Appeared in the Hollywood movie "Wild Speed"Red RX-7 (FD3S)The sound when locking the door
If you are looking for a so -called "Dominic Sound", you must see it !!!
Demo video (YouTube)
1. In the case of a car that has a genuine keyless and does not flash hazardhttps://youtu.be/onlayytpz1i
2. In the case of a car that flashes with a smart key and originally flasheshttps://youtu.be/oe2ugeikgb8
3. Added a paid option shock sensorhttps://youtu.be/qhlyzs_gunk
4. Paid option VIPER 516U Viper Module & Shock Sensorhttps://youtu.be/5ao-uwzi5i
5. Added a paid micro wave sensorhttps://youtu.be/zb-0fazo1y0
■ Basic operation:When the door lock and unlocked, the prescribed number of charpo sounds sound, and the left and right turners or position lamps are changed once when they lock and twice at unlocking. It does not work during the ignition ON or the engine starting.★ Smart key equipment vehicle compatible, with delay function!* When the delay function is turned on, the charter sounds a little later so that it does not cover the genuine buzzer sound.
★ Two light flash output lines,+/-poles are supported!* Add a hazard or position lamp for a door lock, etc.
★ VIPER 516U Voice module is also linked!* Viper/516U Voice module is in guidance at a special price. Please see the product description to the end.
★ A safe Japanese installation & instruction manual is included!* The common content in Yahoo auction is not thin, but it is a work manual prepared for the dealer.
★ Wiring data is available only for some domestic cars!* Please contact us by the name of the car type, year (year) and model from the question column for the existence of wiring data.■ Setting function:J1. Selection of siren type: Set by siren connected at the time of mounting. J2. Charp sound, number of times: 1 time at door lock/twice at unlock, or 2 times at the door lock/Unlock 3 times.. J3. Charp sound, delay setting: If you set it with a delay, it will not work immediately after the door lock and unlock, and the charter sound will sound after a while.. It is a function to prevent the genuine buzzer sound when this product is attached to some smart key equipment vehicles. * This product changes the setting by replacing the jumper pin. J1, J2, and J3 J are abbreviated for jumper pins.■ Others:In order to avoid malfunctions that occur when the auto -unlock function works, the chart does not sound during the first unlock after the key is OFF.
********************************************************************************************** *****************************Finding this sound for 5 years, I watched more than 100 kinds of sirens (not exaggerated) and finally reached a satisfactory sound. Dominique finished the straight race with Brian, stopped the car at the parking lot of the multi -tenant building, dashingly [LOCK] "Kyon!" I saw this scene tens of times (laughs)
★ One scene of wild speed.It was also on YouTube, so if you like it, please take a look.http://youtu.be/o1cmv5tDRU4* This video has nothing to do with this product.
I tried many sirens, including viper and Clifford to make money, but it was not easy to find a sound and deep sound in that sporty sound. That should be it, because the sound in the movie is originally a production, so it uses a pseudo sound to add coolness. However, there should have been a model model that was created even though it was the sound that was created. In fact, I have seen an article on the Internet that it resembles the sound of American Alpine car seculity, but unfortunately it seems that the sale ended a few years ago. Dominic sound has a commercially available 6 -tone (type with six types of sounds in order) and one tone (a type with one type of single -trout sound). The sound of the siren depends slightly on the shape and structure, but the most important thing is the sound source inside the siren that determines the sound itself. The general siren plays a single melody, while Dominik Sound has an analysis of a manufacturer an analysis of a three -dimensional sound by the treble horn and the bass horn sound at the same time like a luxury car horn (horn). We also considered how to attach two like a horn, but because of the mounting space and other problems, we requested the creation of an original rom to create a three -dimensional sound with one siren by adding a special sound source to the first part of the sound, and it was finally completed after trial and error. Of course, the control unit that controls the attached siren has been carefully disclosed to 1/100 seconds by completely original specifications (tuning). By all means, thank you for [Dominic Sound+].
