Points to note (important)
◆ Because the product is an overseas product, there may be some dirt. In addition, the appearance may differ slightly depending on the manufacturing time. Please note that there is no problem in use. ◆ All successful bidder will be contacted by e -mail address of order form input by e -mail, so it is sorted to spam folder and deleted email folder in the case of the refusal settings and automatic filtering functions. In some cases, you may not receive an email from our shop.. Please check once just in case. If you still do not receive the email, please contact us from the contact bulletin board of the successful bid product. ◆ Depending on the characteristics of HID, the new valve may flicker immediately after lighting, but it is not a failure. It will be stable after about one day after use. ◆ Please do not touch the glass part of the valve by hand. There is a risk that the life will be shorter, and in the worst case, there is a risk that the valve will burst. ◆ Some models may cause lighting failure due to voltage instability. (Please purchase an optional power supply stability enhancement relay)
◆ If there is a phenomenon such as one side that does not light up or not lit, the polarity (+/-) supplied from the vehicle may be reversed. In that case, it is necessary to supply power supply that matches the power supply voltage and polarity direction required for the product. The product does not work with the wrong voltage or polarity. It lights up when the 12V input socket to the ballast is inserted 180 degrees.. Please be assured that it is not a bad product. ◆ Be sure to check the lighting check before installation and processing to confirm the initial failure. ◆ If it does not light up after installation, it may be possible to contact poorly, so please check if it is attached firmly. If it still does not light, replace the left and right and check the lighting. If the same valve does not turn on, please contact us by email. We will respond to the exchange. ◆ If you do not connect to the genuine connector and light up, connect it directly to the battery and check the lighting. (If it does not light up even when connected to the battery, it may be defective)
* Please check the battery with enough charging. ◆ If the headlight fuse flies immediately after lighting, replace it with a fuse about 5A because the current is insufficient.
◆ This item has a car inspection for vehicle inspection, but the judgment varies depending on the inspector, so we cannot be responsible for vehicle inspection etc. Please note. ◆ Regarding the installation, you will need specialized knowledge, so please ask a contractor / dealer.
* Profit / failure due to installation work by the customer is not eligible for warrantyPlease fully understand and make a successful bid. (We do not provide support or installation work in our shop. )
If a valve rupture or fire occurs in spite of the installation of a trader or dealer, it is taken.
You can make a mistake.● Factors of bulbal rupture: If the glass is touched directly by hand or touched with an oiled gloves
● Fire factors: If the wiring process is insufficient, if there is something that is easy to burn around the ballast
When the lock is not properly locked when installing the H4 valve, etc.
・ Many fire information due to installation mistakes has been reported to the Ministry of Land, Infrastructure, Transport and Tourism..
・ No matter what reasons, we cannot bear the wages for removing and detaching. Please understand.
We would like to make a successful bid for those who can agree to the above contents.
Before shipping, operation confirmation * Lighting test has been conducted+warranty+domestic direct delivery = safe! ! !
|