The name of CTEK, born in Sweden, Sweden, is synonymous with high -performance and high -performance battery charger. Our shop is a CTEK USA authentication agency. We will deliver this latest battery charger from the United States at a local price. This product is the latest model that appeared as a successor to the MUS3300, and is a new generation battery charger with charging characteristics specialized in motorcycles and power sports cars.. This product has thoroughly enhanced the overworked battery, which repeats the full operation and charging of the battery every day.. This charger is most suitable for the following vehicles. It can be widely used for daily charging, such as full operation during the day, charging at night, and maintaining and maintaining vehicles that you do not usually ride.. - bike
-Power Sports Vehicle * ATV, Sports Buggy, Jet Ski, Snow Mobile, etc.
-Golf cart
-Argrading tools
-Meiri vehicle
-Bill cleaning equipment * Sweepers, scrivers, etc.
-Meifact vehicles / industrial vehicles
-Electric wheelchair / silver car■ Evolution point
Charging mode is significantly powered up to 2.3A! * Motorcycle charging mode MAX0.8A in the conventional model
Temperature sensor mounted temperature sensor constantly monitors the internal temperature of the main body and maintains an efficient charging state. Compared to the conventional model without a temperature sensor, we have achieved an increase in charging efficiency of 10%or more.. In addition to 12V lead battery, a charging mode for 12V lithium -ion battery!
8 step charging is finally implemented! Dramatically evolution from 4 steps so far to the same 8 steps as the upper model!
Adopt the latest algorithm peculiar to this product according to the overworked battery!■ □ ■ Battery charge in 8 steps ■ □ ■Step 1 DesalismSulfation (lead sulfate) detection / removal mode. We send current and voltage, and remove lead sulfate from the lead plate, promoting the recovery of the original battery capacity.Step 2 Soft StartWe will test whether battery charging can be accepted and prevent damage to damaged batteries..Step 3 Bulk chargingCharge with maximum current to about 80%capacity so that the battery does not load..Step 4 AbsapitionCharge the current to the maximum capacity and proceed with the charging carefully..Step 5 analysisTest whether the battery can hold charging.Step 6 Ricondition (ReconD)This process is added only if you select a recontration mode in the mode selection.. Raise the voltage to 15.8V and intentionally generate gas inside the battery.. As a result, the battery solution is crushed and stirred to restore the charging ability.Step 7 FloatThe battery voltage is held at the maximum level. Perform a supplementary electricity with the minimum current as necessary to maintain the voltage.Step 8 pulseWe monitor battery discharge and recharge while promoting activation with strength and weak current so that the battery voltage can maintain 95-100%.. ■ □ ■ CTEK Battery Charger Features ■ □ ■ ■
Many car manufacturers are genuine designated as a global standard battery charging and maintenance tool
There is no effect on car computers and sensors that can be charged while connecting the battery to the car
Charging OK that always keeps connected by overcharging function
■ About outlet plug ■
This product has a wide range of outlet plugs per US specification.. Usually, the outlet hole in the ordinary household is wider on the left side, so if you can match it.
You can insert it without any problem. However, rare outlet holes may not be inserted depending on the design clock or manufacturer. In such a case
Purchase table taps and extension codes with a wide hole at a 100 yen shop..
Our shop does not exhibit all CTEK products. If you are looking for other CTEK products, please send your request directly by e -mail.