2 sets of 2 sets of light emitting element 1 for infrared light electric sensor 1 and light receiving element 2
| Auction ends | 1 day |
| Bids | no |
| Current price | ¥600 $5 |
| Start price | ¥600 $5 |
| Buy-now | ¥900 $7 |
| Consumption tax | 0% included |
| Seller | so45wildcard +7615 |
| Condition | New |
| Start time | 2024-04-25T06:40:26+09:00 |
| End time | 2024-05-02T06:40:26+09:00 |
| Auto-prolongation | Turned off |
| Lot number | f244365910 |
| Seller position | Kanagawa Prefecture |
The left two are light emitting part, and the four right are the light receiving part..
0 Beam This is a set of light elements for infrared and transparent light electric sensor with a squeezed diameter.. Omron, SUNX and keyneens, etc. are expensive and seem to be difficult, but it seems to be difficult.
In fact, it is quite simple, and the basic elements are made up of the light emitting part and the receiving part.. With this basic element, various applications are possible because of the high degree of freedom.. For example, the existence, missing, passing, movement of things, etc. can be freely configured without knowing it.. By doing various experiments, you can see the essence and make it look interesting.. 1. Kit content (image 1)
(1) Infrared light emitting diode: Toshiba beam opening angle 8 degrees (image 2) 2
It has a dark color with a visible light cut, and the long one lead is anode ( + pole).. (2) Infrared photo transistor: Mitsumi beam opening angle 10 degrees (image 3) 4
This is also a dark color with a visible light cut, and the long one lead is the emitter.. 2. Explanation of how to make
(1) Light emission side: Approximately 5mW for 10 mA current, 60mW radiated output at 100mA current.. Considering safety, it is safe if you use it at about 20mA. (2) Introduction side: Transistors cannot be used to driven directly to drive the relay directly.
Please drive the relay etc. through. If you use parallel, you can improve sensitivity.. 3. others
(1) Data sheets, etc. can be supplied by PDF. (2) Easy advice is possible for each application. If you wish, multiple sets are also possible. Shipping will be performed by fixed form mail, etc., and after shipping, we will inform you of the shipping time and location..
In fact, it is quite simple, and the basic elements are made up of the light emitting part and the receiving part.. With this basic element, various applications are possible because of the high degree of freedom.. For example, the existence, missing, passing, movement of things, etc. can be freely configured without knowing it.. By doing various experiments, you can see the essence and make it look interesting.. 1. Kit content (image 1)
(1) Infrared light emitting diode: Toshiba beam opening angle 8 degrees (image 2) 2
It has a dark color with a visible light cut, and the long one lead is anode ( + pole).. (2) Infrared photo transistor: Mitsumi beam opening angle 10 degrees (image 3) 4
This is also a dark color with a visible light cut, and the long one lead is the emitter.. 2. Explanation of how to make
(1) Light emission side: Approximately 5mW for 10 mA current, 60mW radiated output at 100mA current.. Considering safety, it is safe if you use it at about 20mA. (2) Introduction side: Transistors cannot be used to driven directly to drive the relay directly.
Please drive the relay etc. through. If you use parallel, you can improve sensitivity.. 3. others
(1) Data sheets, etc. can be supplied by PDF. (2) Easy advice is possible for each application. If you wish, multiple sets are also possible. Shipping will be performed by fixed form mail, etc., and after shipping, we will inform you of the shipping time and location..
| Time | User | Price |
| No bids | ||
