Please note that kind of kind

Seal kit contentHow to paste the liquid crystal surface protective film with outer frame
Paste around the liquid crystal, the liquid crystal surface of the transparent seal for the body should be removed from the mount to the other small hole.
LCD surface on the liquid crystal surface of the body protection sticker that remove the self -adsorption film applied to the liquid crystal surface.
Paste the film
Temporary tape from the top two places, one larger in size so that this film cannot be removed immediately.
After pasting, the cellophane tape is peeled off, so there is no need to stick it firmly.
Paste the liquid crystal surface film on the main body side with the body protection sticker pasted.
The paste method from here is a shipping email.
Self -absorbable LCD surface Film replacement is the same size from the second piece, so only the liquid crystal surface film is replaced

Click here for the same model other than this auction Note: The third image is for checking the shape of the protective sticker for the main body.
If you wish, please consider the link on the above.
The protection seal of this auction is transparent and transparent and transparent.
If you paste it on the body color and black, it may be noticeable depending on the construction method. Transparent seal for the main body protection is normal with outdoor light -resistant 3 years left
The paste method that anyone can easily paste is described in the transaction navigation shipping information
Because it has evolved with a shield, it is not a method of using applications such as signboard shops that are difficult to construct professional construction.

For detailed contents of film, refer to the lower row: Film detailed contents Please refer to the reference paste method when purchasing

If you bid on your PC/mobile deviceYahoo a successful bid email Please be able to receive Send from Yahoo after a successful bidHow to purchase in the exhibitioner message field during a successful bid emailAs we are informed
After confirming the contents, please let us know the necessary items, such as the total transfer amount of the deposit destination from the transaction navigation system.
After a successful bid, you can purchase immediately after a successful bid without waiting for the exhibitor's transaction navigation, so during the successful bid email sent from Yahoo
We will inform you of the purchase method.
Contents to be notified
Please be sure to inform you of the shipping destination / remittance destination to us, including simple payments, your desired shipping fee + the total remittance amount.
We will not contact you until the time of shipping is confirmed, so please contact us in the transaction navigation system after payment processing.
If you do not contact us after 24 hours after a successful bid, you may contact us.Please let us know necessary items within 48 hours after a successful bidEven after 48 hours after a successful bid, if you do not make a payment, we will cancel the processing. In this case, the evaluation that is automatically worse than Yahoo will enter

Easy settlement ・ Japan Net, Ebank, Pururu, Mitsubishi UFJ Successful bid mail is currently not sent Payment after a successful bidWithin 48 hours to remove financial institutionsThis auction will be re -listed, so please do not hurry to make a successful bid In the case of mail service shipping request Kuroneko Yamato Male flight only(You can follow the same post after posting the same as ordinary mail) 80 yen+ Amountped bid amount
Please let us know in the transaction navigation after remittance processingFree shipping on many sets (Shipping by ordinary mail is not allowed) Simple packaging with ordinary envelopes (packaging complaint is not allowed
When sending 80 yen (speed 180 yen), there is no guarantee that it has disappeared somewhere, including damage and non -arrival (Yamato content)
If you bend, it seems that many will be posted on the post, so please put it in the post in the postThe shipment number is not announcedSince the number of shipments is large, the shipment number must be announced by mistake, so we will not inform you of the shipping number at the time of shipping.
If you do not reach, please contact us within one week after shipping, we will inform you of the shipping number, so please contact the sales office directly by yourself.
If you have a request, we will contact Yamato to the Yamato. Our original → Yamato mail service 200 yen (speed 250 yen) for a guarantee request (Unknown whereabouts are sent out by Yamato Mail service for free after confirmation)

Normal mail service is about 4 days in the middle of 4 days (for detailsOn Yamato's websitePlease check from Chiba What is the difference in the seal set that arrived?Please check the contents as soon as you arrive, so there are many models, so you may send it by mistake.
If there is a difference in the cut shape different model, it will be a trouble, but please let us know specifically.
Example of description: 1 LCD surface, LCD size different shape, etc.
If you deliver it in a way other than handing, it will be eligible for cooling -off.
Within 8 days after shippingProduct unopenedIf so, it can be returned (if the product is opened, it will not be returned)
Auctions will be canceled with a cost of shipping and transfer fees other than the successful bid amount.
Management of personal information
Do not use only the necessary information for the auction you purchase
Paste in the shipping email Please check the description of the HP and paste it well.Film/seals should be pasted at your own risk, you can't stick it well.
If you can't put it well, the evaluation will be worse than us if it is written from the evaluation field suddenly.
If you are too clumsy, you may not be able to put it well. Those who can put a normal seal in a fixed place about plastic model decals.
If you do not understand anyway at the time of paste, please do not be possible except for Weekdays AM10 to PM 3:00
We will respond to requests/proposals as much as possible.
There are many cases where people who are suddenly pasted without reading the paste instructions sent.
The trick to put on the best is the most difficult to stick without dust if it is transparent.

