Heat gun 1600W Hot gun air volume 2 steps adjustment temperature adjustment with 18 level attachments
Auction ends | 5 hours |
Bids | no |
Current price | ¥5,500 $38 |
Start price | ¥5,500 $38 |
Buy-now | ¥5,500 $38 |
Consumption tax | 0% included |
Seller | jqjxd068 +4553 |
Quantity | 5 |
Condition | New |
Start time | 2024-04-25T09:02:17+09:00 |
End time | 2024-05-01T23:02:17+09:00 |
Auto-prolongation | Turned off |
Lot number | h1076794997 |
Seller position | Kumamoto Prefecture |
Compare with other stores! !
We purchased high -performance heatguns that are easy to be purchased from the mechanic's perspective!
[What is different? ? ]
Many inexpensive heatguns are 1200W for the actual output of 1500W and 1500W for 1800W display.. In addition, there are many products that do not adjust the amount of heat and to increase the temperature by tightening the rear cover.
It is difficult to use when you use it. With the output -spoofed heat gun, the finish after processing is never satisfactory! !
We are doing golf club craft as a mechanic for motorcycles and as a hobby.. In the motorcycle, it is for baking, removing the screws, and peeling off the stickers.
Golf Club Craft is used for melting epoxy and urethane bonds.. It is very good because the adjustment range is wide and it does not heat too much.. This heatgun is easier to handle than the price, so I think you can like it.. It is an industrial heat gun that can be used for various purposes
Be sure to reshaft (shaft replacement) of golf club
In addition, sheet metal work, processing of resin products, etc.
It is a tool with a very high usage rate in specialized fields.. Therefore, the genre can be set widely..Body specifications
Input voltage: AC100V (can also be used with general home power supply)
Output: 1600W
Case material: ABS
Output air: hot air
Adjustable temperature: 50-550 ℃
Adjustment function: 2 steps of air volume and 9 steps
Air volume: 1190-350L /min
Standard accessories: Honmaru nozzle
Weight: Approximately 840 grams
■ Product details
Baking paint, drying car putty
Dissolving epoxy adhesive material
Drying of paint -based foaming agents, bending of PVC pipes
PVC sheet thermoelectric dressing and heating processing
Hyobi and glue using hot sticks
Penchi, varnish, adhesive heating work, carpet, vinyl sheet, stickers, etc.
■ Please note
* There is no warranty.. * Packages and products may have fine scratches and uneven paint on imported products.. ■ Please purchase after understanding.
We purchased high -performance heatguns that are easy to be purchased from the mechanic's perspective!
[What is different? ? ]
Many inexpensive heatguns are 1200W for the actual output of 1500W and 1500W for 1800W display.. In addition, there are many products that do not adjust the amount of heat and to increase the temperature by tightening the rear cover.
It is difficult to use when you use it. With the output -spoofed heat gun, the finish after processing is never satisfactory! !
We are doing golf club craft as a mechanic for motorcycles and as a hobby.. In the motorcycle, it is for baking, removing the screws, and peeling off the stickers.
Golf Club Craft is used for melting epoxy and urethane bonds.. It is very good because the adjustment range is wide and it does not heat too much.. This heatgun is easier to handle than the price, so I think you can like it.. It is an industrial heat gun that can be used for various purposes
Be sure to reshaft (shaft replacement) of golf club
In addition, sheet metal work, processing of resin products, etc.
It is a tool with a very high usage rate in specialized fields.. Therefore, the genre can be set widely..Body specifications
Input voltage: AC100V (can also be used with general home power supply)
Output: 1600W
Case material: ABS
Output air: hot air
Adjustable temperature: 50-550 ℃
Adjustment function: 2 steps of air volume and 9 steps
Air volume: 1190-350L /min
Standard accessories: Honmaru nozzle
Weight: Approximately 840 grams
■ Product details
Baking paint, drying car putty
Dissolving epoxy adhesive material
Drying of paint -based foaming agents, bending of PVC pipes
PVC sheet thermoelectric dressing and heating processing
Hyobi and glue using hot sticks
Penchi, varnish, adhesive heating work, carpet, vinyl sheet, stickers, etc.
■ Please note
* There is no warranty.. * Packages and products may have fine scratches and uneven paint on imported products.. ■ Please purchase after understanding.
Time | User | Price |
No bids | ||