B & D shift plate mounting position adjustment for telemarks
Auction ends | 6 hours |
Bids | no |
Current price | ¥18,989 $131 |
Start price | ¥18,989 $131 |
Buy-now | ¥18,990 $131 |
Consumption tax | 0% included |
Seller | chic_gogo +5569 |
Condition | New |
Start time | 2024-04-27T05:52:00+09:00 |
End time | 2024-04-27T20:52:00+09:00 |
Auto-prolongation | Turned off |
Lot number | w1117207317 |
Seller position | Tochigi Prefecture |
Adjust the binding position without drilling a hole in the 4 -place binding ski, aluminum plate that can move a total of 3cm before and after and 1cm at intervals of 1cm.. 3pin binding can be attached, but it is not possible to move. Weight: ≒ 300g (including 1 pair / screw) thickness: 6mm. Price: 14600 * Binding is not included. Only shift plate. Letter pack plus
The vertical direction can be fixed at 11, 12, 13, 15, 17, 17, 18 cm in the vertical direction with 26 mm between the horizontal center and the vertical direction.. For example, a G3 binding with a 4 -point stop can be attached.. As an image, it seems that almost any binding can be attached to a board that is processed by K2's enzer biz processed.. For your reference. The plate is 6 mm, 184 mm x62 mm aluminum plate.. The heel support side also has a shift plate. This size is 110 mm x43 mm. The mounting screws are included. The dish screw to attach a binding to this plate is on the 4 types of lengths, which are sold from 12 B & D each from each B & D.. The length is 3/8, 1/2, 9/16, 5/8 inches. I think it can be attached with these combinations. , Please use the screws used for binding to fix the board and plate.. (Not originally included)
Please refer to yourself before bidding. Notice of product holidays, etc.
The vertical direction can be fixed at 11, 12, 13, 15, 17, 17, 18 cm in the vertical direction with 26 mm between the horizontal center and the vertical direction.. For example, a G3 binding with a 4 -point stop can be attached.. As an image, it seems that almost any binding can be attached to a board that is processed by K2's enzer biz processed.. For your reference. The plate is 6 mm, 184 mm x62 mm aluminum plate.. The heel support side also has a shift plate. This size is 110 mm x43 mm. The mounting screws are included. The dish screw to attach a binding to this plate is on the 4 types of lengths, which are sold from 12 B & D each from each B & D.. The length is 3/8, 1/2, 9/16, 5/8 inches. I think it can be attached with these combinations. , Please use the screws used for binding to fix the board and plate.. (Not originally included)
Please refer to yourself before bidding. Notice of product holidays, etc.
Time | User | Price |
No bids | ||