Patch cable set Solderless Providence Providence P203 Solderless Model 2m L -type plug x 8 guitar cable guitar shield
Auction ends | over |
Bids | no |
Current price | ¥9,465 $65 |
Start price | ¥9,465 $65 |
Buy-now | ¥9,465 $65 |
Consumption tax | 10% not included |
Seller | chuya4711 +97542 |
Condition | New |
Start time | 2024-04-20T09:42:42+09:00 |
End time | 2024-04-25T15:09:01+09:00 |
Auto-prolongation | Turned off |
Lot number | v1118962279 |
Seller position | Fukuoka Prefecture |
Providence Provision P203 Solderless Model 2m L type plug x 8 Solderless patch cable set guitar cable guitar shield
You can create a high -quality cable of professional videos with your needed length without using solder. Using the plug of the real use of the utility model, greatly eliminates the concerns of the poor contact that is common in conventional products.. [Features of P203 Model]
The P203 Model of the Platinum Link series uses a hybrid structure of NAP Elastomer and Special Polyetiren as a condactor, and the high -quality sound that could not be realized by the original structure of Providence, such as using a hybrid structure of NAP Elastomer and Special Polyetiren. I succeeded in achieving both the opposite performance of flexibility. It is a patch -only cable aimed only at the connection between the effectors and the effector from the effector to the amplifier, such as making a sound character decision at 1.0m that is not made in other cables.. The "patch cable", which is only short, may cut the essential range or lose weight. P203MODEL was developed to solve these problems and use a "compact effector", which is said to be more likely to deteriorate sound quality, to gain high flexibility without removing the sound quality as much as possible.. Of course, the performance does not change when connecting to rack type effectors and preamplifiers. By using the NP-26GL (L-shaped plug) for Solderless, you can easily make it with your own length just by stopping the screw without soldering a high-performance P203 cable. So. The plug shaft is all 24 gold plating, tightening the cable with two screws (a new proposal) in the plug and plug cap portion and passing the signal.. In addition, by tightening with these two screws, the anxiety of the contact failure has been eliminated, and the structure is to prevent problems that are common in conventional products, such as when cables come out of the plug.. [Specifications]
Providence with NCS3 OFC Patch Cable for Effects
CONDUCTOR SIZE: 0.25mm2
Constraction (No./mm): 50/0.08 OFC
Diameter: 0.65mm
Inner Insulation THICKNESS: 1.18mm (± 0.05)
Diameter: 3.00mm
Outer Insulation Thickness: 0.25mm (± 0.05)
Diameter: 3.50mm
Inner Jacket THICKNESS: 0.25mm
Diameter: 4.00mm
Shield Diameter: 4.50mm
Jacket THICKNESS: 0.75mm (± 0.10)
Diameter: 6.00mm
Maximum Conductor Resistance (20C): 70.70 ≧ (ω/km)
Capacitance (1kHz): Approx.70 (PF/M)
【set content】
・ Solderless cable: 2m
・ Plug: L type × 8
We keep stock products in the Kanto warehouse in addition to the headquarters warehouse (Kitakyushu, Fukuoka). Even if the dispatcher is in Fukuoka Prefecture, depending on the ordered product, if it will be shipped from the Kanto warehouse or order a multiple items, it will be shipped from multiple warehouses and delivered in multiple mouths. There may be. Please note.
You can create a high -quality cable of professional videos with your needed length without using solder. Using the plug of the real use of the utility model, greatly eliminates the concerns of the poor contact that is common in conventional products.. [Features of P203 Model]
The P203 Model of the Platinum Link series uses a hybrid structure of NAP Elastomer and Special Polyetiren as a condactor, and the high -quality sound that could not be realized by the original structure of Providence, such as using a hybrid structure of NAP Elastomer and Special Polyetiren. I succeeded in achieving both the opposite performance of flexibility. It is a patch -only cable aimed only at the connection between the effectors and the effector from the effector to the amplifier, such as making a sound character decision at 1.0m that is not made in other cables.. The "patch cable", which is only short, may cut the essential range or lose weight. P203MODEL was developed to solve these problems and use a "compact effector", which is said to be more likely to deteriorate sound quality, to gain high flexibility without removing the sound quality as much as possible.. Of course, the performance does not change when connecting to rack type effectors and preamplifiers. By using the NP-26GL (L-shaped plug) for Solderless, you can easily make it with your own length just by stopping the screw without soldering a high-performance P203 cable. So. The plug shaft is all 24 gold plating, tightening the cable with two screws (a new proposal) in the plug and plug cap portion and passing the signal.. In addition, by tightening with these two screws, the anxiety of the contact failure has been eliminated, and the structure is to prevent problems that are common in conventional products, such as when cables come out of the plug.. [Specifications]
Providence with NCS3 OFC Patch Cable for Effects
CONDUCTOR SIZE: 0.25mm2
Constraction (No./mm): 50/0.08 OFC
Diameter: 0.65mm
Inner Insulation THICKNESS: 1.18mm (± 0.05)
Diameter: 3.00mm
Outer Insulation Thickness: 0.25mm (± 0.05)
Diameter: 3.50mm
Inner Jacket THICKNESS: 0.25mm
Diameter: 4.00mm
Shield Diameter: 4.50mm
Jacket THICKNESS: 0.75mm (± 0.10)
Diameter: 6.00mm
Maximum Conductor Resistance (20C): 70.70 ≧ (ω/km)
Capacitance (1kHz): Approx.70 (PF/M)
【set content】
・ Solderless cable: 2m
・ Plug: L type × 8
We keep stock products in the Kanto warehouse in addition to the headquarters warehouse (Kitakyushu, Fukuoka). Even if the dispatcher is in Fukuoka Prefecture, depending on the ordered product, if it will be shipped from the Kanto warehouse or order a multiple items, it will be shipped from multiple warehouses and delivered in multiple mouths. There may be. Please note.
Time | User | Price |
No bids | ||
No questions.