Gloves authentic type (If you wish to mold it on our glove, please make a successful bid here) [Part 19]
| Auction ends | 2 days |
| Bids | no |
| Current price | ¥3,000 $21 |
| Start price | ¥3,000 $21 |
| Buy-now | ¥3,000 $21 |
| Consumption tax | 0% included |
| Seller | jinnijiruba +20215 |
| Condition | New |
| Start time | 2024-05-04T16:34:21+09:00 |
| End time | 2024-05-11T16:34:21+09:00 |
| Auto-prolongation | Turned off |
| Lot number | k1107889684 |
| Seller position | Hiroshima |
● It will be an exhibition of "full -scale type attachment" to the grab that we received in our bid.. ● If you wish to mold the glove of our exhibition, please make a successful bid with the grab.. ● About molding. ● 1) Apply a dedicated oil (Mizunomagical fit) to the limited key points to minimize the damage to the leather, and apply a low temperature and short -term oil.. (Depending on the leather situation, other oils may be used together)
● Part 2 Use a dedicated molding machine (ton -ton machine) while warm after steaming oil, hits the key points and soften.. ● 3 After hitting with the machine, fine -tunes with "Hand fir" and "hit stick" on a special tap.. ● After the process of hitting the hitting, apply the oil for retention as a whole, apply the ball thinly, put the ball in the catching pocket, tie it with a strap and place it overnight.. ● Part 5 Repeat this series of processes many times until you are satisfied. ● The 6th finish is applied to the entire German oil (100 % natural materials with a blend of honey and jojoba oil) with an leather component, and the key points are finished with amani oil.. ● Grab's original form with the basic form that is originally held, but the catch ball is done without any problem.
Please blend into the grabs further according to the hands of those used after the product arrived.. ● If you simply make it softer to Gunyagunya, you can apply a large amount of "hot water" or a softening agent to the whole and steam it for a long time at a high temperature.
Dare to do "Yumomi" and do not use the minimum necessary oil and low temperature for short -term oil processing.. Just close to the relationship between the bone and the joints, the core is hard but closes.. It is rarely seen now because of the hassle, but I make pockets in a classic method tied with a strap.. If you tie it with a strap, you can input a three -dimensional force, so the advantage is that you can make a pocket that can be used to a chic that can not be obtained only by hitting it.. ● Delivery time, but it takes about 10 days.. ● Please note that there are oil stains and dirt associated with molding processing.. ● It will be an exhibition of "molding". The grab in the image is not a product. ● I'm sorry now, but it is not supported for left throw.
● Part 2 Use a dedicated molding machine (ton -ton machine) while warm after steaming oil, hits the key points and soften.. ● 3 After hitting with the machine, fine -tunes with "Hand fir" and "hit stick" on a special tap.. ● After the process of hitting the hitting, apply the oil for retention as a whole, apply the ball thinly, put the ball in the catching pocket, tie it with a strap and place it overnight.. ● Part 5 Repeat this series of processes many times until you are satisfied. ● The 6th finish is applied to the entire German oil (100 % natural materials with a blend of honey and jojoba oil) with an leather component, and the key points are finished with amani oil.. ● Grab's original form with the basic form that is originally held, but the catch ball is done without any problem.
Please blend into the grabs further according to the hands of those used after the product arrived.. ● If you simply make it softer to Gunyagunya, you can apply a large amount of "hot water" or a softening agent to the whole and steam it for a long time at a high temperature.
Dare to do "Yumomi" and do not use the minimum necessary oil and low temperature for short -term oil processing.. Just close to the relationship between the bone and the joints, the core is hard but closes.. It is rarely seen now because of the hassle, but I make pockets in a classic method tied with a strap.. If you tie it with a strap, you can input a three -dimensional force, so the advantage is that you can make a pocket that can be used to a chic that can not be obtained only by hitting it.. ● Delivery time, but it takes about 10 days.. ● Please note that there are oil stains and dirt associated with molding processing.. ● It will be an exhibition of "molding". The grab in the image is not a product. ● I'm sorry now, but it is not supported for left throw.
| Time | User | Price |
| No bids | ||
