Thank you very much for seeing it. ■ Mustang / Mustang Control plate / Fire pattern type
One stainless steel is exhibited. (No.mfw-01 type: Fire Pattern / Flame type)
● Mustang/Mustang Control plate ------------------
(No.mfw-01 type: Fire Pattern / Flame type)
It will be the plate in the image. Image/design of fire pattern/flame on one side of the plate
It is an original product created. The protrusion of the flame design part is a round and smooth polishing process.. specification:
・ Stainless steel SUS304/2B, plate thickness: 2mm,
・ Body mounting screw hole: 4.2mm diameter x 3,
・ Jack mounting hole: 10mm diameter x 1,
・ Pot mounting hole: 10mm diameter x 2
・ Surface processing:
It is a mirror surface polishing process with fine hairline overall.. Fine polishing marks and fine pinholes of the material itself remain on the polishing surface.. ▲ Product description:
・ We will exhibit a plate that has been grinded and polished from one cut plate in your own.. Fender USA 1975 Musa Control Plate and Fender
I made it with reference to the size made of JAPAN. Open holes when compared to Fender Japan's control plates
The diameter and the pitch between each hole were the same (of course, it is attached to Japan).. The shape dimensions of the exterior were slightly made of Japan (about 0.8mm in large parts). Fender USA's 1970 and 1960s Mustang's body control
When comparing the three holes for attaching the plate, is it the effect of the maker -side jig?
It seems that the body side is about 0.2 to 0.4 mm on the body side.. I did not compare the Mustang of all ages, only by hand
It is a value that compares Mustang and parts. The exhibited product is a craft product that I created, not a commercial product.. ・ The material is stainless steel SUS304. Please use it by all means. ***************************For those who can understand, please bid with no claim no return. Please note that there may be times when contacting here may be delayed due to work.