|
|
[Type 20T/CB] Toyota T Mark & TOYOTA logo mark refueling fuel cap cover [ABS resin/carbon style/glossy finish] Missed product/Braga [Type 20T/CB] Toyota T Mark & TOYOTA logo mark refueling fuel cap cover [ABS resin/carbon style/glossy finish] Missed product/Braga★ Free shipping Campaign is underway / Free shipping nationwide! Okinawa/remote islands are also OK!
Shipped by Japan Post [Click posts]! * I will throw it in the post / mailbox. * No cash on delivery (in the case of cash on delivery, shipping 580 yen and cash on delivery fee of 380 yen will be charged separately. )[Compatible vehicle type]
《Toyota Car》 General -purpose product* The shape may not be possible because the shape is different depending on the model, year, grade, etc. Be sure to check your genuine refueling cap before purchasing after checking the following compatible examples and compatible sizes before purchasing. * Gasoline vehicles [high -octane regular share] can also be installed on diesel vehicles [light oil]. * This product is only for genuine cap with a fall prevention code on the side. Therefore, it cannot be attached to the cap or cord with the fall prevention code on the upper surface.● Crown ● Majesta ● Mark X ● Camry
● Hiace ● Regius Ace ● Alphard ● Vellfire
● Estima ● Noah ● Voxy ● Esquire ● Harrier
● C-HR ● Land Cruiser ● Prado ● Hilux/Surf
● RAV4 ● Yaris/Cross ● Prius ● Prius α ● Prius PHV
● Corolla Cross ● Corolla Touring ● Rise ● Aqua ● Vitz
● Roumy ● Sienta ● Tank ● 86 ● Supra
● Other Toyota cars* If this product size and the compatible size of the genuine refueling port cap of the customer, it can be installed.. [Type 20T/CB] Toyota T Mark & TOYOTA logo mark refueling fuel cap cover [ABS resin/carbon style/glossy finish] Missed product/Braga■ The finest "carbon tone" water surface printing processing specification!
■ Outstanding glossy specification! Surface clear top coat finished!
■ This product is an external product made in Europe and the United States.. ■ Easy installation! Strong double -sided tape stop. ■ Compatible product Toyota T mark & TOYOTA with logo mark sticker ( * Customer -ordered/external goods)
■ The unique texture and color unique to carbon -like water surface printing are outstanding!
■ The refueling cap that is normally bare is shining at once and claims to be!
■ The impact when the refueling port is opened is enormous!※Note
・ The sticker will be set and shipped to this product as a customer injection after ordering. ・ The logo mark is pasted with a powerful glue, but it is a cutting sticker to the last, so it may be slightly peeled off depending on the aging and usage status. Please note. ・ Be careful not to apply gasoline, light oil, etc. on the sticker when refueling.. Also, be careful not to touch the sticker part as much as possible during refueling work. Especially when you touch it with your nails, it is easy to peel off.■ This product color /Carbon -like glossy finish [Carbon]
Carbon -toning surface printing processing. After that, the surface is a clear top coat finish..* Caution/Carbon -like water printing processing, the back of this product is not carbon tone.. However, only a part of the carbon -like printing may be performed irregularly.. Please note.■ This material / ABS resin■ This product* Please refer to this product refueling cap cover for each size drawing.● External size / φ70 x height 25 (mm)
● Internal size/φ65 x height 22 (mm)
● Opening and closing knob portion/65 × width 23 × height 20 (mm)* Caution/External size of your genuine refueling cap can be mounted on cars within each internal size. Please be sure to check before purchasing.[Genuine refueling cap compatible size]* Please refer to the following [Toyota genuine refueling cap compatible example/compatible size]..● External size/within φ65mm x within 22mm high
● Opening and closing knob size/within 65 mm in width x within 23 mm long (within 19.5 mm in the center) x height 20 mm"Precautions for mounting work >>* Because this product is imported overseas, there are some processing, small scratches, dirt, burrs, and protruding double -sided tape.. Please note. * This product is a general -purpose product. Not everything is covered. Therefore, some gaps can be seen around the mounting part. Please note. * Mounting work should be performed on a wide flat ground other than the road. * Be sure to stop the engine and apply the side brake before going. After that, open the filler door.(1) Be sure to clean and degrease the genuine refueling cap surface before mounting. * Please remove gasoline, oil, dirt, etc. neatly.. (2) Be sure to provide a temporary match between this product and the genuine refueling cap before mounting. After that, close the refueling port door once and check the opening and closing with the provisional match. (3) After that, remove all the protective cover of the double -sided tape on the back of this product, and paste the genuine refueling cap as much as possible while paying attention to not touching the cutting sticker part. * When pasting, please be careful not to touch the cutting sticker. * Please note that if you attach it on one side and attach it, it may come into contact with the refueling door door. * If you warm the double -sided tape part with a dryer, then paste it to increase the adhesive force. If the temperature is particularly low, be sure to warm up before installing. * Since the double -sided tape cannot be paste, please be careful with the paste work. (4) After pasting, apply a beautiful towel etc. on the cover surface and press several places from directly above.. * Please do not do it because the sticker may come off if you slide and press it. * Adhesion stability of double -sided tape is usually 1 hour. Until then, please do not touch as much as possible. It takes about 24 hours to fix it completely. (5) Finally, close the refueling door door and finish the work.● Western shop original accessory parts! Made -to -order product!
