EarthQuaker Devices Earth Quest Car Device EQD LEDGES Riverb Guitar Effector
Auction ends | 24 hours |
Bids | no |
Current price | ¥33,000 $227 |
Start price | ¥33,000 $227 |
Buy-now | ¥33,000 $227 |
Consumption tax | 10% not included |
Seller | chuya4711 +97573 |
Condition | New |
Start time | 2024-04-25T18:04:30+09:00 |
End time | 2024-05-02T18:04:30+09:00 |
Auto-prolongation | Turned off |
Lot number | g1114974820 |
Seller position | Fukuoka Prefecture |
EarthQuaker Devices Earth Quest Car Device EQD LEDGES Riverb Guitar Effector
LEDGES is a reverb with 3 mode and can save six presets. Each parameter can be operated from the outside with an Expression pedal and can be used in various situations.. Of course, those who want a reverb that has been familiar for a long time. If you are not satisfied with the reverb so far, you will be able to create an original space with this reverb.. We will respond to the request for your reverb from a variety of angles by combining with preset.. ● Mode R: Room Reverb
The room mode is the most long box sound mode of reverberation.. Every time you raise the knob, the boxing feeling increases. LENGTH: Adjustment of reverb length. This mode is the reverb with the smallest box sound on the pedal. Damping: Adjustment of the high range of reverb components. Mix: Adjust the amount of reverb mixed with the original sound. ● Mode C: Hall Reverb
In the hall mode, every time you raise LENGTH, the sound of the church is added, and a box noise is created complicatedly reflected and a sense of distance.. LENGTH: Adjustment of reverb length. From a hole reverb to a reverb like a cathedral. Damping: Adjustment of the high range of reverb components. Mix: Adjust the amount of reverb mixed with the original sound. ● Mode P: Plate Reverb
In the plate mode, the reverberation of the reverberation of the reverberation sounds around the plate mode.. LENGTH: Adjustment of reverb length. From the plate reverb of the recording studio to the reverberation reverb that lasts almost eternal. Damping: Adjustment of the high range of reverb components. Mix: Adjust the amount of reverb mixed with the original sound. Operating Modes
The Ledgs is equipped with two modes, so you can distinguish the mode with the color of the save/recall switch.. In Live mode, the sounds as set as each knob are output and does not affect the setting of the preserved preset.. Save/recall switch lights with green. In Preset mode, you can use the ledships with the settings saved in Preset.. Save from Preset knob to select a tone, and when using this mode, the knob settings are ignored.. Save/recall switch lights in red. Presets
The Legs is equipped with six presett that can save your favorite settings.. You can save and call on the settings, modes, and the assigned experience pedal settings to your desired number.. In addition, a specific preset is not saved at the time of leaving.. Expression Control
You can operate LENGTH, MIX, and Damping from the outside using a TRS specification pedal! The assignment of the exhibition at the time of leaving Aurelius is set by Rate, but the following method can change the function to be assigned.. You can also enter Control Voltage and CV! CV range is from 0 to 0.3V. Flexi switching
This product has a Flexi-Switch function.. It is an electronic relay type True bypass, and can be used as a normal latch -type switch (unlatch type) as a normal latch type switch (unlatch type) depending on the difference in how to step.. ・ In the case of use as a latch method, step on it once when you want to turn it on like a normal effector switch, and then step on the switch once again when you want to turn it off.. ・ In the case of use as a mocentary switch, the effector is turned on only while stepping on the switch, and once the switch is released, it will be turned off.. The Ledgs uses a bufferard bypass, and the reverb reverberation will continue to be output even if the pedal is turned off.. If the power supply is not connected, the input signal will not be output.. power supply
This product can be used with a 2.1mm center negative adapter with a 9V adapter. We do not recommend it because noise may be used when using a power adapter that is not a daisy chain or a non -transformer system. Also, do not use a power supply exceeding 9V as it may cause a failure!
