Highly sensitive, high-performance temperature controller. This kind of product will break when the home power supply (100V) is connected to the device. Be sure to convert to 12DC before using. The ON/OFF switching part can be used with a home power supply (100v) or 12dc. Even if you buy from someone who does not write this well, you will have a hard time until completion. About shipping
Non-standard 200 yen
Letter Pack Plus ¥510
If it is enclosed with other products, it may be free shipping or cheaper. Please contact us if you want to purchase multiple or enclose multiple items. If you also want a 12DC power supply
At Yahoo Oku Thermostat with power supply
Please search for. (Currently out of stock,)
This power supply is an energy-saving power source with a monthly electricity bill of about 32 yen even if it is left on for 24 hours a month when calculated by an electricity bill simulator. Even if you use it, it is very convenient because it is very difficult to hold heat, so there is little loss. Some people buy two power supplies together. There is also a high-sensitivity temperature and hygrometer that is convenient to have as a set. Why don't you join us?. Please search for "quail temperature hygrometer" on Yahoo!. Self-made incubators, self-made incubators, greenhouses, warehouses, cold and warm warehouses, ventilation, etc.. Recommended for chickens, quails, insects and reptiles. It is very useful to have it in the coming period. feature
You can see the current temperature at a glance. Wide range of temperatures. Various settings and detailed settings can be made.. This is the temperature control device I use when I hatch and raise quails. New article unused. Making your own incubator through trial and error and hatching chicks is a different kind of fun and accomplishment than hatching with a commercially available fully automatic incubator. The incubator specializes only in incubation, but if you use it, it can be used not only for incubation, but also for temperature control in all kinds of spaces, such as raising chicks, temperature control in winter, room temperature control, insect rearing, etc. Temperature control is very important for 2~3 weeks after the chicks are born. If you fail, you will let the chicks die. It can be used in a wide range of temperatures from -50 ~ 110 degrees Celsius, so it can be used in various situations. The incubator is quite expensive, but I think this control device that can be used in a wide variety of ways is a good deal. Excluding heat insulation equipment, cooling equipment, and power supply, you can create your own incubator or self-made chick breeder for about 1,000 yen plus. merit
You can make a variety of things cheaply.
Can be used in a variety of situations
By reducing unnecessary heat retention, you can save on electricity bills and increase the life of insulated bulbs.
Reduces the chance of the temperature rising too high or falling too low to kill. demerit
You need to get some things at a home improvement store.. See below for items to be prepared. There is a slight temperature error, but I think it can be used without problems. * There is no package, box, or product manual.. After purchase, when the product arrives in your hand, we will tell you how to use it with photos etc.. If you want to know, please ask. This device is the device that controls the heat preservation device. * Thermal bulbs, fans, fans, cooling devices, wiring, power supplies, etc. are required separately. Creation example
I will briefly explain what you will need when hatching and raising chicks. (This machine sold only has a temperature control function, and it does not have a heat retention function or a cooling function, so it needs to be purchased separately.)
・ It is OK to connect to a heat insulating light bulb (heat insulation device), fan or cooling device, cold and heater, or incubator. ・Wiring
・ Outlet (about 100 yen at a home center)
・ The part where the insulated bulb is inserted (about 150 yen at the home center) (If you have a thermal bulb with a cover, you must buy an outlet for the recipient at the home center)
・ 12dv / AC100V power supply (about 500 yen used for hardware ○ f). If you plug it directly into an outlet, it will break. I will tell you what kind of things I recommend with photos after purchase. )
If you connect the above to this device and surround it with styrofoam or cardboard, you will almost complete your own incubator. After that, please fine-tune and devise as you like. * The instrument in the middle of the second photo and the temperature sensing part attached to the upper right are the ones sold this time. The wiring visible at the bottom is not sold. Usage examples
Warming scene
* When the temperature drops below 38 degrees, the switch is turned on and the temperature is raised with a light bulb, and when it reaches 38.1 degrees, the switch is turned off.. Repeat
* When the temperature drops below 26 degrees, the switch is turned on and the temperature is raised with a light bulb, and when it reaches 30 degrees, the switch is turned off.. Repeat
* When the temperature drops below 37.8 degrees, the switch is turned on and the temperature is raised by the heat insulation device, and when it reaches 38 degrees, the switch is turned off.. Repeat
Cooling scene
* When the temperature rises above 38 degrees, the switch is turned on and the temperature is lowered by a cooling device such as a fan, and when it reaches 37.8 degrees, the switch is turned off.. Repeat
I think you can easily fine-tune and do the above operations. Accessories: Temperature sensor about 31cm
A small screwdriver is required to install the wiring. If you would like a set of 6 new small screwdrivers for precision machinery, we will enclose it for 250 yen. If enclosed, the shipping cost will be charged to the service. If the driver is a single item, a separate shipping fee is required.. Out-of-line shipping will be without tracking or warranty. I can't take responsibility for postal accidents, loss, or damage, if you are interested, I will change it to something with warranty tracking such as Yu-pack, letter pack, etc., so please comment. * Please pay close attention when working.. * Please connect so as not to make a mistake with +-.. * We may not be able to answer technical questions related to electrical engineering.. We will answer the basic operation. * Please adjust and check the temperature many times before putting living things or objects in the completed equipment using this equipment. * Electrical engineering license required
Please bid only if you can contact and pay quickly after winning the bid. If you don't hear from us for more than one day, you're quite worried, so we'll delete it for the convenience of the successful bidder. If you are a newcomer, please let us know your intention to purchase from the question column before bidding. If not, the bid may be canceled. If you are a new person, please contact us within 3 hours if you have won the bid. If there is no contact, it will be deleted at the convenience of the successful bidder. * After winning the bid, there are many people who do not communicate with each other, so it is like this. In the case of payment by easy payment, it will be shipped after payment is confirmed. * There is a high possibility that it will take 2~5 days to confirm the payment of easy settlement. If you are in a hurry, please transfer to Japan Post or Sumitomo Mitsui Banking Corporation. There is no transfer fee between Japan Post and Japan Post. On Saturdays, it is difficult to get in touch with questions and transactions. We can't ship on Saturdays and Sundays. * Initial defects within 2 days of arrival will be returned and exchanged, but we will not be able to respond after that.. Still, only the good one. I need your help by a no claim no return.

Time	User	Price
No bids