Please note that kind of kind

Sale of transparent protection seals for mobile phones described in the auction titleIt is not sold on the main unit. Only film type seal kits will be sold.
Easy and beautifully pasted
A method that is used by professionals without air bubbles and neatly paste and adjustable positioning method described in the pasting description (Successful bid email information at the time of shipment) The LCD surface/lens surface/front surface (depending on the model)
Transparent glossy self -absorption (this auction image ①②: The light blue/white part is self -absorbed and transparent glosstype)With a self -adsorbent film type transparent glossy seal touch panel compatible with a Film that has been developed exclusively for LCD surface High performance compared to silicon -based adhesions, such as adhesive strength after pasting the adhesive of 3 generations in silicon and 3 generations of rubber -based adhesiveDedicated cut for each model (UV reduction / material: PET thickness: Easy to handle and easy to stretch 80micron antibacterialOutdoor light resistance 5 years left)After peeling, remaining pears remain, re -paste OK, some scratches from the LCD surface are not noticeable after sticking film and improves clearness Seal kit content

If you bid on your PC/mobile deviceYahoo a successful bid email Please be able to receive Send from Yahoo after a successful bidHow to purchase in the exhibitioner message field during a successful bid emailAs we are informed
After confirming the contents, please let us know the necessary information, such as the total transfer amount of the payment destination from the transaction navigation system.
After a successful bid, you can purchase immediately after a successful bid without waiting for the exhibitor's transaction navigation, so during the successful bid email sent from Yahoo
We will inform you of the purchase method.
Contents to be notified
Please be sure to inform you of the shipping destination / remittance destination to us, including simple payments, your desired shipping fee + the total remittance amount.
We will not contact you until the time of shipping is confirmed, so please contact us in the transaction navigation system after payment processing.
If you do not contact us after 24 hours after a successful bid, you may contact us.Please let us know necessary items within 48 hours after a successful bidEven after 48 hours after a successful bid, we will cancel if you do not make a payment. In this case, the evaluation of very worse than Yahoo will be evaluated.

Easy settlement ・ Japan Net, Ebank, Pururu, Mitsubishi UFJ Successful bid mail is currently not sent Payment after a successful bidWithin 48 hours to remove financial institutionsThis auction will be re -listed, so please do not hurry to make a successful bid In the case of mail service shipping request Kuroneko Yamato Male flight only(You can follow the same post after posting the same as ordinary mail) 80 yen+ Amountped bid amount
Please let us know in the transaction navigation after remittance processingFree shipping on many sets (Shipping by ordinary mail is not allowed) Simple packaging with ordinary envelopes (packaging complaint is not allowed
When sending 80 yen (speed 180 yen), there is no guarantee that it has disappeared somewhere, including damage and non -arrival (Yamato content)
If you bend, it seems that many will be posted on the post, so please put it in the post in the postThe shipment number is not announcedSince the number of shipments is large, we will not inform you of the shipping number by mistake, so we will not inform you of the shipping number at the time of shipping.
If you do not reach, please contact us within one week after shipping, we will notify you of the shipping number, so please put it directly to the sales office.
If you have a request, we will contact Yamato to the Yamato. Our original → Yamato mail service 200 yen (speed 250 yen) for a guarantee request (Unknown whereabouts are sent out by Yamato Mail service for free after confirmation)

Normal mail service is about 4 days in the middle of 4 days (for detailsOn Yamato's websitePlease check from Chiba What is the difference in the seal set that arrived?Please check the contents as soon as you arrive, so there are many models, so you may send it by mistake.
If there is a different cut shape model, if there is a missing item, it will be a shortage, but please let us know specifically. We will respond flexibly.
Example of description: 1 LCD surface, LCD size different shape, etc.
If you deliver it in a way other than handing, it will be eligible for cooling -off.
Within 8 days after shippingProduct unopenedIf so, it can be returned (if the product is opened, it will not be returned)
Auctions will be canceled with a cost of shipping and transfer fees other than the successful bid amount.
Management of personal information
Do not use only the necessary information for the auction you purchase
Paste in the shipping email Please check the description of the HP and paste it well.Film/seals should be pasted at your own risk, you can't stick it well.
If you can't put it well, the evaluation will be worse than us if it is written from the evaluation field suddenly.
If you are too clumsy, you may not be able to put it well. Those who can put a normal seal in a fixed place about plastic model decals.
If you don't know anyway when paste, please TEL Weekdays AM10 to 3:00 pm.
We will respond to requests/proposals as much as possible.
There are many cases where people who are suddenly pasted without reading the paste instructions sent.
The trick to put on the best is the most difficult to stick without dust in the transparent.