★ Please take a demo video again!https://youtu.be/onlayytpz1i
********************************************************************************************** *****************************
■ Q & A! This is a common question.Q: Do you adapt to any car?A: This product is exclusively for 12V cars, and 24V vehicles cannot be installed. In addition, it does not support a special vehicle that does not drive by an electric motor, such as a partial benz, or some imported vehicles that control the door lock or unlock by MOS-FET, but can be attached to most domestic vehicles.Q: Is there a manual? Is it possible to prepare wiring data?A: The Japanese manual will be bundled. In addition, wiring data is available only for some domestic cars that can be referred to during work. There are no models, so if you wish, please contact us with the name, year and model of the car from the question column once before the bid. However, the information described in the wiring data may differ from the actual car depending on the production line, so please consider it for reference only.Q: Is it possible to use it with the engine starter?A: Basically, there is no problem, but when the Ensta function is activated, the answerback system is automatically turned off.Q: Where is the light output line connected?A: Neither lamps to blink when keyless activates are connected to the winker lamp wire. When the left and right blinker lamps light up, connect to the line where the voltage rises to the area around+12V, and connect the light output polarity,+/-selection coupler red line coupler and green line coupler. Vehicles that blink the left and right winker lamps when smart keys or keyless are operating are connected to the position lamp. When the position lamp is lit, when connecting to a line where the voltage rises to+12V, connect the light output polarity,+/-selected coupler red line coupler and green line coupler. If you connect to a combination light switch line, which is usually a voltage, short circuit the line to the body ground (dropped to the ground) and the position lamp lights up to the combination light switch line, connect the light output polar,+/-selected coupler black line coupler and green line coupler. If all position lamps can be controlled with one light output line, insulate the remaining light output lines. To a vehicle with two left and right systems, connect two light output lines to each as the same as when connected to the winker lamp. * Vehicles whose part position lamps cannot be replaced are adopted for controlling the entire head lamp unit, and the position lamp may not light even if the wiring is connected correctly.Q: Is it difficult to install this product?A: Work requires certain skills and experience. In general, the mounting of this product is fixed in the engine room and the main unit is wiring indoors. Because it is not wireless, it is necessary to pull the siren wiring into the room and connect to the main unit. The connection of the main unit is always power supply+12V, ACC or IG (ignition), ground, ground, lock, and light output lines that increase the voltage to the area around+12V, respectively. The connection of the light output line is optional. Power supply+12V, ACC or IG (ignition) can be found from audio couplers, key cylinder harness or junction block couplers, etc. For Earth, genuine earth points are the best. The lock and unlock motor line are searched from the wiring that connects to the driver's or the door lock motor on the passenger side, but there is one wire (plus signal flows) where the voltage rises to the area+12V when a general door lock motor locks or unlocks. The Japanese manual has an illustration, which is easier to understand than this commentary.Q: If it can be installed, is there any option to be needed other than the product?A: There is no option, but depending on how you attach it, you may need a stay or bolt to fix the siren. Also, if the length of the wiring is not enough, please use a commercially available heat -resistant code. You can purchase from home centers and car supplies mass retailers. Please consider paid options as needed. Not recommended for everyone.Q: If this product is attached, will the genuine "Pi! Pip!" Sound disappear?A: This product is an independent system that detects the door lock and unlock plus signals on the vehicle side, so the genuine sound will still sound as before.Q: My car is a negative control system, can it be installed?A: It's a very common misunderstanding. Most of the people who ask this question have mounting a model with a keyless or keyless function. As you know, the wireless method used is a negative control system when attaching keyless functions to most Toyota cars and many vehicles released in recent years. In addition, the common point of a vehicle that attaches keyless functions with a negative control system is that there is an electrical lock and an electrical intensive lock switch linked to all door locks and unlock functions. To put it simply, the electrical intensive lock switch on the vehicle side controls the vehicle side door lock or lock motule with a negative control system, so when attaching a keyless function, it is connected by the same negative control system, but this product is fundamentally different from the keyless function. The keyless function controls the vehicle side door lock and unlock, and this product is a system controlled by the plus signal of the vehicle side door lock motor. At the current stage, the mechanism of the door lock motor used in most domestic vehicles is common to general DC motors, and there is a line (channel) that always increases the voltage one by one when locking, unlocking (correct or reversed). Therefore, except for some special vehicles, most vehicles can be attached to this product.Q: We will ask the shop to install it, but how much does it cost?A: Please check the work time and labor directly with the worker. There are cases where the work is refused because of the bring in, so if you are entrusted with the installation, please be sure to introduce this product description to the store before a successful bid. After confirming the contents, please ask for an estimate first. If you can't quote, it may be wise to find another shop. Since the wiring, which is also the blood vessel of your car, you can be a true car -loving "professional" that you can trust.Q: Are there any points to be aware of when handling products?A: Siren is not a waterproof specification, but if it is inundated or attached near the heat source, it may cause a failure. Please note that it is not eligible for initial failure. Be sure to understand the contents of the Japanese manual before proceeding with the work. ********************************************************************************************** *****************************
■ If you would like to have a paid option below, please tell us from the trading navigation.① 516U Voice module regular price 19,800 yen ⇒Special price 12,800 yen* Viper genuine English/Spanish voice module
② Micro Wave Sensor Regular price 6,800 yen ⇒Special price 3,800 yen* Attached with a coupler ON, also known as: field sensor
③ Shock sensor regular price 3,800 yen ⇒Special price 1,800 yen* Can be installed with a coupler ON.
④ Led pilot lamp regular price 1,080 yen ⇒Special price 580 yen* Can be installed with a coupler ON.
⑤ LED scanner (blue) 7 consecutive regular price 5,800 yen ⇒ Special price 3,999 yen
Reference page:https://youtu.be/ketqa6uq6l4* Light emission pattern 10 x speed 2 stages can be prepared in white.
P.S, of course, with a Japanese language instruction manual, but please forgive only the claim for the instructions without purchasing a paid option.. |
|
|
