Zemaitis ZMF2023BD METAL FRONT BASS OVERDRIVE PEDAL over drive base effector
Appeared in the bass handmade overdrive "ZMF2023BD" with the goldening design of the Zemighty Metal Front!
The base hand overdrive "ZMF2023BD" has appeared from Zemightis.. The ZMF2023BD is a compact effector that decorates the top of the metal front -based image that represents Zemighty and decorates the plate of aluminum alloy with luxurious carving that makes use of curves.. Mat, Black Color cases, are a robust aluminum alloy housing, and uses a hamonds that are used by many famous effectors.. The control knob is designed to be an effector and imagine a metal front base while adopting a metal hat knob used in Zemightis.. The ZMF2023BD is a wide and easy -to -use base overdrive that combines a natural rock, a large tube amplifier of the 1970s, which is familiar with traditional rock, and connects from natural distortion to contemporary intense distortion sounds. Aimed for. No matter how distorted, the bass is not lost and it realizes a bold tone.. In addition, it has been developed with the cooperation of the designer of the Handmade Effector brand, which was highly evaluated in the 1990s. The tone control uses Sw-Tonesystem (switch tone system), and can bypass the tone by squeezing the control.. By bypassing the tone, it becomes an edge sound, and can be used as a slap sound or as a modern and radical base drive.. It features a surprisingly thick and good sound in any usage.. In addition, we are manufacturing in Japan, such as mounting, wiring, and case processing by carefully manual work.. In order to make a product that combines durability so that you can use it for many years, it is designed so that it has less sound quality deterioration and fully demonstrates the effect effect.. [What is SW-TONESYSTEM?]
The general tone circuit has the problem that even if the control position is full, the signal to the variable resistor for the tone cannot be completely cut off, and the mask is slightly applied to the high range.. It is a system that completely cuts the signal to the variable resistor for the tone using a switch and fully disconnects to ensure clear sound quality.. [Main features of ZMF2023BD]
● Aluminum, die -cast body: Hammond's aluminum material case, which has a long track record as many effectors around the world, achieves high electrical conductivity and has excellent sound quality.. In addition to the highness of the aluminum itself, by adopting a die -cast body (integrated structure), the damage to the substrate, which is the heart of the effect, is minimized for impacts such as falling. Can be suppressed to. In addition, minimizing the lid and external protrusions dedicated to battery replacement prevents careless damage, and the body achieves even more strength.. ● Broadcast: To prevent noise and so -called sound thinning, the circuit design from input to output is rationalized as much as possible and manufactures with hand wiring.. The complex circuit and unnecessary baht are abolished, and the circuit design that is extremely ragged to the limit has improved sound quality, but also reduces the failure caused by the complex circuit design.. We provide pure sounds with less noise, with less noise deterioration and loss of circuit.. In addition, the electrolytic capacitors used for this unit are all high -quality electrolytic capacitors for audio.. Furthermore, it is designed to use a metal film resistor for resistance, and all of them are highly accurate (± 1 %), so that the sound quality is unlikely to occur.. ● Metal plate: The top aluminum alloy carving plate, which greatly characterizes the appearance of ZMF2023BD, is an icon that inherits the tradition of the Zemighty Guitar, and has a different sense of luxury and presence than just printing and paint. Direct. ● Control Knob: We do not use plastic that is easy to change over time and are easily damaged, and adopts a luxurious heavy duty metal.. Since it is a compact effector that has many opportunities to use at the feet, the probability of damage has been greatly reduced compared to a plastic knob when accidentally stepped on the control knob.. Metal knobs also play the role of ground.. ● Switch/LED/Jack: Zemighty ZMF2023BD uses a mechanical switch that emphasizes sound quality without using an electronic switch.. You can feel the click sensation that is not in the electronic switch from the soles. We adopt a good blue LED with good visibility even in dark places. Input and output jacks are made of highly reliable switchcraft. ● Battery space: Opening the back cover that is staying with a 4 -point screw on the back of the body has a battery space, and it is a place to connect to the battery snap and store the battery.. By not providing a battery -dedicated lid, the damage is minimized.. [Specifications]
■ Power: 006P (9V) Battery/AC adapter
■ Control Knob: Level, Tone, Drive (3 pots)
■ Switch: Effect ON/OFF, mechanical foot switch × 1
■ Input / output terminal: IN, OUT, DC input terminal (DC9V)
■ Input impedance: about 1mΩ
■ Recommended output load: 10kΩ or more
■ Current current consumption: Approximately 20mA
■ External dimensions: 94 (W) x 34 (H) x 119.5 (d) mm * Not included. ■ Maximum external dimensions: 100 (W) x 49.2 (H) x 121.2 (d) mm * Not included leg rubber. ■ Weight: Approximately 300g * Battery does not include. * DC in adaptation plug size: Inner diameter 2.1mm / outer diameter 5.5mm
* Be sure to use the center or minus for the polarity of separately sold power supply.. * Recommended power supply will be Music Works DC0913B. * Leg rubber attached
* Dry batteries are not included.

---

We keep stock products in the Kanto warehouse in addition to the headquarters warehouse (Kitakyushu, Fukuoka). Even if the dispatcher is in Fukuoka Prefecture, depending on the ordered item, if it will be shipped from the Kanto warehouse or order a multiple items, it will be shipped from multiple warehouses and delivered in multiple mouths. There may be. Please note.

---

Time	User	Price
No bids