[Prompt decision] 40 metal pins + 8 spinstart set "Detail up parts" HS
| Auction ends | 13 hours |
| Bids | no |
| Current price | ¥600 $5 |
| Start price | ¥600 $5 |
| Buy-now | ¥600 $5 |
| Consumption tax | 0% included |
| Seller | dknwy153 +1104 |
| Condition | New |
| Start time | 2024-04-19T20:53:10+09:00 |
| End time | 2024-04-20T20:53:10+09:00 |
| Auto-prolongation | Turned off |
| Lot number | l1021243348 |
| Seller position | Kyoto |
■ [Prompt decision] Detailed up part "40 metal pins"+"8 spinsarts" set ■
【Description of item】
Detail up parts"40 metal pins"+"8 spinstarts" setIt will be.
・ It is a useful item for improving the details such as plastic models.
・ Especially used for gunpla, etc., even if you use it for 1/100 or 1/144 size, there is no discomfort.
It is very useful and very useful.
It is very useful and very useful.
·SpinsIs made of "dull glowing gold".Metal pinThe outside is "sharp glowing silver" and "dull glowing gold" metal inside
Because it is used, it can demonstrate a different effect from just pipes..
Because it is used, it can demonstrate a different effect from just pipes..
・ Metal pins are originally attached to the plastic foundation
We will take out the pin and ship, so you can use it immediately.. (It's an experience story again, but the installation is quite severe and hard.
If you are not used to it, it will take a lot of time.
The thin part can bend or damage the worst. )
We will take out the pin and ship, so you can use it immediately.. (It's an experience story again, but the installation is quite severe and hard.
If you are not used to it, it will take a lot of time.
The thin part can bend or damage the worst. )
■ How to use
・Metal pinIs a 1.5mm pin vise, just drill a hole in the place you want to attach!
(It feels like the whole is filled with a 2.0mm pin vise.. )
* Especially 2.0mm must be fixed with instant adhesive.. ·SpinsIs basically used in the form of sandwiching (inserted) like an image.. (Size is about 4mm outer diameter (3mm inside) 3mm ". )
It can also be used for large beam gun muzzles, burnt mouths and roots of burners..
・Metal pinIs a 1.5mm pin vise, just drill a hole in the place you want to attach!
(It feels like the whole is filled with a 2.0mm pin vise.. )
* Especially 2.0mm must be fixed with instant adhesive.. ·SpinsIs basically used in the form of sandwiching (inserted) like an image.. (Size is about 4mm outer diameter (3mm inside) 3mm ". )
It can also be used for large beam gun muzzles, burnt mouths and roots of burners..
■ Examples of use
・ Slaster and vernier injection mouth
・ Tip such as saber, beam launch, muzzle, etc.
・ As a rivet socket (mounting door)
Such
[Delivery method] When it is a fixed type mail, ""84It's a circle. (Please note that there is no guarantee in the event of theft, loss, accident, etc. )
・ Slaster and vernier injection mouth
・ Tip such as saber, beam launch, muzzle, etc.
・ As a rivet socket (mounting door)
Such
[Delivery method] When it is a fixed type mail, ""84It's a circle. (Please note that there is no guarantee in the event of theft, loss, accident, etc. )
In addition, we will accept other methods and bundles, so please contact us.
■■■ No claim No return ■■■
If you are new or have a bad evaluation, please contact us by "Question". The destination is only in Japan. (SORRY, JAPANESE ONLY.)
Only those who can contact within 48 hours after a successful bid and payment within 72 hours
We will limit it to bidding.
If you are new or have a bad evaluation, please contact us by "Question". The destination is only in Japan. (SORRY, JAPANESE ONLY.)
Only those who can contact within 48 hours after a successful bid and payment within 72 hours
We will limit it to bidding.
Thank you.
| Time | User | Price |
| No bids | ||
