Description of item |
* Please be sure to use a life jacket for safety when using it. ★ Details / specifications
Navigation area: 3 nautical areas (about 5.4km)
Capacity (person) / loading weight (kg): 4/460
Size (cm): 310 in total length, 150, tube diameter 40, deck length 228, deck width 70, aluminum sheet width 85
Weight (kg): Boat body 31.5㎏ + wood floor 6.0kg (6 sheets)
Number of air rooms: 3
Bottom format: Roll -upwood floor stabbie keel 4 bottles
Maximum performance (HP): 10 S shaft
* The maximum performance is up to 15 horsepower, but since it is a standard for two horsepower for domestic use, please use it with 2 horsepower strictly.. Color: Fire Red x Clear Black
Accessories: 2 -piece wide aluminum sheet equipment, aluminum 2 -split all, high -pressure foot pump, repair kit, dedicated carryback, common instruction manual
◆ Material for F -model ◆
☆ Adopts a newly designed roll -up floor. It is now possible to store it in about 50 % compared to the air floor boat. ☆ Motor mount base is standard equipment. Eleks can be used in the bow with optional motor mount
☆ The floor adopts a wide high rigidity black coatwood. High level of hull strength rigidity at a high level
☆ The new design square form secures the highest floor area of the same class, and can be used spaciously with the wide aluminum sheet.
☆ The sideboard material is designed with a didrop protective material specification, enhancing the protection power from obstacles.. ☆ Designed the bottom angle at a sharp angle to increase the wave cutting performance while driving. It became a particularly excellent wave performance among flat boats
☆ Equipped with four stabbie keel on the bottom of the hull. Realizes excellent wind -winding and straightening stability
☆ Equipped with 4 locations that can handle various accessories
☆ Specially adopted thickness of the main body tube and bottom fabric, 0.8 mm, 9 -layer coating processing, special processing color
** If you attach the air floor P200 sold separately by our company, you can use it as an air floor boat.
◆ AF boat material ◆
☆ Realized the largest space efficiency of newly designed long floors and wide aluminum boards
☆ The structural joint is a new material with a new material black color high rigidity -adhesible mall, and the twist and rigidity are compatible at high levels.
☆ Changed the main body boat cloth from 5 layer coat to 9 layer coat
☆ Equipped with two wide -type aluminum sheets
● Adopts a free special seat base before and after slide
● The plywood plywood is changed to high water -resistant and high durable material, and a significant durability is improved by resin coating.
● Equipped with reinforced resin transam pad and transum protective board
● Adopting stainless steel carrying. Equipped with one thick ship rope
● Equipped with an aluminum 2 -split oar. All locks are designed to be wrapped in rope
● A 24mm thick reinforced Transam that stops the power of the engine as much as possible
● Made of lightweight and high -strength 1000 denier PVC
● Anchor roller, rope leader, equipment compatible with equipment
● Adopt the tiered drop mall with a gunnel -shaped shape
● Equipped with a large self -barrier
★ Comment
AF310F. The optional motor mount base is standard equipment and 4 rod holder base is equipped. In the characteristics, we have finally realized the storage and development time that had been strongly requested. The secret is the development of a roll -up floor that can be placed on the floor by splitting and stored in the main unit. Currently, this type has begun to be switched to air floors, especially in Europe. That should be it, about 50 % of the development and storage time compared to the airfore boat. The air floor boat is usually installed on the main unit, and it is full of five places, 3, keel 1, and floor 1, but the AF/F series is only three places in the main body, and the wood floor is usually involved in a normal boat. Since it will be stored in, it will be almost finished when the main unit is filled.. The floor is stable, but the bottom angle was designed sharp to increase the wave cutting performance while driving, making it a particularly excellent anti -wave performance among flat boats. In addition, we reviewed the hull design from scratch, secured the highest class floor area on the long floor, and achieved the largest space efficiency with a wide aluminum board. 2 horsepower limited, long floor and lightweight design can be used as the optimal size for 1 to 4 people. Optional black marine seats can be equipped with two on the left and right, and can be used for a total of 4 equipment.
Since the body material is a high -pressure PVC, the rigidity will be ticking anyway. It is an overwhelming performance.. This boat material uses a new PVC material developed with high strength, low contraction, high rigidity, and lightweight. The main body tube and bottom are 0.9 mm thick, which are outstanding durability.. The newly adopted 9 -layer coating of the boat fabric has been newly adopted with a further increase in strength and a deterioration prevention function due to ultraviolet rays. It is a high -strength design that is convinced by tonamers and hard users for harsh tasks and rentals. Because it is a model with four stabbie keel, the stability of driving and the characteristics that do not rotate without flowing in the wind promise dramatic performance. In addition, this keel protects the bottom of the boat to greatly improve durability. It will be sold with a new warranty. There is no preliminary test for 2 horsepower design. Please use it as a boat for 2 horsepower dedicated license. The AF boat was developed by a professional seabass guide ship captain, marine pro shop, and outdoor unit manufacturer. It is a limited product that cannot be obtained elsewhere and does not sell at mass retailers and other shops. ◆ AF boat is a high rigidity model, so the setting of air pressure when using it is higher than the normal model. Please note the following points.
F /M /MC series standard use pressure
Body 20.0-25.0kpa (200-250mm)
* The pressure will always fluctuate depending on the water temperature and temperature, so please consider it as a guide.. Please do not use it with the maximum pressure or higher. ● Assembly order of AF boat F series
① Attach the aluminum sheet
② The body is filled in the order of the front and side |
|