● Western specification Toyota car compatible product Toyota T mark & TOYOTA logo mark sticker set! ( * Customer order)
● With 3D three -dimensional gas station mark (carbon tone)
● With 3D solid motor star mark (carbon tone)
● Luxury ABS resin body! The surface is excellent carbon tone surface printing processing! Glossy finish!
● Designed for Toyota cars! Outstanding feeling! Easy mounting vehicle surface tape stop!■ Import publisher: BRAGA [Braga] ■ Trademark registration: BG BRAGA  [Type 20T/CB] Toyota T Mark & TOYOTA logo mark refueling fuel cap cover [ABS resin/carbon style/glossy finish] Missed product/BragaOverseas shop original [type 20T/CB] Toyota car general -purpose product refueling fuel carbon tone cap cover. Furthermore, it is a very stylish and sporty exterior parts set with compatible products Toyota T mark & TOYOTA sticker.. This product uses a luxury ABS resin, and the surface is high -quality carbon -toning surface printing processing.. Furthermore, the clear top coat is full of luxury glossy finish. Parts that I don't usually claim at all claim to shine at a stretch. By all means [Type 20T/CB] Toyota car general -purpose product refueling fuel carbon tone cap cover as a custom item for your car!
I think you can enjoy a trendy and sporty car life.  "Notes"
* Because this product is imported overseas, there are some uneven, small scratches, dirt, burrs, double -sided tape, etc.. Please note. * This product body and each sticker are not genuine Toyota.. Overseas shop Original parts will be external parts. The sticker will be set and shipped exclusively for customers after ordering. Please note. * Please be careful when handling the sticker part after installation.. Since it is a sticker to the last, be careful not to touch the sticker directly, hook it, or apply gasoline or oil when refueling or cleaning. It may come off. * Stickers may be slightly peeled off due to aging and usage.. Please note. * Carbon -toning surface printing processing, the back of this product is not carbon tone.. However, only a part of the carbon -like printing may be performed irregularly.. Please note. * The color and texture are slightly different from the posted photo and this product. Please note. * This product is a general -purpose product. Not everything is covered. Therefore, some gaps can be seen around the mounting part. Please note. * If this product is extracted after installation, the mounting part may be different depending on the number of installation days due to aging or different deterioration. Please note.★ Free shipping Campaign is underway / Free shipping nationwide! Okinawa/remote islands are also OK!
Shipped by Japan Post [Click posts]! * No cash on delivery * Throw in post / mailbox. ]
* Cash on delivery is not available. In the case of cash on delivery, all Sagawa Express costs 580 yen and a substitute pulling fee of 380 yen.* This product is limited. Please be sure to check the items described in the shipping fee of each product. * Payments are only credit cards, bank transfer, Yahoo! money/deposit payment. * Delivery date / time cannot be specified. * Luggage loss after post throwing cannot be compensated. * You can check the delivery status of luggage with the tracking service. * All purchases of 8,000 yen (tax included) will be shipped with free shipping of Sagawa Express.■ About delivery date
Normally, it is in stock, but due to the sale on other sites, it may suddenly be out of stock. In that case, please note that we may take time to ship. If you are in a hurry, please be sure to check the delivery date before purchasing. |
|
|
