Mitsubishi DVR/BZ240/BZ340/BZ350/Dedicated product/1TBHDD/Use 2191 hours/Used/rare/rare item ☆ F
Auction ends | 4 days |
Bids | no |
Current price | ¥2,000 $14 |
Start price | ¥2,000 $14 |
Buy-now | ¥2,000 $14 |
Consumption tax | 0% included |
Seller | cdh28050 +3341 |
Condition | Used |
Start time | 2024-04-29T23:55:39+09:00 |
End time | 2024-05-06T23:55:39+09:00 |
Auto-prolongation | Turned off |
Lot number | s1115618036 |
Seller position | Chiba ken |
◎ State with HDD diagnostic software "CrystalDiskinfo"
HITACHI/Sata3.5HDD/7200rpm/1TB/
Health condition/normal rotation speed/7200rpm
Number of power throws/370 times usage time/2191 hours
◎ The shipping method is the letter pack light of the post office for 370 yen.
* Anonymous delivery is only Kuroneko Yamato Takkyubin.
◎ Mitsubishi DVR/BZ240/BZ340/BZ350/Dedicated compatible items/1TBHDD/Replacement method ☆
(1) Be sure to remove the power plug of the recorder before work
Remove the ceiling cover of the recorder
Remove only the cable connected to the HDD
Remove all the pedestal and screws that fix the HDD
Replace the HDD in the opposite order, restore it
(2) How to enter the recorder service mode
・ Connect the recorder and TV with an HDMI cable
Turn on the power and wait until you complete the waiting
・ Open the lower panel to the left channel (V) button and power button.
At the same time, hold down and start until the "Hello" display lights (about 10 seconds).
・ When the "Hello" display is lit, release your hand from the pressed button.
Eventually, it will be displayed on the TV screen as "starting"
・ When the TV screen enters the service mode, the remote control of the recorder
Press "5" HDD format, start "Yes"
When "OK" is displayed, press the power button to finish
・ Enter the service mode again and update the "6" serial NO
When "OK" is displayed, press the power button to finish
・ Enter the service mode again and start "1" self -diagnosis
If the result "OK" appears in the HDD column, the replacement will be successfully completed.
Press the power button to finish
・ Turn on the recorder and press "screen display" on the remote control.
It is successful if the "HDD remaining amount" is correctly displayed on the TV screen.
(3) When the HDD itself is not compatible with this recorder or
If the HDD has a life (100,000 hours) or a failure, it will be "NG".
I would like "self -responsibility"..
Time | User | Price |
No bids | ||