Engine -carrying type mowing machine 4 cycle 35.8cc silent silent vibration! The work width is wide and the work width is wide and weeds and bamboo bamboo are crunchy! 4 strokes in a brush cutter
| Auction ends | over |
| Bids | 30 |
| Current price | ¥100 $1 |
| Start price | ¥100 $1 |
| Consumption tax | 0% included |
| Seller | gtstt3233 +2653 |
| Condition | New |
| Start time | 2024-03-21T22:40:11+09:00 |
| End time | 2024-03-28T22:40:11+09:00 |
| Auto-prolongation | Turned on |
| Lot number | b1129560403 |
| Seller position | Kyoto |
| ◆ Engine -carrying type mowing machine 4 cycle 35.8cc silent static vibration! The work width is wide and the work width is wide and weeds and bamboo bamboo are crunchy! 4 stroke of a brush cutter ◆ | |
| Description of item |
● The engine type powerful power can be cut from weeds to stubborn bamboo bamboo and fine trees! ● The mowing machine carries can distribute the weight load on the body, so it is hard to get tired even in long hours of work! ● Since the work range can be widened compared to the shoulder type, etc., it can be cut freely, such as above and below the slope! ● Work comfortably with a backpack with a back pad! ● Equipped with a small accessory part on the backpack! ● Uses a spring mount that absorbs the vibration of the engine! ● Adopt a small lever with excellent grip and accelerator operability! ● Compared to 2 cycles, 4 cycle 35.8cc with quiet and quiet movement! ● For those who are worried about the noise at the time of use, a 4 -cycle engine is recommended! [Product content]: Engine -carrying type mower 4 cycle 35.8cc [Mowing type]: On the back [Engine type]: Spark plug type 4 cycle [Displacement]: 35.8cc [Start method]: Recoil type [Used fuel]: Gasoline (mixed oil is not used) [Engine lubrication oil]: 4 -cycle lubricating oil [Color]: Orange / Red Red [Others]: A round blade chip saw included (230 x 25.4 x 36t type) [Weight 1]: Approximately 5.7kg of engine section (including pipe skeleton, without oils and fats) [Weight 2]: Approximately 0.8kg of backpack [Weight 3]: Approximately 2.3kg of shaft part (including handle / covers, without tip blade) [Weight 4]: Flexi Horse part about 1.2kg [Weight 5]: Tip about 0.3kg (230 x 25.4 x 36t type) * All weights are the measured values ○ Notes ○ * Be careful of burns because the engine gets hot when you use it or immediately after that. * During use, wear glasses and protective equipment and be careful about the bouncing and stepping stones of the blade.. * Please do not use it in places where your feet are unstable. * Please use in the proper rotation range without unnecessary engine rotation when used. (To prevent engine injury and burns, it is usually used in the semi -opening area of the accelerator in normal times) * Please refrain from remodeling/strong shocks other than the original purpose. * Please note that we will not be liable for any trouble, damage, or loss due to the use of this product. * Please note that it may be changed without notice for improvement such as specifications and designs. * Please note that there are cases where there is a small difference between the color and shape from the real thing because the photo is a reference example. * This is packed in 2 boxes because there are many components.. * Please note that the cargo of multiple mouths may be divided into multiple shipping companies..○ At initial use ○ * When the product arrives, check the operation of the engine first before assembling. The procedure to start the engine 1: Insert fuel and engine lubrication oil. 2: Press the pump and turn the fuel into the carburetor. 3: Open the chalk (Turn on the upper and lower lever next to the air cleaner box (mainly lower, such an LLL mark side)) 4: Pull the coil vigorously and turn it. (Normally, it will take about 5 to 10 times) Please refer to the photo explanation for the procedure to start the engine. * If the engine does not start at this stage, it may be necessary to have a ignition system recognition or a carburetor / throttle fine adjustment. * After confirming that the engine starts, assemble a hose or shaft with reference to the photo. * At the time of the factory, the operation of the engine is checked, so there may be a small amount of fuel left inside. * If you want to turn off the engine, press the button on the lever at hand (off side depending on the model) or close the chalk. * If you are not familiar with the engine mechanism, please check the operation and operate after receiving advice to those who are familiar. * Please note that it is not possible to guide you to the operation method and procedure individually. [Other / Regarding transaction details] ◎ We will respond to initial failure for one week after the product arrives. (In the case of initial failure, we will respond to replacement or parts supply. ) ◎ In the case of parts supply, it may take some time to import parts. ◎ I am very sorry, but the product is available, but the shipping cost for exchanging, supply, etc. will be paid.. ◎ In addition, damage and processing that are not caused by products, such as usage that cannot be considered normally or in poor environment, are not eligible. ◎ Since the initial failure correspondence is only for the product, we do not take any responsibility for other accompanying damages or accidents. ◎ Returns and refunds are basically not possible after the exchange. ◎ Since this is an imported product, I think that there are some points that are sweeter than Japanese products, detailed scratches, external box stains, etc. (Mild dents and scratches that do not interfere with use are not made of complaint). ◎ The shipping fee will be the shipping fee listed on the auction page. (By only the original payment shipping, it is not possible to specify the shipping company, specify the date and time, or pick it up directly. ) ◎ If you purchase multiple sets, shipping costs will be charged for each set. ◎ After a successful bid, you can contact us within 48 hours, and only those who can pay within 2-3 days should bid. (If you can not do it, please note that we will delete it for the convenience of the highest bidder. ) ◎ Bidding equal will be able to agree with the above contents. |
| Payment Method | ■ Yahoo! か ん た ん settlement of accounts |
| This guide is an exhibition support tool ■@Immediate Sale 3.20 ■ It is created in. | |
| Time | User | Price |
| No bids | ||
No questions.
