■ Set construction contents
① We will clean the body paint surface, metal parts, nut grooves, and frets neatly. (Cleaning fee comic)
The body paint surface is used with a special agent and carefully polished it by hand.. I don't use hand polisher because there is a possibility of scratches. The original shine is revived. (In the case of matte finish and oil finish, no luster is performed)
Metal parts use dedicated rust and cloudy agents to polish them carefully by hand.. Polish to every corner of small screws. There are rust and cloudiness that cannot be dropped, so thank you for your continued support.. Cleanly remove dirt such as pickguards, plastic pickup cover, plastic knob, etc.. The discoloration due to sunburn cannot be removed, so thank you for your cooperation.. Remove the dirt attached to the nut groove neatly. Dirt in the nut groove can cause tuning to go crazy. Also, sustain will also get worse. The fret is masked firmly so that the fingerboard does not damage, and use a dedicated drug to polish it by hand.. Rust and dirt on frets affect the finger ring. Also, sustain will also get worse. Remove the dust around the pickup and the bridge.. Dust not only looks bad but also causes rust.. ② We will cross the frets. (Ringed frets)
The fret edge is processed round. Also, polish the fret to a state close to the mirror surface.. We will improve the chat and sound clogged by rehabilitation of the fret strings.. Fingering will be smooth by performing fret arrangement. Also, sustain is greatly improved.. After the fret, adjust the height of the nut groove to the optimal state.. If there are few frets, the play -and -play may change, so thank you for your cooperation.. ③ We will make the fingerboard in a beautiful optimal state. (Cleaning fee comic)
The fingerboard uses a special agent to remove dirt and wipe it with a special oil.. The dirt on the fingerboard not only looks bad, but also makes it harder to cheer.. ④ Maintenance of jacks, pot switches, etc.. (Maintenance fee comic)
Inspection and sweeping to revive the contacts. Inspection and cleaning and not revived, we will quote and consult with parts replacement.. Parts costs and exchange fees will be charged separately, so thank you for your continued support.. ⑤ I will replace it with a new string. (String exchange fee Komi)
We will deliver a new string of Ariapro II/GAUGE (009-042/009-046/010-046) immediately.. If not specified, we will replace it to Ariapro II/Gauge 009-046.. If you have a manufacturer or gauge request, you can order it.. In that case, it will be a separate fee, so thank you for your cooperation.. If you can enclose your favorite strings, you can replace them.. ⑥ We will tighten octave adjustment, tremolo floating adjustment, screws, etc.. (Adjustment fee Komi)
Adjust the octipic. If the octa Bitch does not fit, the pitch of the high position will go crazy.. In the case of an electric guitar with tremolo, adjust the floating adjustment. If it is not the right floating state, it will be difficult to arm, but you will lose your original sustain.. We will tighten the screws in each place. Loose screws may cause parts wear or chatter.. ⑦ We will adjust the neck straight. (Adjustment fee Komi)
Adjust the truss rod and adjust the neck straight. We will adjust straight with strings and tuning together.. The neck warpage is not only difficult to play, but also causes chatter and clogged sound.. It may not be straight depending on the neck condition, so thank you for your continued support.. (When the neck and waves are terrible)
⑧ We will adjust the string height low! (Adjustment fee Komi)
We will adjust the string height lower according to your preference. It can be adjusted to about 1.5mm for 6 string 12F, about 1.0mm for 12F 1 string.. Please note that it may not be possible to lower it so far depending on the neck condition.. (When the neck and waves are terrible)
If you do not have any particular request, we will adjust it to about 1.5 to 1.8mm for 2.0 to 2.3 mm and 12F 1 string for 6th string 12F.. ● Beautiful, easy to play and set up to the best sound quality!
● Please note that the construction target will be 6 -string electric guitar.. The construction of a multi -string guitar is also possible, so please contact us for the price.. ★ Acoustic guitar repair is possible at the same price, so please tell us!
Skilled Prolly Pairman carefully finishes with all your heart!
Please use it with confidence.. ■ Optional
・ Parts replacement (metal parts, circuit parts, pickups, etc.) 2,000 yen ~ (parts fee)
It is okay to enclose the parts. In that case, only the exchange fee will be. ・ Wiring reduction 2,000 yen ~ (by part)
We will replace the aging wiring with new wiring.. The sound quality will be improved by replacing the wiring.. Customization of pickup wiring is also possible. ・ Body scratch removal from 4,000 yen
We will inconspicuously noticeable rubbing scratches.. ・ Painting partial repair 5,000 yen ~
We will make the paint peeling off inconspicuous.. ・ Noise reduction processing (shielded in cavity) 5,000 yen ~
Pickup Cavity, Control Cavity, etc. Conductive painting and drop the ground wiring.. It is the most effective noise reduction process. ・ Nut replacement: 5,500 yen (by part)
Can be exchanged for bleached beef bone nuts, non -bleached beef bone nuts, pickled beef bone nuts, derlin nuts, carbon nuts, brass nuts, etc.. If you wish to replace it with a roller nut, it will be an estimate after confirming the actual item, so thank you.. ・ Fret exchange: Fret exchange & cleaning & repair set! Is a great deal. Please see the auction booth for details. ↓ ↓Auction booth* Regarding painting refinish, only crushed color, see -through, oil finish (poly and lacquer) can be supported at present.. Samburst etc. will be supported in the future, so please wait a little longer.. If you have any other requests, please feel free to ask a question.. ■ Transaction flow
1. Please settle the successful bid price of 9,990 yen within 48 hours after a successful bid (excluding Saturdays, Sundays, and public holidays).. (There is no consumption tax)If you would like an option, we will send you an electric guitar and we will give you an estimate and consultation after arrival, so if you like, please transfer to PayPay Bank (the account will be contacted after the quote).. Please bear the transfer fee. 2. Please put an electric guitar to us by putting it in a hard case or cardboard, etc.. (Please pay the original payment. Please pay the shipping fee at the customer.. The shipping company is okay anywhere)
3. After arriving at the electric guitar, the construction will usually take about one week in the case of basic construction.. The work period may fluctuate depending on the congestion status and the difficulty of the work (such as if you want an option), so if you are in a hurry, please contact us in advance.. In addition, if it is very crowded, we may make a reservation system, so thank you for your cooperation.. 4. After construction, we will send an electric guitar to the customer.. Packing is in principle, the customer is packed and sent.. (If the return fee is 160 size or less, we will bear the burden.) * For items exceeding 160, we will pay for Yamato Takkyubin (customer burden), so thank you for your understanding.. |
| ■ Bid will be limited to those who can contact us by trading navigation within 48 hours after a successful bid.. ■ If there is no contact in the transaction navigation within 48 hours after a successful bid, please note that we may delete it for your convenience.. In that case, please note that the Yahoo side will be evaluated as "very bad".. ■ Recently, malicious bids are increasing, so please understand that we will take such measures.. |
|
| · Yahoo! か ん た ん settlement of accounts |
・ Yamato Transport Takkyubin
* It will be shipped only in Japan. * Cash on delivery is not possible. ● Bring directly to our shop is also welcome.. If you would like to bring in, please contact us from our website.. → https://g-kaze.jp/ |
|
