High -pressure washing machine Stainless steel nozzle tip 1593 Icuuchi Ililc M Ikeu 1/8 screws
| Auction ends | over |
| Bids | 1 |
| Current price | ¥1,800 $13 |
| Start price | ¥1,800 $13 |
| Buy-now | ¥1,800 $13 |
| Consumption tax | 0% included |
| Seller | tootoo3322 +5207 |
| Quantity | 5 |
| Condition | New |
| Start time | 2023-05-31T20:27:40+09:00 |
| End time | 2023-06-02T20:27:40+09:00 |
| Auto-prolongation | Turned off |
| Lot number | h299448687 |
| Seller position | Tokyo |
High voltage is a hole sizeimportant
Nozzle chip 1/8 screws 1593
Injection angle (fan type) --- 15 degrees (standard is 15 degrees) The work efficiency and finish change depending on the injection angle
Pole size number --- 93
Manufacturer --- Ikeuchi made
Material --- Stainless steel
Mounting screw size --- Male 1/8 (about 9mm)
Caution Relationship between holes and pressure※ The size of the hole of the high -pressure washing machine is important・ (If the hole is too large --- pressure decreases due to insufficient water, detergency is reduced)
・ (If the hole is too small --- mechanical performance pressure is issued, the amount of water is reduced because the amount of water does not appear.)
・ (If the hole is too small --- mechanical performance pressure is issued, the amount of water is reduced because the amount of water does not appear.)
Caution When the cleaning machine is watered, the power is applied, and the actual amount of water is reduced by more than 10 %, so be sure to choose a 1-2 size hole.
There is no mistake if you accumulate the amount of water from the nozzle you actually use in the bucket.
Please refer to the frame belowThere
|
Click the hole size ↓
The injection angle is 15 degrees to 65
|
Water pressure used
|
||||||
|
5MPA
50k
|
6.5MPA
65k
|
8MPA
80k
|
10MPa
100k
|
15MPa
150k
|
20MPa
200k
|
||
|
Hole size
|
|||||||
Red is hole size·Blue numberIs the amount of water (little) that comes out at the time of the surplus pressure (little)
Click the number to find the specified hole size
 |
■All of the one -touch coupler(1/4·3/8·1/2)
Furtech, Cincho, Seiwa, Wagner, Others
Karcher, electrical Makita, Zao Older, Other Electrical High Volunteers
Engine type Makita, Zao Sangyo, Honda, Super Industries, Others
| Time | User | Price |
| No bids | ||
No questions.
