* Please be sure to use a life jacket for safety when using it. ★ AF277M Details / Specs
Navigation area: 3 nautical areas (about 5.4km)
Capacity (person) / loading weight (kg): 3/360
Size (cm): 277 in total length, 122 full width, tube diameter 33, deck length 210, ship inner width 58, aluminum sheet width 74
Weight (kg): Boat body 15.0㎏ roll up floor 5.0kg (5 sheets)
Number of air rooms: 2
Bottom format: Built -in roll -up floor
Maximum performance (HP): 2 S Shaft
* When using the outdoor unit, please purchase a dedicated motor mount separately.. Color: Medium Gray x Clear Black
Accessories: Two wide aluminum sheets, aluminum integrated all, high -pressure foot pump, repair kit, dedicated carryback
No preliminary inspection setting for 2 horsepower
List of genuine attractions ◆ M model for M model ◆
☆ A base that can be mounted on either front and rear is attached. * Motor mount sets optional blackwood products.
☆ Adopts a newly designed roll -up floor. It can be stored in about 50 % compared to air floor boats
☆ Boat fabric adopts extremely thick 0.8 mm in this class. Achieving significant durability and rigidity
☆ The new design square form secures the highest floor area of the same class and can be used spaciously with the wide aluminum sheet.
☆ The sideboard material is designed with a wide tutordrop type like a high -priced model. Strong protecting boats from waves and obstacles
☆ Equipped with four stabbie keel on the bottom of the hull. Realizes excellent wind -winding and straightening stability
☆ Equipped with 2 places with lots of lots of accessories that can handle various accessories
☆ Anchoral roller, anchor -based, and D -ring equipment are also used for hanging fishing and mooring
☆ Equipped with a dedicated rope and large ring on the front
☆ Realized the largest space efficiency of newly designed long floors and wide aluminum boards
☆ Changed the main body boat cloth from 5 layer coat to 9 layer coat
☆ Equipped with a wide -type aluminum sheet
☆ Adopts a special seat base that can be free and free.
☆ The plywood plywood is highly water -resistant, highly durable material changes, and a significant durability is improved by resin coating
☆ Equipped with an aluminum 2 -split oar. All locks are designed to be wrapped in rope
☆ Specially adopted the main body tube and the bottom fabric, 9 -layer coating processing, special processing color
☆ Made of lightweight and high -strength 1000 denier PVC
★ Comment
New AF277M. It is a design that can be mounted on either front and rear as a motor mount boat.. The size is a standard size of 277 cm, but it can be used very relaxedly with a square exclusive shape.. The width is a tight shape to increase the speed, but it is an exquisite balance that ensures sufficient buoyancy and does not fall too much, making it a strong boat that takes into account the wind, which is a weak point of inflatable.. Lightweight is also a major feature
Most of the boats of this size were made of 0.5 mm to 0.7 mm thick fabric, but the AF boat M series adopts a 0.8 mm thick fabric to achieve high durability and rigidity.
Storage and development time are greatly reduced. A roll -up floor that can be stored and stored on the main unit is used on the floor by splitting the black panel on the floor.. The deployment and storage time are about half of the airfore boat.. The stability unique to a flat boat has been kept as it is, but it has become particularly excellent.. Review the hull design from scratch, secure the highest level floor area on the long floor, and achieve the largest space efficiency with a wide aluminum board.
This boat material is not a general material, but a new PVC material developed with high strength, low contraction, high rigidity, lightweight, and the boat is ticking anyway, and the rigidity is overwhelming.. The main body tube and the bottom are newly adopted a newly adopted fabric with a newly adopted 9 -layer coat coating and a fabric that enhances the deterioration prevention function due to ultraviolet rays.. It is a high -strength design that is convinced by tonamers and hard users for harsh tasks and rentals. Because it is a model with four stabbie keel, the stability of driving and the characteristics that do not rotate without flowing in the wind promise dramatic performance. In addition, this keel protects the bottom of the boat to greatly improve durability. It will be sold with a new warranty. Since it is a dedicated design up to 2 horsepower, please use the engine and electricity up to 2 horsepower.. The AF boat was developed by a professional seabass guide ship captain, marine pro shop, and outdoor unit manufacturer. Limited products that cannot be obtained elsewhere and do not sell at mass retailers and other shops
◆ AF boat is a high rigidity model, so the setting of air pressure when using it is higher than the normal model.. Please note the following points.
F /M /MC series standard use pressure
Body 20.0-25.0kpa (200-250mm)
* The pressure will always fluctuate depending on the water temperature and temperature, so please consider it as a guide.. Please do not use it with the maximum pressure or higher. ● Assembly order of AF boat M series
① Attach the aluminum sheet
② The main body is finished in the order of the front and rear. |
|
Depending on the shipping size, additional shipping and relay fees are charged in Hokkaido, North Tohoku, Okinawa, and remote island areas. Please refer to the shipping table for details. We will add additional shipping costs when your order is confirmed and send by e -mail. If a relay fee is charged in the remote island area and the amount is added, we will present the additional amount to the customer in advance. The relay fee calculation will be shipped after receiving the consent, so please answer the contact. ● Delivery may change slightly due to traffic conditions, changes in transportation companies, and weather. Please consider the specified date and time as a rough guide. Please note that depending on the delivery area, the delivery may not be in time for the desired date and time. ★ Please note that business hours are AM10 to PM4, maintenance on Wednesdays, Saturdays, Sundays, summer vacation, GW, and year -end and New Year holidays.Notes★ All new boats and engines are included with a dealer sales certificate and comes with a manufacturer's warranty. ★ New engines purchased by us can be shipped nationwide and can repair maintenance after purchase. If you wish to respond to maintenance, be sure to leave the original box. We will reply to the destination after contacting us. (The maintenance factory specified by us does not accept outdoor units other than the original box)
