Auction ends | 5 days |
Bids | no |
Current price | ¥56,519 $388 |
Start price | ¥56,519 $388 |
Buy-now | ¥56,519 $388 |
Consumption tax | 10% not included |
Seller | diving_ya +15791 |
Condition | New |
Start time | 2024-04-27T09:03:08+09:00 |
End time | 2024-05-04T09:03:08+09:00 |
Auto-prolongation | Turned off |
Lot number | u1127933894 |
Seller position | Osaka prefecture |
Following the latest functions of Z-330 Type2, Guide Number 20, optical cable connection standard strobe. A high -performance fly idom lens is adopted, and the amount of light intensity is not damaged by the diffusion plate, etc.. High performance, multifunctional, and lightest in the water achieve excellent performance.. Adoption of flyai dome lens. Achieves 110 ° underwater irradiation angle with large light and low light distribution unevennessAdopted a flyai -shaped dome lens (*1), which is precisely calculated inside the front of the light emitting part, and synergistic effects with the inon's unique T -type twin flash light tube (a patent acquired), a guide number 20 (*2) ). The large light amount and the wide underwater irradiation angle are balanced without attenuating the amount of light with a diffusion plate.. The milk spread plate, which is commonly used, not only increases the irradiation angle, but also damages the amount of light, and has the drawback of heating inside.. Frey idome lenses, on the other hand, expand light using the refractive index of air, acrylic, and water and the elaborate flyer lens shape that enables uniform irradiation without losing light.. While radiating almost all of the high -power emission emissions, the light distribution is suppressed, and the underwater irradiation angle is expanded to 110 °.. Furthermore, the D-200 Type2 clears the length of the flash time, which was a problem with the large amount of strobe.. It reaches in a very short time from the start of light emitting to the maximum flash. At the same time as the high -speed shutter speed of 1/1000, the strobe irradiation can be output to full light emission, even at high -speed shutter speed of 1/1000, including the pre -emission of the camera's built -in flash and the original light. Masu. (*1) Freiere lens dome system that expands the irradiation angle underwater and suppresses uneven light distribution during irradiation. Under applying for a patent. (*2) land value /ISO100 /M, nominal value 12g of buoyancy that is easy to handle underwaterThe D-200 Type2 has about 12g of buoyancy (*3) with four ENELOP AA batteries and a strobolite cutter, and floats slightly underwater.. Attach adapters such as "Z adapter MV" and "Z joint" to make it almost neutral buoyancy in seawater.. Heavy strobes in the water may cause the strobe to tilt or fall with their own weight when the clamp of the connected arm is too loose, but the D-200 Type2, which is almost neutral buoyancy, is a stable optical axis position. Adjustable. Also, light strobes are advantageous for carrying underwater.. (*3) The underwater weight measured in the water is about 7g. It reverses in seawater and has about 12g of buoyancy.. Includes four ENELOP AA batteries and strobolite cutters. S-TTL auto dimming allows fine-tones of light emission simply by turning the "EV. Control switch" on the back of the strobe.. The adjustment range is 3 steps from the standard setting position to the plus side, to the negative side.. You can easily correct it according to the characteristics of the photographer intended or the characteristics of different exposure depending on the camera model.. S-TTL auto dimming/13 steps manual dimmingEquipped with Inon's unique high-precision automatic dimming system "S-TTL Auto" dimming (a patent acquired).. Easy and reliable exposure can be taken. In addition, the optimized high -performance light sensor mechanism can receive light without leaking signals from the camera system.. Even if the light emission from the system is weak or even when the optical cable has begun to deteriorate, the strobe will surely emit light and will be released from the stress of poor light emission.. In addition, it is equipped with a fine 1/2ev. 13 -step manual dimming function. We also provide high -precision lighting for professional use that requires subtle light amount adjustments.. "EV. Controller" to correct the exposure of S-TTL autoS-TTL auto dimming allows fine-tones of light emission simply by turning the "EV. Control switch" on the back of the strobe.. The adjustment range is 3 steps from the standard setting position to the plus side, to the negative side.. You can easily correct it according to the characteristics of the photographer intended or the characteristics of different exposure depending on the camera model.. Equipped with "Strobolite Cutter" that blocks unnecessary direct light to the lensEquipped with a "strobolite cutter" that can be partially cut around the strobe area around the light emitting part. The flare ghost phenomena generated by the strobe irradiation light directly on the camera lens, and the imitation of a floating material that occur when a strobe is placed before the port or before the port is placed. Reduce. "Strobolite cutter" can rotate 360 ° freely. Excellent operability with a moderate click feeling, you can easily and comfortably adjust the position even during shooting.. 220 Lumen, wide irradiation focus light220 Lumen high illuminance power LED, shutter -linked automatic light -to -focus light built -in High -aggregate phosphorescent back operation panel that is easy to see day and nightThe back operation panel is made of high -aggregation phosphorescent material based on white.. The visibility of the panel display has improved day and night. In addition, the back operation switch is enlarged.. It can be operated instantly even through a thick glove. The "EV. Control switch", which adjusts the amount of light, has added a maximum and minimal rotation stop mechanism to make the switch position easier to understand.. Equipped with a heat dissipation mechanism that escapes the heat inside the water into the waterEquipped with a metal heat dissipation ring with a high thermal conductivity around the light emitting part, and adds heat dissipation measures to the electronic circuit.. Each light emission can efficiently release the heat inside the strobe to the water.. By improving heat -resistant performance, the heat problem, which was the task of large light amount strobe, has been resolved.. You can focus on shooting without any anxiety that the light emission stops due to overheating. Recycling time with a minimum of 1.3 seconds even in full light emissionThe recycling time at full light emission (time from full light emission to the strobolore damp to light emit light) is the shortest about 1.3 seconds (*3).. High -speed charge is also realized even in large -light amount. (*3) Recommended batteries (Panasonic "ENELOOP PRO", BK-HCD, 1.2V, min2,500mAh). It is our internal test data (reference value). Various strobe dome filters compatibleVarious strobe dome filters can be easily attached/removed by the bayonet mechanism provided on the front.. Includes "Strobe Dome Filter Soft", which has the effect of protecting the dome lens of strobe and softening light quality. Solded options include "Strobe Dome Filter ND", which reduces the amount of light emission to -4, "Strobe Dome Filter [4600K]", which changes the color temperature of the strobe to 4900K, "Strobe strobe dome filter [4900K]", etc. , Many filters correspond.
|
|
|
Time | User | Price |
No bids | ||