On -board plug heat system 3 cylinder glow engine controller and cable clip set instructions Nationwide shipping 185 yen uniform
Auction ends | over |
Bids | 1 |
Current price | ¥4,680 $33 |
Start price | ¥4,680 $33 |
Consumption tax | 0% included |
Seller | seiichi708 +1024 |
Condition | New |
Start time | 2024-03-26T19:18:31+09:00 |
End time | 2024-03-29T19:18:31+09:00 |
Auto-prolongation | Turned on |
Lot number | b1129771016 |
Seller position | Hiroshima |
Motor -equipped type glow engine plug heat system for 3 cylinders
Connect the controller to an empty channel and ON with a transmitter. Mixing with throttle and plug heat only for slowing is also possible. Since the settings also have an LED display, the point setting of ON OFF can be visually visually. The controller is compatible with 4.8V to 6.4V Life, LIPO 2S high voltage. For plug heat, insert 1.2V Nikado batteries and nickel hydrogen batteries into the battery box.. It is stable because the plug heat is heated for each cylinder. Eneloop is recommended and the capacity is sufficient, so you have 5-6 flights. The plug heat battery is different from the receiver battery, so it has no effect on the radio control system and is safe. The exhibition is a controller, battery box, and cord crocodile clip. The battery and servo tester in the photo are not included. The color of the cable and the clip varies depending on the lot. Please connect to the receiver alone by this set. Please note that if you connect to the servo in parallel with a branch code, it will cause a malfunctioning operation. Please attach the 3 batteries in the direction described in the battery box.. Please note that the glow plug will be damaged if the polarity is wrong.. No question after a successful bid No comment No comment Please purchase if you can protect the no claim. Safe post office click post nationwide 185 yen uniform
We will exhibit the 4 -cylinder for 2 cylinders for 1 cylinder, so thank you.. If you wish, please contact us for the instructions by message.. We will enclose the instructions describing the connection method and the mixing method of throttle channel and plug heat.. O.S.Model Factory., JAPAN
Connect the controller to an empty channel and ON with a transmitter. Mixing with throttle and plug heat only for slowing is also possible. Since the settings also have an LED display, the point setting of ON OFF can be visually visually. The controller is compatible with 4.8V to 6.4V Life, LIPO 2S high voltage. For plug heat, insert 1.2V Nikado batteries and nickel hydrogen batteries into the battery box.. It is stable because the plug heat is heated for each cylinder. Eneloop is recommended and the capacity is sufficient, so you have 5-6 flights. The plug heat battery is different from the receiver battery, so it has no effect on the radio control system and is safe. The exhibition is a controller, battery box, and cord crocodile clip. The battery and servo tester in the photo are not included. The color of the cable and the clip varies depending on the lot. Please connect to the receiver alone by this set. Please note that if you connect to the servo in parallel with a branch code, it will cause a malfunctioning operation. Please attach the 3 batteries in the direction described in the battery box.. Please note that the glow plug will be damaged if the polarity is wrong.. No question after a successful bid No comment No comment Please purchase if you can protect the no claim. Safe post office click post nationwide 185 yen uniform
We will exhibit the 4 -cylinder for 2 cylinders for 1 cylinder, so thank you.. If you wish, please contact us for the instructions by message.. We will enclose the instructions describing the connection method and the mixing method of throttle channel and plug heat.. O.S.Model Factory., JAPAN
Time | User | Price |
No bids | ||
No questions.