LARGUS Largs Camber Bolt Alfaromeo GTV 916C1 Front 2 sets
Auction ends | 5 days |
Bids | no |
Current price | ¥4,400 $31 |
Start price | ¥4,400 $31 |
Buy-now | ¥4,400 $31 |
Consumption tax | 10% not included |
Seller | largus4259_3 +4644 |
Condition | New |
Start time | 2024-04-26T07:35:19+09:00 |
End time | 2024-05-03T07:35:19+09:00 |
Auto-prolongation | Turned off |
Lot number | p1003641460 |
Seller position | Saitama |
Camber bolt is a biased bolt that allows you to adjust the camber angle by replacing it with the genuine bolt of the strat suspension knuckle. Usually, there is no camber angle adjustment function for genuine suspension, genuine shape suspension, and non -adjustable upper mount harmonic drive. In addition, some models will be negative camber with low down, and some models cannot be done on the positive side even if the upper mount is adjusted. In such a case, this camber bolt can be used only by bolt replacement or can assist in adjustment. Largus's camber bolt is overwhelmingly difficult and durable compared to bolts with a thinner structure due to the structure of the adjusted cam, Sim stopper, so it can be introduced with confidence. In the following cases, consider the introduction of Camber Bolt. [1] A genuine -shaped suspension that cannot be adjusted and low -down with a down suspension or down suspension, the camber angle is too high and tire uneven wear is intense. [2] I want to improve the cornering performance and steering feel by attaching the camber angle. [3] The tire and wheels have protruded from the fender, where the tread is wide, and it has become less than the security standard. [4] There is not enough camber angle by the adjustable adjustment width alone. It may be possible to solve it by attaching a camber bolt for the above case.( * Camber bolt is not installed only to prevent uneven wear and guarantee security standards. Be sure to adjust the alignment after adjusting the camber angle. ) |
If you attach the camber bolt and cam washer nails so that the claws of camber bolts and cam washer overlap, the amount of change is small, and if the nails are installed in the opposite direction, the camber angle can be changed to+-1.75 °.. Changes to positive camber or negative camber can be changed depending on whether the orientation of each nail is placed on the suspension side or on the knuckle side as shown in the figure. Also, after installing once, it is possible to easily adjust by simply turning the bolt. |
* When installing, mark with marking, etc. so that you can see the direction of the bolt claws.. |
Because the inside is an elliptical loose nut, it is not easily loosened after installation.* When you tighten the nut or more, you will not be able to tighten it by hand, but it is not a defective product. Please install using a tool. Notes・ After installation, it is strongly recommended to adjust the alignment. ・ Camber angles that can be adjusted using this product vary depending on the vehicle type and use, so we can not answer. ・ This product will be dedicated to strut -type suspension. Cannot be used in other shaped suspensions. ・ The product image will be a sample image. There may be differences in colors, etc. depending on the bolt size and production rod.. |
Bolt size: 12mm A: 14mm B: 9mm C: 12mm D: 64mm E: 15mm Bolt size: 14mm A: 15mm B: 11mm C: 14mm D: 70mm E: 18mm Bolt size: 15mm A: 15mm B: 12mm C: 15mm D: 70mm E: 18mm Bolt size: 17mm A: 18mm B: 14mm C: 17mm D: 81mm E: 21mm Each size: 2 sets |
Product | Camber bolt |
Car manufacturer | Alfaromeo |
Car model | GTV |
Model | 916C1 |
Model year | 1997.06-2001.08 |
Drive system | 2WD |
Mounting position | front |
Adjustment range | ± 1.75 ° |
quantity | 2 set |
Bolt size | 12 mm |
Remarks | - |
About delivery date | In principle, it will usually be shipped within the same day to 2 business days.* Since this product is also sold on other sites, it may be out of stock depending on the timing of ordering. * In the unlikely event that you are out of stock, we will contact you at the time of ordering at our shop. The deadline for delivery of missing items is 3-4 weeks. (It may vary depending on the product) |
About returned goods / cancellation | ・ We cannot accept returns, cancellations, and products by customer convenience. Please be sure to check the conformity in advance. ・ If you have any questions regarding the product or compatibility, please feel free to contact us. |
Time | User | Price |
No bids | ||