ILSA Ilsa cast iron Gotoku / Espresso maker / Made in Italy / Kerosin Stove, Optimus Optimus No.111, 8R
| Auction ends | 6 hours |
| Bids | no |
| Current price | ¥1,820 $13 |
| Start price | ¥1,820 $13 |
| Buy-now | ¥1,820 $13 |
| Consumption tax | 0% included |
| Seller | ph_snow89 +1582 |
| Condition | New |
| Start time | 2024-04-24T20:30:44+09:00 |
| End time | 2024-04-27T20:30:34+09:00 |
| Auto-prolongation | Turned off |
| Lot number | j1113111614 |
| Seller position | Iwate Prefecture |
☆☆☆ If you can't even contact us as a minimum rule, don't make a successful bid. ☆☆☆◎ ILSA Ilsa Burner Plate, Gotoku Unused. ・ If you drop it on a hard ground made of cast iron, it may be broken at worst, so be careful when handling it.. ・ Made in Italy
・ Outer diameter ≒ 120.78mm
・ Inner diameter (between nails, nails, protrusions and protrusions) ≒ 22.85mm
・ There is a protrusion on the back side to prevent shift.. ・ Thickness ≒ 4.83 mm (without protrusions)
・ Because the inner diameter is small, it can also support Sierra Cup and direct -fire espresso maker.. ・ "Kerosin Stove" in the title,
There is no problem with the "0.5Pint" and "1Pint" stoves, but in the "1 & 3/4Pint" class, it is not very recommended because it feels like it is just barely.. ・ In the image is [Radius No.20] [Radius No.21] [Svea No.106] [Optimus No.111] [Optimus 8R].. (Neither stove is included in the exhibit)
・ Even in the "1 & 3/4Pint" stove, it depends on the length of the horizontal part of the attached pan support, so please judge the conformity from the above size.. ☆ Please choose either 250 yen outside the standard, letter pack light (370 yen)..☆ About bundle
・ There are things that can be bundled and some cannot. In addition, the shipping cost may change (= increase) when increasing the size and weight increasing by buying it. Other than that, there is no unknown fee, such as "bundled fees", "fees for shipping entrustments", or "additional fees specified by delivery time". ・ For those living in Chiba, Ibaraki, and Ishikawa
It seems that it may take days from non -standard -size shipping to arrival in Chiba, Ibaraki, and Ishikawa prefectures than in other prefectures. In fact, there have been about 3 cases that took up to 10 days so far. This is the internal circumstances of Japan Post, so we can't help it. If you are in a hurry, we recommend a letter pack. ☆ After the auction, only those who can strictly adhere to the completion of the payment procedure within the "24h" and the "48H" should bid. If no contact or payment procedure is performed after the above deadline, it will be treated as a "cancellation due to the highest bidder convenience". If you do so, you will get a "bad evaluation" at the same time, but there is nothing you can do here. Most of them are not, but some of them seem to be trying to prolong the transaction, so we will set a deadline. (If you have time to say something in the message, use that time to complete the deposit. )
I don't have any binding force. ・ There may be reasons and circumstances such as "busy work", but everyone has the same thing and the situation. Currently, the only payment method is "Easy Payment", so it should not be impossible. If you can't keep the deadline, please tell us in advance. There is no need to consider. However, don't forget that "within the range of common sense" and "within the payment deadline". ・ "We will not issue a receipt"
・ "After the auction is the end", please do not place an order about the delivery method. Perhaps it is probably a transfer company for Asia that comes to order, such as "with tracking numbers" and "delivery with a specific record", but if you have any special requests,
"Be sure to ask before the end". We will not respond to requests after the end. We do not respond to the request of "Please fill in the auction ID and product name in the margin.". Even if you write, you can not understand Japanese, or some people still place orders such as the above, but we will not respond to special orders and requests after the auction. ・ Another person, there is a person who stubbornly involves exchanges in the “message format”, but please stop this. Unless you have an additional option, it is not accumulated if you ask a message, from the click to be displayed by clicking (& method), account information, etc. This is not a face -to -face sales, but an online auction.
・ Outer diameter ≒ 120.78mm
・ Inner diameter (between nails, nails, protrusions and protrusions) ≒ 22.85mm
・ There is a protrusion on the back side to prevent shift.. ・ Thickness ≒ 4.83 mm (without protrusions)
・ Because the inner diameter is small, it can also support Sierra Cup and direct -fire espresso maker.. ・ "Kerosin Stove" in the title,
There is no problem with the "0.5Pint" and "1Pint" stoves, but in the "1 & 3/4Pint" class, it is not very recommended because it feels like it is just barely.. ・ In the image is [Radius No.20] [Radius No.21] [Svea No.106] [Optimus No.111] [Optimus 8R].. (Neither stove is included in the exhibit)
・ Even in the "1 & 3/4Pint" stove, it depends on the length of the horizontal part of the attached pan support, so please judge the conformity from the above size.. ☆ Please choose either 250 yen outside the standard, letter pack light (370 yen)..☆ About bundle
・ There are things that can be bundled and some cannot. In addition, the shipping cost may change (= increase) when increasing the size and weight increasing by buying it. Other than that, there is no unknown fee, such as "bundled fees", "fees for shipping entrustments", or "additional fees specified by delivery time". ・ For those living in Chiba, Ibaraki, and Ishikawa
It seems that it may take days from non -standard -size shipping to arrival in Chiba, Ibaraki, and Ishikawa prefectures than in other prefectures. In fact, there have been about 3 cases that took up to 10 days so far. This is the internal circumstances of Japan Post, so we can't help it. If you are in a hurry, we recommend a letter pack. ☆ After the auction, only those who can strictly adhere to the completion of the payment procedure within the "24h" and the "48H" should bid. If no contact or payment procedure is performed after the above deadline, it will be treated as a "cancellation due to the highest bidder convenience". If you do so, you will get a "bad evaluation" at the same time, but there is nothing you can do here. Most of them are not, but some of them seem to be trying to prolong the transaction, so we will set a deadline. (If you have time to say something in the message, use that time to complete the deposit. )
I don't have any binding force. ・ There may be reasons and circumstances such as "busy work", but everyone has the same thing and the situation. Currently, the only payment method is "Easy Payment", so it should not be impossible. If you can't keep the deadline, please tell us in advance. There is no need to consider. However, don't forget that "within the range of common sense" and "within the payment deadline". ・ "We will not issue a receipt"
・ "After the auction is the end", please do not place an order about the delivery method. Perhaps it is probably a transfer company for Asia that comes to order, such as "with tracking numbers" and "delivery with a specific record", but if you have any special requests,
"Be sure to ask before the end". We will not respond to requests after the end. We do not respond to the request of "Please fill in the auction ID and product name in the margin.". Even if you write, you can not understand Japanese, or some people still place orders such as the above, but we will not respond to special orders and requests after the auction. ・ Another person, there is a person who stubbornly involves exchanges in the “message format”, but please stop this. Unless you have an additional option, it is not accumulated if you ask a message, from the click to be displayed by clicking (& method), account information, etc. This is not a face -to -face sales, but an online auction.
| Time | User | Price |
| No bids | ||
