12V T10 LED 4 consecutive BlueA total of 11 pieces of bid 1 (one of which is a preliminary warranty such as damage, etc. during transportation)..Since 4 SMD type 3528LED is implemented, it is ideal for meter spheres that shine at a wide angle.. The lighting is confirmed before the packing, but the cat pos will be packed in a cushion envelope.. There is a risk of damage during transportation, so we add one as a pre -security.. If you are using Takkyubin, you can pack cardboard even with small items.. * LED has polarity. If it does not light up, please insert it on the opposite. In addition, the type of socket and usage status (if it is wider than the socket used for checking the lighting here), it may not come into contact well.. Please adjust the pin of the product and adjust it to contact the socket terminal.. Also, if it is gripped, lightly hold the terminal on the socket side with radio pliers and make it tight.. This will make almost no contact failure without adjusting the pin.. * Because it is a general -purpose product, it may be necessary to process or install depending on the model. Please check the size etc. carefully. Since the LED is sensitive to heat, it cannot be continuously lit in places where heat is kept, such as a small sealing space. Please note that some models with high voltage are not available. We are not responsible for any damage or damage of vehicles due to installation. * Please make sure that the mounting part is DC. Cannot be used in exchange. In particular, there are many models with exchanges around the lights for motorcycles. In that case, take the DC from the battery side etc.* 2 Additional sets may not be attached to the desired number depending on the stock status It will be shipped on the day by payment until 13:00.