Dimensions: 121 x 64 x 57 (mm)
Current current consumption: 80 ma
Input impedance: 1 Mohm
Output impedance: 100 ohm
TRS EXPRESSION PEDAL Wiring:
Tip: Wiper
Ring:+3.3V
Sleeve: Ground
We keep stock products in the Kanto warehouse in addition to the headquarters warehouse (Kitakyushu, Fukuoka). Even if the dispatcher is in Fukuoka Prefecture, depending on the ordered product, if it will be shipped from the Kanto warehouse or order a multiple items, it will be shipped from multiple warehouses and delivered in multiple mouths. There may be. Please note.
LEDGES is a reverb with 3 mode and can save six presets. Each parameter can be operated from the outside with an Expression pedal and can be used in various situations.. Of course, those who want a reverb that has been familiar for a long time. If you are not satisfied with the reverb so far, you will be able to create an original space with this reverb.. We will respond to the request for your reverb from a variety of angles by combining with preset.. ● Mode R: Room Reverb
The room mode is the most long box sound mode of reverberation.. Every time you raise the knob, the boxing feeling increases. LENGTH: Adjustment of reverb length. This mode is the reverb with the smallest box sound on the pedal. Damping: Adjustment of the high range of reverb components. Mix: Adjust the amount of reverb mixed with the original sound. ● Mode C: Hall Reverb
In the hall mode, every time you raise LENGTH, the sound of the church is added, and a box noise is created complicatedly reflected and a sense of distance.. LENGTH: Adjustment of reverb length. From a hole reverb to a reverb like a cathedral. Damping: Adjustment of the high range of reverb components. Mix: Adjust the amount of reverb mixed with the original sound. ● Mode P: Plate Reverb
In the plate mode, the reverberation of the reverberation of the reverberation sounds around the plate mode.. LENGTH: Adjustment of reverb length. From the plate reverb of the recording studio to the reverberation reverb that lasts almost eternal. Damping: Adjustment of the high range of reverb components. Mix: Adjust the amount of reverb mixed with the original sound. Operating Modes
The Ledgs is equipped with two modes, so you can distinguish the mode with the color of the save/recall switch.. In Live mode, the sounds as set as each knob are output and does not affect the setting of the preserved preset.. Save/recall switch lights with green. In Preset mode, you can use the ledships with the settings saved in Preset.. Save from Preset knob to select a tone, and when using this mode, the knob settings are ignored.. Save/recall switch lights in red. Presets
The Legs is equipped with six presett that can save your favorite settings.. You can save and call on the settings, modes, and the assigned experience pedal settings to your desired number.. In addition, a specific preset is not saved at the time of leaving.. Expression Control
You can operate LENGTH, MIX, and Damping from the outside using a TRS specification pedal! The assignment of the exhibition at the time of leaving Aurelius is set by Rate, but the following method can change the function to be assigned.. You can also enter Control Voltage and CV! CV range is from 0 to 0.3V. Flexi switching
This product has a Flexi-Switch function.. It is an electronic relay type True bypass, and can be used as a normal latch -type switch (unlatch type) as a normal latch type switch (unlatch type) depending on the difference in how to step.. ・ In the case of use as a latch method, step on it once when you want to turn it on like a normal effector switch, and then step on the switch once again when you want to turn it off.. ・ In the case of use as a mocentary switch, the effector is turned on only while stepping on the switch, and once the switch is released, it will be turned off.. The Ledgs uses a bufferard bypass, and the reverb reverberation will continue to be output even if the pedal is turned off.. If the power supply is not connected, the input signal will not be output.. power supply
This product can be used with a 2.1mm center negative adapter with a 9V adapter. We do not recommend it because noise may be used when using a power adapter that is not a daisy chain or a non -transformer system. Also, do not use a power supply exceeding 9V as it may cause a failure!
Dimensions: 121 x 64 x 57 (mm)
Current current consumption: 80 ma
Input impedance: 1 Mohm
Output impedance: 100 ohm
TRS EXPRESSION PEDAL Wiring:
Tip: Wiper
Ring:+3.3V
Sleeve: Ground
We keep stock products in the Kanto warehouse in addition to the headquarters warehouse (Kitakyushu, Fukuoka). Even if the dispatcher is in Fukuoka Prefecture, depending on the ordered product, if it will be shipped from the Kanto warehouse or order a multiple items, it will be shipped from multiple warehouses and delivered in multiple mouths. There may be. Please note.
Time | User | Price |
No bids | ||