Those who are nervous, finer, those who are logical, those who can evaluate that they are bad without being able to stick well/If you are required to evaluate (see evaluation methods), etc., you will not be able to bid. Welcome to good people ... Many people who can contact us after a successful bid will be limited to the ordinary.

Transparent protective film developed exclusively for liquid crystal surfacesIs not a silicon -based film sold elsewhere From silicon -based adhesive use filmExcellent third -generation self -absorption type filmusing Film thicknessI cut the most easy -to -tension film that we tested (too thick or too thin can not be stretched) Film cut shapeCut in some under size so that it matches the shape of the flat part of the liquid crystal display panel so that it can be easily stretched
(Those who want severe sizes such as 1/10mm units cannot be bid/liquid crystal protection film will not be good if cut in full size) Anyone can put it ...? ?The pasting explanation will be sent by e -mail at the time of the shipment of the shipping ・ No explanation by linking the image paste explanation Protected film is consumableIf you use it, the seal surface will have fine scratches, so usually one is not enough.
Also, even if the clear panel has already been scratched, the wound will disappear by putting this sticker (it depends on the degree of scratches). CautionThere is a place to change the seal shape without notice because of the improvement Since it is cut with a machine, if the back on the cut line around the film is dark, the cut line may be noticeable(When the adhesive layer on the cut line is pushed by the talent to cut, it may look different from the other part when viewed from the diagonal)
If you are worried, the improvement method is described during the description of the shipping email pasting
If you put it on a bright color, it is hardly known (the film cut with a machine is the same, not limited to this film).
Self -adsorbed type films such as this film and silicon filmIt will peel off if the power to peel off more than the adsorption force is appliedIf you hook and peel it off in the back/pocket, etc., store it on the palm side of the film face.
It is not a silicon -based adhesive that sells by the third -generation self -absorbent use.
The use of films made by major manufacturers developed exclusively for the liquid crystal surface (Hardcoat layer type and touch pen and support, so the response of the touch pen is quick. Characteristic Unlike the silicon -based adhesive that is sold/commercially sold, it has a high transparency and has a weak adhesive power and becomes the maximum adhesion about 3 days after pasting.
Use of self -absorbent material>After pasting, the adsorption power will be stronger than a recon -based adsorption material.
(Silicon system is the maximum adhesive force when pasting, so it is harder to paste when paste). Transparent glossy/matte body protection stickerIn self -adsorption, it can be peeled off that can be attached to this sticker, such as a lot of curved surfaces or decken electricityIn addition to the carbon pattern, wood grain pattern, mosaic pattern color, leather pattern, there are various things.
There are many types of color types and there are many types of colors, so we use normal glue stickers that do not peel off. Washing: You can wash with any type of film, including silicone films.
Washing, dry, drying a small dust, so please use it as soon as you peel it off the mount.
The film itself can be reused, but it usually comes with dust, so usuallyDo not reuseThe seal surface can usually be eradicated naturally under the photovoltaicBacteria cannot be dismissed by antibacterialIf you are used in a place where solar rays do not hit or want to remove bacteria, it is sold in Elliere about 280 yen.
Ekisiac spray: Normally, over -the -counter products about 600 yen
Both should be used after paste the film
Antibacterial can stop the growth of the attached bacteria, but cannot be disinfected with the attached bacteria.
Since the LCD panel has a long life, there is no need for UV rays (UV) measures (backlights gradually become darker due to their lifespan.

Made of seats, seals, and films, such as the LCD surface/transparent body protection, transparent leather, color, and type, with a cutting machine instead of a mold
We first sell and exhibit systems that can support a small amount of models ((note the kind of product))
Recently, good machine good software can be purchased at low cost. Anyone can easily make it for the same mechanical and accurate cutline.
It can be done, but an analog cut shape is required to make it easier to paste into a solid shape.
If you work on a cutering seal and make a 35 -year -old protection sticker, please purchase a favorite person.
The machine is cut with a professional cutting machine, so the curve comes out beautifully.
Occasionally, if you are in a bad mood, the spare machine will be active in that case
The person himselfProduction of single product of original modelAn interesting thing
I'm working hard day and night with a few brain miso?・ ・ ・ I can't do something that I like
You can resell the seals you purchased freely.
A copy of our image/explanation is not possible
I don't want to make it detailed because the contents of the full text are troublesome, but recently there are many unclear successful bids, so I am listening to the ordinary things.
Since it is supported so that you can purchase it easily, please refrain from document contents such as the contents of the information pointed out in the imagination of contacting us.
Please let me know only the reality Example: The luggage does not reach, but it seems that this part does not seem to enter.