■ Prompt decision free shipping ■ Harley Davidson/Rear Carrier & saddle Support Bullet Guard 2012XL1200 Sports Star/Quick Release/Detacchable
Auction ends | 2 days |
Bids | no |
Current price | ¥20,000 $138 |
Start price | ¥20,000 $138 |
Buy-now | ¥20,000 $138 |
Consumption tax | 0% included |
Seller | goro0911 +3488 |
Condition | Used |
Start time | 2024-04-27T18:15:05+09:00 |
End time | 2024-04-30T18:15:05+09:00 |
Auto-prolongation | Turned on |
Lot number | g1129474514 |
Seller position | Nara Prefecture |
There are some scratches associated with use and cloudy, but I think it is beautiful overall.. I can't find any ugly scratches in the image. Cloudy, please clean with Picar, etc.. I think it will be shiny. As a trial, I polished a little and it became quite beautiful. Except for the connection, there seems to be no plating peeling or rust,
The latch movement is also good. Please refer to the last image for the attached mounting bolt.. I don't know if I have everything because I didn't remove it myself.. However, the main parts seem to be available, so if there is a shortage, please purchase it at a home improvement store.. According to the Internet, it can be used for XL1200 and 883 of 2004-2021.. Please refer to the following size. Mounting pitch 195mm
Measure the center from the side mounting hole center
Inside width of the mounting part
Front 266mm
Rear 277mm
259mm inside the latch
If the error is about 5-10mm, I think it can be adjusted with washer.. Please forgive some errors about the above measurement size.. In order to save shipping fee, the loading board mounting stay will be disassembled and shipped.. 20240321-01Y0325
0316d
The latch movement is also good. Please refer to the last image for the attached mounting bolt.. I don't know if I have everything because I didn't remove it myself.. However, the main parts seem to be available, so if there is a shortage, please purchase it at a home improvement store.. According to the Internet, it can be used for XL1200 and 883 of 2004-2021.. Please refer to the following size. Mounting pitch 195mm
Measure the center from the side mounting hole center
Inside width of the mounting part
Front 266mm
Rear 277mm
259mm inside the latch
If the error is about 5-10mm, I think it can be adjusted with washer.. Please forgive some errors about the above measurement size.. In order to save shipping fee, the loading board mounting stay will be disassembled and shipped.. 20240321-01Y0325
0316d
Time | User | Price |
No bids | ||