AIBO [alternative parts for ERS-110/111] Mimi (black) ★ Shape function emphasis/glossy surface unevenness/soft material TPU |
|
The left and right set, the fine finish is not performed, the same TPU material as some smartphone cases. |
(Black is the exhibition. Other colors are used for the explanatory image) |
|
The prototype is connected with rubber material, but this substitute has a thick connection part and shakes like the prototype. |
|
The surface unevenness is rough, and the mounting pipe part is fitted and weakly adhesive (using adhesive for water -based woodwork). |
|
See the attached instructions (A4 print) for the mounting method. |
|
* In the successful bid at the prompt decision price, the left and right SET of white (white) will be attached for dyeing and painting, |
The mounting pipe part is not glued because white hinders dyeing. |
|
Regarding "TPU dyeing", information on the use of clothing and fiber dyes "DYLON Multi" is on the Internet. |
|
We are testing for painting, but before treatment such as degreasing, file hanging, putty coating, etc |
It is mainly provided with materials to avoid problems due to differences in viewpoints. |
|
Since the main part is thin, it is deformed with the solvent contained in the coating agent, so if it is dried as it is, the shape will remain |
Water -based paint is recommended to fix it with double -sided adhesive tape to a flat board. |
|
Avoid heating and drying, as it is also a factor in deformation. |
|
When peeling off or repainting, in acetone (instant adhesive peeling liquid, removal liquid) or lacquer thinner |
The TPU material is not easily dissolved, but if it is soaked for a long time, it will deform (bend / laminate separation), |
Process should be performed quickly, and it is recommended to use water -based paint and water -based (woodwork) bonds. |