* Please be sure to use a life jacket for safety when using it. ★ AF315V Details / Specs
Navigation area: 3 nautical areas (about 5.4km)
Capacity (person) / loading weight (kg): 4/510
Size (cm): 315 in total length, 156 width, tube diameter 41, deck length 230, inner ship width 74, aluminum sheet width 86
Weight (kg): Boat body 30.0㎏ + air floor 7.8kg
Number of air rooms: 3 + 1 + 1
Bottom format: High -press airboard/air keal + stabbie keel
Maximum performance (HP): 10 S shaft
* Performance horsepower is up to 10 horses, but since it is a standard for two horsepower for domestic domestic, please use it strictly with 2 horsepower.. Color: Marine Navy x Snow White
Accessories: Two wide aluminum sheets, aluminum integrated all, high -pressure foot pump, repair kit, dedicated carryback
No preliminary inspection setting for 2 horsepower
List of genuine attractions ◆ V model dedicated material ◆
☆ The center kel uses a center feed V type, which boasts the largest angle in the industry
☆ Extend the stabbie keel of the center to the overall length, increase the size of the side of the side, and change the four stabbie keel to a large size.
☆ Equipped with 8 or more durable strap belts
☆ Equipped with 4 gunnels D -ring+4 lifelines
☆ High rigidity, high pressure, lightweight high -grade airflow adoption. With slip prevention processing
☆ D -ring equipment that can fix tackles etc. on the air floor
☆ Equipped with 4 locations that can handle various accessories
☆ Equipped with a mounting base that can be attached to the motor mount sold separately
◆ AF boat material ◆
☆ Realized the largest space efficiency of newly designed long floors and wide aluminum boards
☆ The structural joining part is a new material with a new material black color high rigidity -adhesible mall, and the torsion and rigidity are compatible at a high level.
☆ The main body boat cloth is a 9 -layer coat dedicated to the V series
☆ Equipped with two wide -type aluminum sheets
☆ Adopts a special seat base for free before and after slide
☆ Changed the plywood to high water resistance and high durability, and greatly improved the durability by resin coating.
☆ Equipped with reinforced resin transham pads and Transam protective boards
☆ The front part is made of stainless steel carrying. Equipped with one thick ship rope
☆ Equipped with an aluminum 2 -split oar. All locks are designed to be wrapped in rope
☆ Specially adopted body tube and bottom fabric are 0.9 mm, 9 -layer coating processing, special processing colors
☆ Golden ratio of strength and lightness 18 mm thick black coat reinforced Transam + One -touch slide baller specification
☆ Made of lightweight and high -strength 1000 denier PVC
☆ Anchoral roller, rope leader, equipment compatible with equipment
☆ Adopts the tiered -drop -shaped high -performance anti -side side material all over to protect the flooding on the ship.
☆ Mandatory internal pressure automatic valve standardization during the summer high temperature period
★ Comment
The latest model adopts black color in the carrying belt. The main body material is a high -pressure PVC, which has excellent rigidity and durability. It is an overwhelming performance.. This boat material uses a new PVC material developed with high strength, low contraction, high rigidity, and lightweight. The main body tube and bottom are 0.9 mm thick, which are outstanding durability.. The newly adopted 9 -layer coating of the boat fabric has been newly adopted with a further increase in strength and a deterioration prevention function due to ultraviolet rays. It is a high -strength design that is convinced by tonamers and hard users for harsh tasks and rentals. It will be sold with a new warranty. There is no preliminary test for 2 horsepower design. Please use it as a boat for 2 horsepower dedicated license. The AF boat was developed by a professional seabass guide ship captain, marine pro shop, and out -of -ship outdoor unit manufacturer. It is a limited product that cannot be obtained elsewhere and does not sell at mass retailers and other shops. ◆ AF boat is a high rigidity model, so the setting of air pressure when using it is higher than the normal model. Please note the following points.
V series standard use pressure
Body 20.0-25.0kpa (200-250mm)
Air Floor 30.0-40.0kpa (300-400mm)
Airkeir 15.0-20.0kpa (150-200mm)
* The pressure will always fluctuate depending on the water temperature and temperature, so please consider it as a guide.. Please do not use it with the maximum pressure or higher. ● Assembly order of AF boat
① Fill the airfore first
② Attach the waistboard
③ The main unit is filled in the order of the front and side, and finally the air quir is filled and finished |
|
Depending on the shipping size, additional shipping and relay fees are charged in Hokkaido, North Tohoku, Okinawa, and remote island areas. Please refer to the shipping table for details. We will add additional shipping costs when your order is confirmed and send by e -mail. If a relay fee is charged in the remote island area and the amount is added, we will present the additional amount to the customer in advance. The relay fee calculation will be shipped after receiving the consent, so please answer the contact. ● Delivery may change slightly due to traffic conditions, changes in transportation companies, and weather. Please consider the specified date and time as a rough guide. Please note that depending on the delivery area, the delivery may not be in time for the desired date and time. ★ Please note that business hours are AM10 to PM4, maintenance on Wednesdays, Saturdays, Sundays, summer vacation, GW, and year -end and New Year holidays.Notes★ All new boats and engines are included with a dealer sales certificate and comes with a manufacturer's warranty. ★ New engines purchased by us can be shipped nationwide and can repair maintenance after purchase. If you wish to respond to maintenance, be sure to leave the original box. We will reply to the destination after contacting us. (The maintenance factory specified by us does not accept outdoor units other than the original box)
