Ski Tuneup 2 [Side 88 base 1 °/Repair included] With packing material
| Auction ends | 4 days |
| Bids | no |
| Current price | ¥6,500 $45 |
| Start price | ¥6,500 $45 |
| Buy-now | ¥6,500 $45 |
| Consumption tax | 0% included |
| Seller | ftjp37 +492 |
| Quantity | 9 |
| Condition | New |
| Start time | 2024-04-24T10:12:50+09:00 |
| End time | 2024-05-01T10:12:50+09:00 |
| Auto-prolongation | Turned off |
| Lot number | k355831738 |
| Seller position | Kyoto |
● Is the ski condition perfect? With the tune -up of our studio, the skiing will be restored to freshly grated state. Slipping is not slippery, edges do not eliminate, edges get stuck
Specialized engineers will carefully repair and tune up such symptoms. The finish applies hot wax. Slip changes. Please try the tune -up of our studio once. ■ Flow from reception to deliveryRound -trip shipping ¥ 2,700 (Hokkaido, to remote islands ¥ 3,700)
【please】Please use the enclosed "Seino Transportation Payment slip" and send it out. We will also attach a phone number for pickup requests. * Depending on the region, the time zone may be limited to picking up in rare cases.After skiing, we will return it to the customer in about 7 business days. (In the off -season, it may take about 10 business days)■ Ski tune -up [Standard/Side 88/Base 1 Course]1Check skiing before tune -up
| ● Mainly check the following status in advance of the chenup. [Check part of the run surface] The difference between the edge and the gliding surface, unevenness. The state of oxidation and keba standing surface. Sliding surface scratches, damage to Egure. [Edge check part] Damage such as edge rust, wear, chips, etc |
 |
● Polish evenly from the nose of the run surface to the tail, and remove the damaged old run surface. Old surface It is an image of slicing thinly. The thickness of the slice is adjusted according to the damage of the sole and base edge. Dent The convex sole first approaches the flat in this process. This Remove relatively shallow scratches and line scratches in the process. An important process that requires skilled. |
|---|
 |
● It is a polishing process of the side of the edge. Remove rust, remove the edge scratches and chicken, and make the edge rounded by wearing. I will rebuild. Rusted edges are okay. Regain the original shine."Standard/Side 88/Base 1 Course" is finished to Is an edge angle that supports the hard snow surface of the ski and gives priority to "slashing and carving". |
|---|
 |
● Images that have been repaired with the dedicated repair machine "Extrar". "Sole repair" is supported for deep and deep scratches. Use the same [P-TEX "as the run surface for the repair material. that Is dissolved in the high temperature of around 250 ° C and welded in the sole. Excellent repair materials that penetrate WAX to the repaired part using. |
|---|
| ● Next stage of coarse shaving. We will repeat flat polishing including the repaired part. Remove the cherries generated by coarse and bring the run surface closer to flat. |
 |
● The run surface will be completed after two steps of stone stones. [High -speed gliding] The grinding stone for polishing is gliding the run surface with high -speed rotation and processed into a higher accurate flat run surface. [Low -speed gliding] Polish the run surface on the mirror surface. It is the final finish of the run surface. Finish on the mirror surface and "Structure" (bay) Engrave the smark). It has played a role in eliminating resistance to snow crystals and moisture caused by the run surface and snow surface. However, it is an indispensable processing method for improving the run performance.. The standard course structure is "Universa Lacross ". Encourage a wide range of all -purpose structures that support a wide range of from wet snow to dried snow. ● Our shop uses a highly accurate "square pillar diamond dresser". Positive positive without unevenness and width You can engrave a certain structure. |
|---|
| ● "Standard course" is finished to 1 ° base. This angle will hold a skiing skiing firmly, hold the snow surface firmly, and ski it to make it easier to slide. It is such a sharp edge angle. |
| ● We carefully remove the burrs remaining in the edge and adjust the edge sharp. Our shop does not use buffs, and performs this process by hand by hand. This makes it possible to adjust the accurate and uniform edge from the nose to the tail. Edge rust prevention agent is performed at this time. |
◇ After skiing, we will return it to the customer in about 7 business days after arriving at our shop. (In the off -season, it may take about 10 business days)
◇ As a tune -up professional, we promise accurate and polite tune -up cultivated in 34 years of skills. ◇ Please send it as it is (even if it is not peeled) even if the old wax remains. After scraping in our workshop, we will construct a tune -up. ◆ The ski binding is fine. ◆ Please note that delivery to ski accommodation in the snowfall season may be delayed. In addition, the arrival date of the tune -up cannot be specified. ◆ There are plates that can not be tuned up for some reason, such as very thin running surface. In that case, we will return the product with the price. ◆ Please contact us when you ask technical questions. Tune -up serviceman will answer directly.■ If you place an order collectively, the shipping fee is advantageous ■
Even if you order multiple units, the shipping fee will be only one car (2,700 yen). ☆ In the case of multiple orders, please enter the desired quantity in the successful bid quantity. * If the remaining number of tune -up service products you are looking at is below the desired quantity, please make a successful bid for other tune -up service products. Many product pages are available. After confirming the payment, we will ship the packing case immediately. * Shipping to Hokkaido and remote islands is 3,700 yen.■ No packing case required, you can send it even by the original payment ■
If you wish to pay, please contact us in the transaction navigation that you want to pay. Please use your hand skiing, snowboard case, etc. The shipping fee will be discounted to 1,500 yen. (2,500 yen for Hokkaido and remote islands)
We look forward to your request. Store manager Kanno
■ Waves and Snow Works ■
Operating company: Jones Interseport Co., Ltd.
Location: 33-2 Nishikujo Takahatacho, Minami-ku, Kyoto 601-8446
TEL: 075-672-6662
Manager: Princess
Official web page:https://johns-internships.com/
| Time | User | Price |
| No bids | ||
