SDR reception circuit configuration that emphasizes basic performance
Excellent melee multilateral characteristics by strong RF front end*
RMDR: 113db+
BDR: 127db+
3rd IMDR: 102db+
TX Phase Noise: -143dbc/Hz
Equipped with BPF (band pass filter) divided for each amateur band
Built -in high -speed automatic antenna tuner
Effective conversion removal by high -speed DSP
AESS that produces three -dimensional high sound quality
4.3 inch TFT full color touch panel display
3D spectrum scope display 3DSS
VMI (VFO mode indicator) that allows you to check the operation status at a glance
"Preset" mode ideal for FT8 operation
Equipped with an external display terminal (DVI-D)
*Pearl multiple signal characteristics: 14MHz band 2kHz, TX PHASE NOISE: 100W, CW ModeSDR circuit configuration that emphasizes basic performanceThe twin A/D converter circuit configuration, which is equipped with a high -resolution A/D converter adopted by the top SDR model and FPGA element, and performs digital converter using two A/D converters, is an overloaded. The overflow of /D converter is reduced and the blocking characteristics are improved.. In addition, a random noise is added to the analog signal before the digital conversion, and the distortion is reduced by minimizing the quantization error during the digital converter by the A/D converter, and the design that improves the IM (INTERMODULATION) characteristics is adopted. We have achieved comprehensive performance of SDR receiving circuit..Excellent melee multilateral characteristics due to powerful RF front end and low noise oscillation circuitAdopts a high -resolution 250MHz HRDDS (High Resolution Direct Direct Digital Synthesizer) for a powerful RF front end with a bandpass filter divided for each amateur band and a RF amplifier with a low NF with a low NF.. It is possible to supply high -quality sampling clock signals with excellent C/N characteristics to the A/D converter, and boasts a melee multilateral characteristic comparable to high -end machines.. Even in the sending section, the excellent C/N characteristics due to high quality clock signals from HRDDS, thoroughly pursuing low noise of the circuit, the transmission phase noise at the end of 2 kHz will reach 143dbc/Hz..Effective conversion removal according to high -speed DSPDual Core 32bit 浮動小数点DSP（クロック周波数 594MHz / 198MHz）を採用し、SHIFT / WIDTH / NOTCH / CONTOUR (コンツアー）/ APF（オーディオピークフィルター）/ DNR（デジタルノイズリダクション / NB（ノイズブランカー）などの効果A high -speed digital processing is performed by high -speed digital removal.. In addition to the operating status of the filter and the chase removal function, the spectrum in the passing band is also displayed on the display, so that the passage of the pass band can be easily checked.. Touch the filter function display part and set it quickly with a DSP dial, so you can operate smoothly in contests..AESS (ACOUSTIC ENHANCED SPEAKER SYSTEM) that produces three -dimensional high qualityThe digital process using DSP combines the speaker on the top of the main unit and the side speaker to regenerate a high -quality sound reception with a wide and three -dimensional feeling that is unlikely to be a compact HF transceiver.. You can adjust the output balance and frequency characteristics of the two speakers according to your preference and set it to the optimal sound quality.. * FT-710field requires an optional high-quality external speaker SP-40..Equipped with 3D scope display 3DSS (3-dimensional spectrum stream) High definition 4.3 inch TFT color touch panel displayEquipped with a 4.3 -inch wide large color display, the real -time spectrum scope display uses the FTDX series SDR 3D scope (3DSS) to easily grasp the time change at the signal intensity, set up meters and functions, setting up meters and functions. You can intuitively operate the display settings of the display with the touch panel..Various display display with outstanding visibility and operability Multi function displayThe Multi function display displays the oscilloscope and AF-FFT audio scope on the same screen in addition to the band scope display.. As a result, the AF-FFT function is displayed at the same time while monitoring the receiving band during operation, and when adjusting the audio characteristics of the transmission waves of the opponent's office, the filter and the conversion function of the receiving unit are adjusted. You can also visually check the effects, and you can instantly grasp the overall condition in contests..Waterfall displayYou can switch between 3DSS display and waterfall display by touching "3DSS" on the screen.. The waterfall display part can expand the display time of the receiving signal (history display time) by touching "EXPAND"..VMI (VFO mode indicator)VFO-A, VFO-B, memory mode, clarifier / split operation, etc. are located on the left and right of the VFO dial that shows the operation status at a glance.. The color of the indicator can be selected according to your preference from 4 colors (blue/green/white/red).."Preset" mode ideal for operation of FT8Simply select "Preset" on the Mode screen enables the optimal setting value for "FT8" communication mode, so you can enjoy "FT8" smoothly and comfortably.. By holding a long press of "PRESET", you can easily customize by calling each set item.. It is possible to save up to 5 preset information.Compatible with external display connection (DVI-D digital output terminal)The back is equipped with an external display terminal (DVI-D), so you can connect to a large screen monitor with a digital output.. The USB (Type-A) terminal is also equipped, so you can connect the mouse and operate it on a large screen..Network remote control (remote operation) * Scheduled to be supported soonYou can connect to LAN or the Internet to connect to LAN or the Internet using a LAN unit (sold separately: SCU-LAN10) on the FT-710, and perform remote operations from remote locations.. In the remote operation, in addition to the basic operation of the transceiver, it supports a variety of scope displays, making it possible to operate comfortably even from a far away place..Other practical functions・ QMB (Quick Memory Bank) Function: Call the memory operation status with one touch and start operation quickly
・ Func (function dial) equipment that can easily set functions
・ Compatible with long wire auto antenna tuner "FC-40"
・ SD Card Slot Equipment: Recording/playback of communication, various settings, saving memory contents, firmware update, etc.
・ Equipped with two USB ports (A type, B type)
・ CW operation: CW Zeroin, CW Auto Zeroin, CW Reverse Function, CW Keying Wave shaping, CW Memory Keyer, etc.
・ 3-Stage parametric equalizer
・ Optimal gain selection by IPO (IPO (INTERCEPT POINT OPTIMIZATION))
・ AGC (Automatic Gain Control)
・ Band stack function
・ ATAS active tuning antenna compatible
・ Remote control key pad FH-2 compatible
・ CAT (3 systems)
Rear panel①Tuner / linearExternal antenna tuner/linear amplifier connection terminal
②AntAntenna terminal (M type)
③cooling fan④DC inDC13.8V power input terminal
⑤EXT-DISPLAYExternal display connection terminal (DVI-D)
⑥USB terminal (Type-A)⑦USB terminal (TYPE-B)⑧Rtty/dataRTTY data terminal
⑨KeyyCW key terminal
⑩REM / ALCRemote control key pad FH-2 connection terminal
⑪EXT SPKRExternal speaker connection terminal (φ3.5mm monaural jack)
⑫GndGround terminalaccessoriesHand Mike SSM-75E, nylon carry handle, DC power cable

Time	User	Price
No bids