About this product

• It is thought to be indispensable when used in an environment where there is no power (AC100V), such as a power outage, camp, or stay in a car.. Corrected mine can be replaced by automotive battery DC 12V DC power with more stable AC100V AC power to supply electric devices to electronic devices.. Rated output: 200W (AC+USB) input voltage: DC12V output voltage: AC100V.
• After energization, the battery voltage will be displayed on the display, so you will be able to tell you the condition of the battery properly.. And is it normal or unusual? You can see at a glance with two colors, green light and red of LED light.
• Overload protection/short circuit protection/over voltage protection/low voltage protection/abnormal temperature detection protection is attached, and power is automatically turned off.. It has a temperature control fan, and the exhaust heat also increases depending on the temperature.. Designed in compact & lightweight
• With 4 USB power supply and two AC100V power supply, smartphones and laptops (cannot support a certain type of laptop computer, for example, if the instantaneous power of the old version PC is too high, there is a possibility that it will not work with a protective function. there is. ), Video cameras, digital cameras, CD/DVD players, boomboxes, TV games, iPads, electric razors, etc. can be used..
• Normally, the reasons for unusable are as follows.. The key switch on the side does not turn on. In the case of over -voltage and low voltage, the red lamp will be lit and cannot be used.. This product is exclusively for DC12V negative areas cars. Not applied to 24V cars. If you use a device that exceeds 200W, do not insert it directly into the car socket inside the car.. Please use a connection clip for the car battery. Because it is equipped with a cooling fan, a small amount of sound is made when used.. There is no problem with using it, so please use it with confidence.. If you use it in the car for safety use, please be careful not to exceed 200W for overall power consumption of electrical products..
• If you use it for the first time, the voltage is unstable and it takes a little time to react, so wait 1 minute until the voltage is stable before use..