JBL Professional 305P MKII Powered Monitor Speaker DICON AUDIO SS-032R Table Stand Pair Set
It is a set product with a desktop stand attached to JBL Professional 305P MKII Powered Monitor speaker.. set content
・ JBL Professional 305P MKII Powered monitor speaker X2
・ DICON AUDIO SS-032R Desktop monitor speaker stand pair
------------------------------------------------
■ JBL Professional 305P MKII Powered monitor speaker
Powered studio monitor that has improved the driver and has evolved significantly. 3 Series Mkii has improved the reputation "LSR 3 Series" driver, and has greatly evolved in reproduction.. The low -frequency driver improves the distortion of the magnetic field surrounding the voice coil by reviewing the magnetic structure, achieving more accurate piston movements.. The conversion accuracy from the input signal to the vibration has increased, and the original sound is extremely reproduced.. The power compression (reduced effectiveness) is small, and even if the loud volume is played continuously, the change in sound quality is minimized.. In addition, the high -range driver adopts a magnetic fluid that plays a role in cooling and braking the voice coil.. Thoroughly analyze the magnetic fluid and re -adjusted to the viscosity that does not hinder the operation on the input signal while properly braking voice coils.. You can now reproduce the sharp and fine changes in the rising sounds more accurately.. Outputs a clear sound, combined with a high magnetic neodymium magnet.. Furthermore, in order to maximize the performance of each driver, we adopt a bi -amplifier drive that combines the fourth Linkwitz Lily's active crossover and high -efficiency class D power amplifier.. 3 Series Mkii will generally introduce JBL's unique technology and provide accurate monitor performance.. The high frequency is equipped with an image control wave guide developed for the top studio monitor "M2".. Excellent reproduction of sound images, play a wide stereo sound field that extends outside the speaker.. The central sound image is more clear than ever, and you can accurately grasp the depth of the sound field and the size of the sound image.. The depiction ability of the details has also increased, and the sound source is delicate in the high -density mix and the feeling of air in the sound field to the engineer.. Because of the wide listening point, sound quality and balance can be determined accurately outside the axis of the speaker.. In addition, the LSR (Linear Spatial Reference) design is used to demonstrate excellent monitor performance even if the shape and volume of the room to be installed are different.. The output performance has been optimized by 360 degrees around the speakers, directly on sound, reflected sound, and reverberation sounds.. Furthermore, the low -frequency port is a unique slipstream design with a rounded roundness on both sides of the opening, reducing the turbulence and outputs a deep and deep range.. 3 Series Mkii has many useful functions. The input terminal is equipped with XLR and standard pawn jack (3P), and can be selected from+4dbv and 10dbv.. Also equipped with an EQ switch to apply a 1.5 dB or 3DB shelling filter in the high frequency (4.4kHz) and a 1.5db or 3DB shelling filter to the low range (50Hz).. You can fine -tune frequency characteristics according to the installation environment and application. Adjusting the output volume adjustments with 21 steps clicks, making it easy to reproduce the settings.. Each driver has a magnetic protection measure and does not affect the surrounding devices.. 【specification】
・ Frequency range (-10db): 43Hz to 24kHz
・ Maximum sound pressure level (1m, C weight): 108db SPL
・ Driver configuration:
LF: 5 inches (127mm)
HF: 1 inch (25mm)
・ Crossover frequency: 1,725Hz
・ Power amplifier: 41W × 2, Class D
·input:
Terminals: XLR or standard phone (3P)
Input sensitivity (-10dBV, 1m): 92db SPL
Maximum input level (+4dbu):+20.3dbu
・ Power: AC100V, 50/60Hz
・ Dimensions (W × H × D, exclusion protrusion): 186 × 298 × 242mm
・ Mass: 4.7kg
・ Accessories: Rubber feet x 4 (1 sheet), power cord, Japanese text instruction manual
----------------------------------------------
■ DICON AUDIO SS-032R Desktop monitor speaker stand pair
The SS-032R is a desktop monitor speaker stand that can adjust height.. By changing the height of the speaker, it makes it easier to hear the sound and improves the monitoring environment.. In addition, it can be used effectively to the space that has been putting speakers so far, which will help build a more comfortable music production environment.. 【Features】
・ Adjustable height from 19cm to 28cm. ・ Equipped with a safety bar. ・ Cushion is placed on the speaker installation surface. ・ Lavar cushions are placed on 4 locations of the foundation plate. ・ Adopt durable steel. ・ Load capacity 15kg. ・ A tool is also included, and it is easy to assemble. ・ 1 pair (2 units). [Product content]
・ Foundation plate x 2 sheets
・ Speaker installation plate x 2 sheets
・ Polar (with safety bar) x 2
・ Screws (short) x 2
・ Screw (length) x 2
・ 1 wrench x 1
【specification】
■ Foundation plate size: 250mm x 250mm x 2mm
■ Speaker installation plate size: 225mm x 225mm x 2mm
■ Speaker installation surface cushion seat size: about 225mmx58mm
(The width between the cushion seats is about 107mm)
■ Height: 190mm to 280mm
■ Body weight: about 2.3kg per unit
■ load capacity: about 15kg

---

We keep stock products in the Kanto warehouse in addition to the headquarters warehouse (Kitakyushu, Fukuoka). Even if the dispatcher is in Fukuoka Prefecture, depending on the ordered item, if it will be shipped from the Kanto warehouse or order a multiple items, it will be shipped from multiple warehouses and delivered in multiple mouths. There may be. Please note.

---

Time	User	Price
No bids