Auction ends | over |
Bids | no |
Current price | ¥118,800 $823 |
Start price | ¥118,800 $823 |
Buy-now | ¥118,801 $823 |
Consumption tax | 10% not included |
Seller | dachshund_fendi4 +26785 |
Condition | New |
Start time | 2024-04-22T00:54:08+09:00 |
End time | 2024-04-28T17:14:39+09:00 |
Auto-prolongation | Turned on |
Lot number | s1133513986 |
Seller position | Aichi-ken |
・ Single -cylindrical (monotube) structural adoption full length -adjustable harmonic drive kit. ・ Realize a reasonable price as a harmonic drive kit that uses a full length adjustment type. ・ 32 -step reduction force adjustment mechanism is adopted, and a wide range of damping force can be adjusted. Compatible with all driving scenes, from streets to circuits. ・ Uses aluminum upper mount, rock sheet, bracket (partial). Both high strength and weight reduction. ・ Uses a φ44 large -diameter piston unique to a single cylinder type to suppress the delay in the damping force. Realizes supple driving comfort and reliable followability. (Excluding some models) ・ Compatible with overhaul for the first cartridge. Consumables can be replaced with a smooth response from the past. ・ The title of the Hall of Fame has been given as a product that has gained immovable support on the “Parts of the Year” conducted by the car SNS site “Minkara”. ・ It is also possible to upgrade to the electronic control model "SPECDSC Plus" that can adjust the damping force from the inside of the car. |
Car manufacturer | Abarth Abarth |
---|---|
Car model | Abarth 595 Abarth 595 |
Model | 312142 |
Model year | H25.1 ~ (2013/01 ~) |
engine | 312A3/312A1 |
Drive | FF |
Compliant Remarks | The rear attenuation dial is inside the wheel house AT/MT common Only for Japanese specification cars All grades common Includes front upper cover cover Includes rear bump rubber kit |
Manufacturer part number | 92604 | |
---|---|---|
Manufacture name | Blitz Blitz |
|
series | DAMPER ZZ-R | |
Each specification \ before and after | Front | Rear |
mount | genuine | Enhanced rubber |
Spring rate | 5.0 | 5.0 |
Spring free length | 180 | 180 |
Spring type | ST | BS |
Vehicle height adjustment range | -60-0 | -45 ~ -10 |
Rear attenuation dial position | B: Inside the tire house (disk type) | |
Product attached extension dial | - | |
B.R.A.I.N connection | - |
About delivery date |
---|
If there is a manufacturer's stock, it will take 3-4 business days, and in case of missing items, it will take 1 month to make -to -order production.We can not accept any cancellation due to late delivery etc. |
Notes |
---|
* For the rear attenuation extension dial, it is necessary to drill holes in the panel, speaker board, etc. * Please contact the Blitz Support Center for those that are " *" in the upper mount specification. * The vehicle height adjustment range will be adjustable range when the vehicle height is adjusted on the lore bracket side. The adjustment range may vary depending on the grade, vehicle weight, vehicle error, etc. * Even within the vehicle height adjustment range, it may interfere with the inner fender etc. Also, check each car for the minimum ground height and set the vehicle height. * The spring type is "ST: ID62 straight spring" and "BS: barrel type or tapered type spring". * For items that use "genuine upper mount" and "genuine rubber mount", some genuine parts will be reused. Please be careful when installing from a genuine suspension. * If the genuine parts to be reused, it is recommended that you replace them with new parts. * By attaching the DAMPER ZZ-R series, it is possible that the perception range of radar, camera, sensor, etc. used for the recognition of each device may cause malfunction due to the normal state.. Please note that we cannot take responsibility for the occurrence of malfunctions such as safety equipment, collision avoidance support device, and driving support device equipped with car manufacturers, and damages such as accompanying accidents. * When installing the DAMPER ZZ-R series, especially in strut-type suspension, genuine wheels and tires may interfere with shock absorbers. * Damper ZZ-R SPEC-C may interfere with another tank depending on the wheel and tire size you are wearing. * B.R.A.I.N. Even if the connection is a "○" model, it may not be suitable depending on the model year.. Please check the "Touch-B.r.a.i.n." "Smart-B.R.R.A.I..n" compatible table. * When installing DAMPER ZZ-R SPECDSC, a car equipped with a strut tower bar (genuine OP product, external product) may not be able to attach a motor depending on the shape. * Products and prices are subject to change without notice due to improvements. In addition, the above -mentioned models may be discontinued without notice. The vehicle height adjustment range may increase and fall down depending on the individual difference and equipment. * Spring rate: KGF/mm is the unit * The image is a sample of the representative model. All models and grades are not the same shape. * Changes to product specifications and prices, manufacturing and sales may be canceled without notice.* Cancellation, exchange, or returns cannot be accepted by customer's oversight or confirmation mistake.※ fit information, we have updated from time to time but, because there are times when that is updated by the announcement rather than the manufacturer, before ordering sureMaker home pagePlease check the latest conformity chart at. |
Regarding the details of payment, delivery, handled products, etc., ""Shopping guide"Please confirm. ※ Please be sure to confirm the delivery date, inventory and adapted before it makes a successful bid. * Cancellations, changes, exchanges, or returns of orders without prior confirmation cannot be accepted (even if the delivery time takes time)
* Please note that you cannot change after a successful bid. * If you have no contact from our company, be sure to check your self -introduction. We have indicated the long vacation, extraordinary vacation and other notes.
About your order |
---|
|
About payment |
|
about shipping cost |
|
About product image |
|
About return |
|
About Privacy |
|
Other |
|
Time | User | Price |
No bids | ||
No questions.