shank, it is cleaned and polished moderately, so it is cleaned without worrying about dirt..
The recently manufactured JK mouthpiece seems to be a bit cheaper because the engraving has been changed to the one with the alphabet lowercase.. The engraving of the uppercase that goes around the body of this mouthpiece looks beautiful, including the font..
We will send you for free shipping nationwide with Otaga Delivery Cat Pos.
Catopos is anonymous delivery by Yamato Transport, and the delivery status can be tracked.
Basically, it seems to be posted on the post, but if you do not enter the post, it will be handed by the delivery staff, so it is safe..
Since the cushioning material is used well, you can send it without worrying about packing within 3cm thick..
We will send it strictly after packing.
| Time | User | Price |
| No bids | ||
