Black Aluminum Shan shade K6-016-C-F3 Compatible models

Car model	Model	Model year
Mitsubishi Outlander PHEV	GG2W GG3W	H29.02 ~ R3.12
-

Black Aluminum Snhade K6-016-C-F3

Product Description	An improved version of Aluminum Sanshade is new! Black aluminum is adopted on the surface to significantly improve shading. The cotton eye of the insulation material is 1.5 times * 1 90g/m2, and the insulation effect has been improved.. Furthermore, by adopting a sucker with a ring for the sucker, you can use it safely and with peace of mind. The quilt processing is the first in the industry * 2 Ultrasonic quilt processing is adopted, and the design and strength are improved. It is a type of shade to put on the window glass of the car. Because it is designed for a complete model, it has excellent shading properties, and has excellent lighting, nap in parking, hiding loading, and crime prevention effects. In the summer, the reflection of black aluminum can be expected to have an insulation effect. Furthermore, the special structure fabric contains enough cotton, so the heat retention effect can be obtained in winter. This product can be used for multiple purposes all year round.
Exclusive design	A skilled craftsman will produce one by one according to the window of the car. In addition, the position and number of the sucker are considered depending on the mounting site, and it is possible to attach it firmly on a large surface such as windshields and rear glass. * This product is intentionally made slightly larger than the window so that the light -shielding and heat -insulation effects are maximized. Even if you have no settings !! Please be assured that you have no settings for your model shade! Even if you have no settings, you can make it if you prepare a "pattern" using newspaper etc. for you! If you wish, please let us know with the manufacturer..
Notes	● Please understand that it is "installed on a sucker" before purchasing. This product adopts the highest quality suction cup based on domestic injection.. The main installation is installed using the sucker. We are proud of the highest quality, but due to the nature of the sucker, the adsorption power will decrease from the moment you put it. Therefore, even if you want to be stuck for a long time, please re -past it every time. Also, if you put it for a long time, the sucker will be deformed. In that case. Store in a warm place until the shape of the sucker returns. Also, if you avoid moisture and ultraviolet rays, the sucker lasts a long time and you can use it for a long time. ● How to wear the windshield shade In the past, a method of attaching it with a sucker at the top of the shade was also adopted, but the standard equipment of the navigation system increased, the number of vehicles with film antenna was affixed, and even if the sucker was attached to the antenna wire, it was caused by unevenness. It is also assumed that air will enter into the sucker, the adsorption power will weaken, and that it will come off, and that the antenna itself will come off, so we lower the top of the sucker position at the top to the point where it does not interfere with the antenna. The mounting to the top is supported by inserting a plate into the gap between the glass and the lining.. By changing this specifications, you can avoid interference with the film antenna. However, the mounting position of the antenna is different for the mounting shop and the dealer, so there is a risk that plate insertion will interfere with the antenna base. In that case, it is necessary to drop the sun visor so that the shade does not fall. We would like to ask the dealers to encourage customers to be careful about how to install them. In addition, there may be no gaps depending on the vehicle, so such vehicles have the same specifications as before. ● Regarding the antenna line in the rear quarter There are no roof antennas or rod antennas, such as minivans, and there are many things that are built into the rear quarter like a heat ray. Even if a sucker is attached on the antenna wire, air will enter into the sucker due to unevenness and the adsorption power will be weak and will come off immediately. Therefore, it comes with both a small sucker and a normal size sucker as an accessory, so please use a small sucker in a place where you can escape. Normally, use if the sucker is deformed in the unlikely event that it is delivered. In addition, the problem has been changed sequentially from what has been confirmed by the current car.

Business date and time
Weekdays from 10:00 to 17:00, 1st and 3rd Saturdays from 10:00 to 12:00
2nd and 4th Saturdays, Sundays and holidays are closed days. Regarding delivery
It will be shipped on the day only (the next business day if the holidays are closed) only if there is stock by confirming payment until 15:00. Some manufacturers directly shipped, non -stock, etc. If you are in a hurry, please be sure to contact us about the stock status before a successful bid.. In addition, since it will be sold together with other malls, it may be out of stock depending on the timing of your order. For shipping charges
For shipping costs, please refer to the in -cart display amount except for remote islands. Free shipping except for some products, Hokkaido, Okinawa and remote islands require extra shipping. In the case of a remote island, the shipping fee varies depending on the destination, so please be sure to contact us with the postal code to the destination from the question before the successful bid. After investigation, we will answer. If you do not have any questions in advance, we will confirm after a successful bid and perform the additional processing. About contact
All contacts from us are made by email. Please make sure to make a successful bid after setting the email address that you can get in contact with.

Time	User	Price
No bids