Thank you very much for seeing it. ■ Handmade paper weight "Cross Tower / C type"
One stainless steel is listed. ● Paper weight "Cross Tower / C type" ------------------------------------------------
Carving and wiped processed products
Material specifications:
・ Cross: Stainless steel plate, 2B specification/SUS304, plate thickness: 2.0mm,
・ Tower: Stainless steel circle steel, SUS304 / lathe processed, 25mm diameter
Outside:
・ Base: 25mm diameter, height: about 131mm,
·surface treatment:
Overall, buff polished and mirror polishing processed with hairline.. Fine scratches of polishing marks on the polishing surface and fine pinholes of the material itself
remain. ▲ Product description:
・ Simmer grinding, polishing, and carving from one cut plate by self -made.
We will exhibit "paper weight" that combines the tower that has been put out.. The upper top plate of the tower is metal with a depth of about 5 mm deep and metal is metal.
The cross is about 5mm depth, so the depth of the cross is wiped on the part that overlaps each other.
I joined by. *Lowholes: Heat the joint part with a burner until the metal turns red.
It is a method of joining the silver roux into the joint part (about 750 degrees).. *If this paper weight is dropped from a table to a hard floor, etc.
Be careful when handling because the part may bend or the joint may break.
Please. Repair (paid), such as repair (polishing, joining processing, etc.) after purchasing
I will do it. The exhibited product is not a commercial product but a hand craft product I created.. ・ The material is stainless steel SUS304. Please use it by all means. ***************************For those who can understand, please bid with no claim no return. Please note that there may be times when contacting here may be delayed due to work..