Industry No.1 Strongest plating mall polishing separately Dimension Cleaning Foreign car exclusive corrosion Relaxed easily easy work car wash goods maintenance 50 pieces set 50 pieces
| Auction ends | 5 days |
| Bids | no |
| Current price | ¥6,360 $45 |
| Start price | ¥6,360 $45 |
| Buy-now | ¥6,400 $45 |
| Consumption tax | 0% included |
| Seller | bxor4603 +160 |
| Condition | New |
| Start time | 2024-04-24T09:16:12+09:00 |
| End time | 2024-04-30T23:16:12+09:00 |
| Auto-prolongation | Turned off |
| Lot number | h548674149 |
| Seller position | Aichi-ken |
◆ Product introduction
It is an original polishing pad dedicated to plating mall. Mercedes -Benz, BMW, Volkswagen, European cars, etc. Ultraviolet rays, acidic rain, etc.. I tried a lot of mall polishing of other companies, but there were many voices such as dirt, the corrosion areas came out, and it would cost a lot of time and money with buffs.. So we made a product that anyone can easily and beautifully. It costs tens of thousands of yen if a trader is constructed, so it's a cheap and easy -to -construct product.. If it is a new replacement, it costs at least 150,000 yen including wages.. If it has never been constructed, 100%corrosion dirt will drop.. There are hundreds of units, but there are no malls that have not fallen.. It is a product with 50 polished pats, coating agents, masking tape, and rags.. The photo I actually worked on is posted. If there is a roof mall or back mall or a lot of corrosion, 50 pieces may be less.. In that case, I think it is better to choose this 100 sets.. ◆ How to use
1. Sure the dirt and dust of the plated notor before construction. 2. Crease the plated mall with masking tape. 3. Polish the plated mall while polishing the pad while applying water, depending on the degree of corrosion, polish it about 15 cm to 30 cm at a time.. * After rubbing once, make sure that the corrosion marks are left in dry state.. It's hard to understand if it's water, so wipe it with a towel.. Please rub it again because corrosion emerges. I succeeded because I got corrosion if it did not come out.. 4. If corrosion cannot be removed, repeat the process of 3. again.. If you use 3 or more places in the same place, you may get a base.. The base has the same corrosion marks. In that case, you will fail and you will need to replace a new one, so if you use 3 or more, please rub it carefully.. 5. When the polishing is over, wipe it with a towel to drain the coating agent on the rag and rub it to the plated mall to polish it.. The coating agent will be heated and glossy by rubbing strongly.. If you coat once a month, corrosion will be reduced.. 6. Remove all the masking tape and wipe it clean to finish the work.. * Please rub the silver side with the mall for this putt product.. Special solvent is sprayed and cut into easy -to -use sizes.. * It is a product that cleans it while draining it off.. * Malls that have been constructed once are likely to be unable to use this product.. Because it may be shaved with a buff.. If you have a lot of things, please feel free to ask a question before bidding.. Another product is also on display, so thank you.. ◆ Payment method
Yahoo! Easy settlement
Bank transfer
◆ How to ship
It is a courier compact. Shipping may be Monday the day after the payment date, or if you have a weekend.. Holidays may also be the next day. Basically, shipping is 1-2 days, but if production cannot keep up, we may wait a little, so we will contact you.. Please consider. ◆ Notes
If you have any questions, please be sure to ask a question before bidding.. Avoid working under the scorching sun. The mall that has been constructed once and has a base is NG.. New replacement is required. If you polish it with a pad, you will get a white sharpening juice. If it is gone, it will have no effect. I can't get any scratches. Pat is effective only for one side silver. There are changes in product colors, packages, containers, etc.. The pad of the usage can also be used to remove the muffler.. Please use the silver person.
It is an original polishing pad dedicated to plating mall. Mercedes -Benz, BMW, Volkswagen, European cars, etc. Ultraviolet rays, acidic rain, etc.. I tried a lot of mall polishing of other companies, but there were many voices such as dirt, the corrosion areas came out, and it would cost a lot of time and money with buffs.. So we made a product that anyone can easily and beautifully. It costs tens of thousands of yen if a trader is constructed, so it's a cheap and easy -to -construct product.. If it is a new replacement, it costs at least 150,000 yen including wages.. If it has never been constructed, 100%corrosion dirt will drop.. There are hundreds of units, but there are no malls that have not fallen.. It is a product with 50 polished pats, coating agents, masking tape, and rags.. The photo I actually worked on is posted. If there is a roof mall or back mall or a lot of corrosion, 50 pieces may be less.. In that case, I think it is better to choose this 100 sets.. ◆ How to use
1. Sure the dirt and dust of the plated notor before construction. 2. Crease the plated mall with masking tape. 3. Polish the plated mall while polishing the pad while applying water, depending on the degree of corrosion, polish it about 15 cm to 30 cm at a time.. * After rubbing once, make sure that the corrosion marks are left in dry state.. It's hard to understand if it's water, so wipe it with a towel.. Please rub it again because corrosion emerges. I succeeded because I got corrosion if it did not come out.. 4. If corrosion cannot be removed, repeat the process of 3. again.. If you use 3 or more places in the same place, you may get a base.. The base has the same corrosion marks. In that case, you will fail and you will need to replace a new one, so if you use 3 or more, please rub it carefully.. 5. When the polishing is over, wipe it with a towel to drain the coating agent on the rag and rub it to the plated mall to polish it.. The coating agent will be heated and glossy by rubbing strongly.. If you coat once a month, corrosion will be reduced.. 6. Remove all the masking tape and wipe it clean to finish the work.. * Please rub the silver side with the mall for this putt product.. Special solvent is sprayed and cut into easy -to -use sizes.. * It is a product that cleans it while draining it off.. * Malls that have been constructed once are likely to be unable to use this product.. Because it may be shaved with a buff.. If you have a lot of things, please feel free to ask a question before bidding.. Another product is also on display, so thank you.. ◆ Payment method
Yahoo! Easy settlement
Bank transfer
◆ How to ship
It is a courier compact. Shipping may be Monday the day after the payment date, or if you have a weekend.. Holidays may also be the next day. Basically, shipping is 1-2 days, but if production cannot keep up, we may wait a little, so we will contact you.. Please consider. ◆ Notes
If you have any questions, please be sure to ask a question before bidding.. Avoid working under the scorching sun. The mall that has been constructed once and has a base is NG.. New replacement is required. If you polish it with a pad, you will get a white sharpening juice. If it is gone, it will have no effect. I can't get any scratches. Pat is effective only for one side silver. There are changes in product colors, packages, containers, etc.. The pad of the usage can also be used to remove the muffler.. Please use the silver person.
| Time | User | Price |
| No bids | ||
