Charge Controller Solar Panel PWM 60A PWM Control 12V/24V USB Port Double LCD Display Automatic Voltage Adjustment Protection System Solar Charger Controller Solar Charge Controller Charge & Discharge With Japanese Manual

[Solar system automatic management] Charge controller is an important item for solar power generation systems. A charge controller that supports 10A by PWM charging, with a built -in function to automatically manage solar panels and batteries. It mainly automatically charges and discharges the battery, controls the load, etc. In addition, the battery is compatible with both 12V and 24V, so it is safe because it switches automatically. Since there are two USB ports, it is possible to generate electricity with sunlight and use a small fan that runs on a smartphone or a USB. [Charge controller function] Charge controller has many functions. 《PWM control (charging control)》: PWM charging to fully charge the battery and minimize the generated gas. In addition, the charging voltage from the solar panel to the battery is automatically controlled to prevent overcharging batteries. "Discovering control": The load is cut off due to the low voltage of the battery and the load is automatically reconnected to prevent over -release of the battery. 《Battery Settings》: Set according to the closed battery, non -closed battery or characteristics. 《Backflow prevention》: Prevents the current from flowing back from the battery to the solar panel in low light conditions such as at night or in rainy weather. 《3 -mode timer》: Detects sunset and sunrise from the power generation state of the solar cell, and automatically controls the load connection. You can always select the settings from 3 modes, 1 to 23 hours after dusk, from dusk to dawn. [Features] ◆ Basically, it is dedicated to solar panels for independent power supply. Because the control mechanism is easy, you can use a wide variety of functions at the price that even beginners can easily start. ◆ Charge the battery (storage battery) in a method called PWM control (pulse control system). It is also suitable for small -scale systems with low power consumption. ◆ PWM is an abbreviation of Pulse Width Modulation, which is a method of controlling the pulse width of the pulse signal long or shortening to generate a certain voltage and current. You can charge the power of the solar cell with a certain efficiency without being affected by the voltage of the battery or load. ◆ PWM 4 -step rechargeable (bulk, absorption, float, equalizing charging) to complete the battery. Suppresses overheating and gas overriding and extending the life of the battery. 【Precautions for use】 (1) . If the charge controller is used in a humid place, it may fail due to condensation, so be sure to install it in a well-ventilated place. (2). When used at high temperatures (40°C or higher), depending on the type of charge controller, the protection circuit may operate and current may not flow. In addition, the same is true for controllers with a temperature sensor, so be sure to block direct sunlight when high temperatures and install it in a place where the body does not become high. (3). Due to the nature of the charge controller, if there is no connection with the battery, the output terminal of the controller will not produce the correct voltage. Please be careful when measuring the output power. (4). Incorrect connection order of the solar panel, battery, and load may cause malfunction. Be sure to connect in the order of 1. battery, 2. solar panel, and 3. load (when removing, remove it in reverse from 3.2.1.). Also, when connecting, please connect ( +) ( -) so that you do not make a mistake. [Product Details] ◆ Color: Black ◆ Material: Plastic ◆ Rated voltage: 12V / 24V ◆ Rated charging current: 60A ◆ Rated load current: 20A ◆ Operating temperature: -35°C~+60°C ◆ Size (mm): Length 90 × Width 180 × Height 45 mm ◆ Maximum Sunlight Input: 12V: 25V / 24V: 50V ◆ Fully charged voltage: b1 Sealed/14.4V, b2 Gel/14.2V, b3 Flood t/ 14.6V ◆ Float charging voltage: b1/14.4V, b2~/14.2V, b3~/14.6V, adjustable range: 13V-15V ◆ LVD: 10.7V, adjustable range: 9.5V-11.5V ◆ LVR: 12.6V, Adjustable range: 11.5V-13V ◆ USB output: 5V / 2A (maximum) * 1A output when only 1 port is used ◆ Weight (kg): 0.29 Solar Charge Controller, Japanese Manual

Brand newunused

■ Delivery fee (nationwide uniform) ■ Letter pack plus: 520 yen

* The shipping cost of two or more will vary depending on the product, so please check with us before purchasing.

* Please note that the letter pack plus may be changed to Sagawa Express due to the warehouse that is requested to be sent (the same amount is the same amount).

I'm sorry, but we may not be able to respond immediately after a successful bid. We will try to respond as soon as possible, so
Please understand in advance. In addition, shipping is not performed on weekends and holidays. Please also note.