Those who are nervous, finer, those who are logical, those who can evaluate that they are bad without being able to stick well/If you are required to evaluate (see evaluation method), etc., you will not be able to bid. Welcome to good people ... Many people who can contact us after a successful bid will be limited to the ordinary.

Transparent protective film developed exclusively for liquid crystal surfacesIs not a silicon -based film sold elsewhere From silicon -based adhesive use filmExcellent third -generation self -absorption type filmusing Film thicknessI cut the most easy -to -tension film that we tested (too thick or too thin can not be stretched) Film cut shapeCut in some under size so that it matches the shape of the flat part of the liquid crystal display panel so that it can be easily stretched
(Those who want severe sizes such as 1/10mm units cannot be bid/liquid crystal protection film will not be good if cut in full size) Anyone can put it ...? ?The pasting explanation will be sent by e -mail at the time of the shipment of the shipping ・ No explanation by linking the image paste explanation Protected film is consumableIf you use it, the seal surface will have fine scratches, so usually one is not enough.
Also, even if the clear panel has already been scratched, the wound will disappear by putting this sticker (it depends on the degree of scratches). CautionThere is a place to change the seal shape without notice because of the improvement Since it is cut with a machine, if the back on the cut line around the film is dark, the cut line may be noticeable(If you look diagonal because the adhesive layer on the cut line is pushed by the talent to cut, it may look different from other parts)
Those who are worried are described in the description of the shipping email pasting.
If you put it on a bright color, it is hardly known (the film cut with a machine, not limited to this film, will be the same).
Self -adsorbed type films such as this film and silicon filmIt will peel off if the power to peel off more than the adsorption force is appliedIf you hook and peel it off in the back/pocket, etc., store it on the palm side of the film face.
It is not a silicon -based adhesive that sells by the third -generation self -absorbent use.
The use of films made by major manufacturers developed exclusively for the liquid crystal surface (Hardcoat layer type and touch pen and support, so the response of the touch pen is quick. Characteristic Unlike the silicon -based adhesive that is sold/commercially sold, it has a high transparency and has a weak adhesive power and becomes the maximum adhesion about 3 days after pasting.
Use of self -absorbent material>After pasting, the adsorption power will be stronger than a recon -based adsorption material.
(Silicon system is the maximum adhesive force when pasting, so it is harder to paste when paste). Transparent glossy/matte body protection stickerIn self -adsorption, it can be peeled off that can be attached to this sticker, such as a lot of curved surfaces or decken electricityIn addition to the carbon pattern, wood grain pattern, mosaic pattern color, leather pattern, there are various things.
There are many types of color types, so there are many types of colors that do not easily come off. The number of light -resistant years is 5 years (reference to the bottom image) Washing: You can wash with any type of film, including silicone films.
Washing, dry, drying a small dust, so please use it as soon as you peel it off the mount.
The film itself can be reused, but it usually comes with dust, so usuallyDo not reuseThe seal surface can usually be eradicated naturally under the photovoltaicBacteria cannot be dismissed by antibacterialIf you are used in a place where solar rays do not hit or want to remove bacteria, it is sold in Elliere about 280 yen.
Ekisiac spray: Normally, over -the -counter products about 600 yen
Both should be used after paste the film
Antibacterial can stop the growth of the attached bacteria, but cannot be disinfected with the attached bacteria.
Since the LCD panel has a long life, there is no need for UV rays (UV) measures (backlights gradually become darker due to their lifespan.

Made of seats, seals, and films, such as the LCD surface/transparent body protection, transparent leather, color, and type, with a cutting machine instead of a mold
We first sell and exhibit systems that can support a small amount of models ((note the kind of product))
Recently, good machine good software can be purchased at low cost. Anyone can easily make it for the same mechanical and accurate cutline.
It can be done, but an analog cut shape is required to make it easier to paste into a solid shape.
If you work on a cutering seal and make a 35 -year -old protection sticker, please purchase a favorite person.
The machine is cut with a professional cutting machine, so the curve comes out beautifully.
Occasionally, if you are in a bad mood, the spare machine will be active in that case
The person himselfProduction of single product of original modelAn interesting thing
I'm working hard day and night with a few brain miso?・ ・ ・ I can't do something that I like
You can resell the seals you purchased freely.
A copy of our image/explanation is not possible
I don't want to make it detailed because the contents of the full text are troublesome, but recently there are many unclear successful bids, so I am listening to the ordinary things.
Since it is supported so that you can purchase it easily, please refrain from document contents such as the contents of the information pointed out in the imagination of contacting us.
Please let me know only the content of the reality Example: I can't reach my luggage, but it doesn't seem like this part doesn't fit.