| Description of item |
★ AF237M Details ・ Specs
Navigation area: 3 nautical areas (about 5.4km)
Capacity (person)/loading weight (kg): 3/270
Size (cm): 237 in total length, 122 full width, tube diameter 33, deck length 170, deck width 56, aluminum sheet width 71
Weight (kg): Boat body 14.0㎏ + wood floor 4kg (4 sheets)
Number of air rooms: 2
Bottom format: Roll -upwood floor stabbie keel 4 bottles
Maximum performance (HP): 2 S -shaft sold separately when using motor mount
* Please use it strictly up to 2 horsepower when using the motor mount.. Color: Clear Black x Snow White
Accessories: BMO Powerful Air Pump, Genuine Rod Holder x 2, 1 wide aluminum sheet equipment, aluminum 2 split All, high -pressure foot pump, repair kit, dedicated carryback, common instruction manual
No preliminary inspection settings
List of genuine attractions ◆ M model for M model ◆
☆ A base that can be mounted on either front and rear is attached. * Motor mount can be sold separately for blackwood specialty products.
☆ Adopts a newly designed roll -up floor. It is now possible to store it in about 50 % compared to the air floor boat. ☆ Boat fabric adopts extremely thick 0.8 mm in this class. Achieving significant durability and rigidity
☆ The floor adopts a wide high rigidity black coatwood. Both hull strength and rigidity are compatible at high levels
☆ The new design square form secures the highest floor area of the same class and can be used spaciously with the wide aluminum sheet.
☆ The sideboard material is designed with a wide 70 mm height, and the body defense power from obstacles is enhanced.. ☆ Equipped with four stabbie keel on the bottom of the hull. Realizes excellent wind -winding and straightening stability
☆ Equipped with 2 places with lots of lots of accessories that can handle various accessories
☆ Equipped with 6 high -strength carrying belts on advanced boats
☆ Anchoral roller, anchor -based, and D -ring equipment are also used for hanging fishing and mooring
☆ Equipped with a dedicated rope and large ring on the front
☆ Realized the largest space efficiency of newly designed long floors and wide aluminum boards
☆ Changed the main body boat cloth from 5 layer coat to 9 layer coat
☆ Equipped with a wide -type aluminum sheet
☆ Adopts a special seat base for free before and after slide
☆ The plywood plywood is highly water -resistant, highly durable material changes, and a significant durability is improved by resin coating
☆ Equipped with an aluminum 2 -split oar. All locks are designed to be wrapped in rope
☆ Specially adopted the main body tube and the bottom fabric, 9 -layer coating processing, special processing color
☆ Made of lightweight and high -strength 1000 denier PVC
★ Comment
AF237M. It is a design that can be mounted on either front and rear as a motor mount boat. It can be used very relaxedly even when used by 3 people with a square exclusive shape.. The width is a tight shape to increase the speed, but it is an exquisite balance that ensures sufficient buoyancy and does not fall too much, making it a strong boat that takes into account the wind, which is a weak point of inflatable. Lightweight is also a major feature.
Most of the boats of this size were made of 0.5 mm to 0.7 mm thick fabric, but the AF boat M series uses 0.8 mm thick fabric to achieve high durability and rigidity.. In addition, the storage and the shortening of the development time were also realized.. The secret is the development of a roll -up floor that can be placed on the floor by splitting and stored in the main unit. Currently, this type has begun to be switched to air floors, especially in Europe. That should be it, about 50 % of the development and storage time compared to the airfore boat. The wood floor is usually stored in a boat, so when the main unit is fully filled, it is almost finished.. The floor is stable. It became a particularly excellent anti -wave performance among flat boats. In addition, we reviewed the hull design from scratch, secured the highest class floor area on the long floor, and achieved the largest space efficiency with a wide aluminum board. Since the body material is a high -pressure PVC, the rigidity will be ticking anyway. It is an overwhelming performance.. This boat material uses a new PVC material developed with high strength, low contraction, high rigidity, and lightweight. The main body tube and the bottom are newly adopted a newly adopted fabric with a newly adopted 9 -layer coat coating and a fabric that enhances the deterioration prevention function due to ultraviolet rays. It is a high -strength design that is convinced by tonamers and hard users for harsh tasks and rentals. Because it is a model with four stabbie keel, the stability of driving and the characteristics that do not rotate without flowing in the wind promise dramatic performance. In addition, this keel protects the bottom of the boat to greatly improve durability. It will be sold with a new warranty. Since it is a dedicated design up to 2 horsepower, please use the engine and electricity up to 2 horsepower. The AF boat was developed by a professional seabass guide ship captain, marine pro shop, and outdoor unit manufacturer. It is a limited product that cannot be obtained elsewhere and does not sell at mass retailers and other shops. ◆ AF boat is a high rigidity model, so the setting of air pressure when using it is higher than the normal model. Please note the following points.
F /M /MC series standard use pressure
Body 20.0-25.0kpa (200-250mm)
* The pressure will always fluctuate depending on the water temperature and temperature, so please consider it as a guide.. Please do not use it with the maximum pressure or higher. ● Assembly order of AF boat M series
① Attach the aluminum sheet * If you have a motor mount, please go before filling.
② The main body is finished in the order of the front and rear. |
|
