Snare 14 x about 6.5 inches made by remodeling Kenya's traditional drums! /Naka Goku production
| Auction ends | over |
| Bids | no |
| Current price | ¥198,000 $1,360 |
| Start price | ¥198,000 $1,360 |
| Consumption tax | 0% included |
| Seller | nonakagoku +471 |
| Condition | Used |
| Start time | 2024-03-27T22:06:47+09:00 |
| End time | 2024-04-03T22:06:47+09:00 |
| Auto-prolongation | Turned on |
| Lot number | f370846976 |
| Seller position | Saitama |
■ Self -introduction
Produced "Nanaka Goku", an active player of TAMA's 45 years* "Uganda Drum Trip" serialized in "Rhythm & Drum Magazine" in the past■ Product Description
★ I use it occasionally. ★ Sonar and Gretsch sound, but this isThe solid feeling and presence that can only be given to this.
* Kenya's horny super -deep zenare.Weight, about 7kg. heavy!* The drums used for traditional music in the village of Kenya. The skin was peeled on the cow, but removed it and divided the long -sapped round top up and down.. I made a snare in the lower half (the upper half made the bathtum being exhibited). It wasn't 14 inches accurately, so I used an ax. * It is unknown whether it has been used for decades for several years at a local festival. I think it's a pretty old log.
* There is no crack.
* Hashing surface = not a true yen 14 inches.
In the production process, the new TAMA normal 10 holes were made, but the used pearl used thick, heavy rim. 10 holes. There are many Pitts. No problem with the tone.You can buy rims if you give money, but this hanging snare does not replace even if you pay for it..
* Rim on the back side = In the production process, the new TAMA new normal 10 holes were added, but changed to 10 holes with a pearl bridge.. There are many pitts.
* The ship shape is a new TAMA (it is dirty because it has been replaced many times)A few buzz drum boats are also attached. Therefore, the position with a hole will be slightly higher.. For this reason, the body is cut about 10-15mm and dented..
*thereforeTuning is extremely difficultis.
* Depth = There is no standard product, so the size is about 6.5 inches.
* It is not a true circle ⇒ It is difficult to attach and tuning the head without proficient.. * Funa, Tam holders, rims, and snappies use new TAMA Star Classic.. But it became dirty while remodeling many times. * As for the edge inside the main unit (to prevent cracking), the transparent adhesive is applied and colored varnish is applied from above..
* The thickness of the body is not uniform. I have never measured it, but it is less than 20 mm in a thin place, about 30 mm in thick places.. * I painted the painting that was originally painted. I paint various varnishes and paint more. * The head is used properly from the stock. * It's a lifetime mon.
* During the production process on site, it was made with only saws and axes without using any rules, power tools, etc.. I returned home and used tools normally. Dimensions are about different from mass -produced. * African feeling, continental feeling, wild flavor, such a taste, it is a super -dedicated and deep body snare. * The metal belt wrapped around the body is not because it is broken, but is wrapped to prevent cracking (may be removed)..
*The tone changes throughout the type of head and tuningSo, attach various heads and try tuning in various ways. It will make a wonderful sound that you have never heard before.
*Sometimes I try out live or outdoors* Three new boats of TAMA Star Classic Tam Holder are attached so that they can be used in bathtum or toms.. * The screws are probably new of TAMA. I forgot because I removed it many times w
* The real thing is slightly different from the photo.
* The real thing is slightly different from the photo.
* I use it occasionally.■ ShipmentPay our burden by Yamato Transport courier service.
■ OtherThe clinque tam made in UgandaFrom 11 to 18 inchesThere are about 10 piecesIt is different from ready -made products that are expensive but mass -produced.
★ The 16 -inch bathtum of the upper half of this log is also exhibited.. The upper surface is 16 inches and the lower surface is 15 inches. Originally, it was used for the festival with a cow skin on a large tree that had a reverse stand -shaped log.. Both are very heavy.
★ I have 3 new TAMA Tam holders. Therefore it can be used as a tom. Also, if you attach three legs, you can use it like a floor tam..
To be clear, the sonar sounds better. Even with the same inner diameter of 14 inches, this "Kenya Kuri -pulling" is too thick (average 2-3cm), so the actual volume is about 13 inches.. Moreover, it would be a big job if the torso was resonated with vibration..
* If the sound of the sonar is "Baba, Mama ♪", the Kenya is like "Oops, oh ♪" w. Tone of warm ethnic instruments.
■ Note ①★ metal fittingsThe mounting position was made by roughly measurement, so it apartis. So the screw length is the tension key? The length is also different. Therefore, when removing the head or rim for the replacement, please make a note of which ship mold removed and then disassemble.. In a way, it's a cute cute guy (laughs).(Added in September 2021)★ Because the thickness is too thick, the part that is too thick is shaved with fleas, kitchen knives, sculptures, etc.. Later, apply varnish to that part. The thickness was about 30mm and about 20mm.★ After the internal shaving is completed, the adhesive to prevent cracking is applied, and the transparent varnish is applied from above..
★ For 100 % handmade, the inside and the outside are not round.. ★ To prevent cracking, to prevent cracking, we used bracket used for tightening pipes and other places to tighten up and down.. In the past, it looks like a tub tag. This is safe with this.■ Note ②
*In any case, we will not respond to returned goods or refunds. Bid carefully. *Those who have multiple cancellation history or have poor evaluation may be deleted even if they bid.. *If you do not make a payment procedure within 72 hours after a successful bid, we will delete it.
| Time | User | Price |
| No bids | ||
No questions.
