Yamaha YAMAHA HS7 Powered Studio Monitor Speaker x 2. * Sold in 1 pair (set of 2). 6.5 -inch high cost performance model that boasts excellent regeneration abilities and supports professional use. 【Features】
・ 6.5 inch woofer for LF and 2 -way bass reflex type with 1 -inch dome tweeter for HF
・ Playback frequency band 43Hz -30kHz (-10dB) / 55Hz -24kHz (-3db) and wide bandwidth
・ LF60W+HF35W bai amplifier specification. Equipped with high -quality power amplifier with total 95W output
■ Newly developed speaker unit and carefully selected acoustic parts. The new HS series adopts a newly developed transducer with an advanced magnetic circuit design that controls and uniforms the flow of the magnetic line, and is dramatic by re -selecting and optimizing acoustic parts. I tried to improve the regeneration ability. ・ Tweeter
HS5, HS7 and HS8 are equipped with newly developed high -performance 1 -inch dome tweeter. The tweeter boasting high -resolution and excellent starting up has further expanded high -frequency renewable frequencies.. In addition, the high range is accurately and smoothly played by matching with the thick wave guide designed to minimize resonance.. ·woofer
HS5, HS7, HS8 dedicated woofers are also newly developed. A large magnet, a high -quality, high -tolerance woofer, which is smooth and excellent in response, realizes a low -distortion, low -range braking low frequency.. At the same time, the wooferling and basket are re -selected and optimal design to achieve a more outline low range.. ■ High -performance power amplifier
The power amplifier is adopted a bi -amplifier method that amplifies each band of high and low range with a dedicated power amplifier.. High -performance amplifiers optimized for each model always provide a uniform sound with high quality and low sound quality.. ■ Enclosure design to reduce resonance. The enclosure of the HS series is designed to thoroughly eliminate unnecessary resonance and increase the accuracy of the sound to the limit.. The enclosure uses a thick MDF with high rigidity and uniform acoustic characteristics, and the joining is adopted a technique that has long been used in timber architecture and a three -sided structure.. By combining the unevenness provided on the bonding surface of the wood without gaps, the intensity is incomparable to simple side joining.. Musical Instrument Manufacturing A design that focuses on the know -how and sound quality accumulated in the history of more than 120 years.. ■ Reduction of noise due to the latest fluid sound control technology. The air vortex around the bass reflex port induces air vibration inside and outside the port, causing noise in the port.. In the new HS series, the latest fluid sound technology that visualizes, analyzes, and controls air flow and sound is adopted as a port -shaped design.. The new port, which minimizes air vortex, reduces the noise of the audible bandwidth up to 6DB SPL ( * Yamaha, compared to Yamaha), and responds to high demands in the music production environment.. ■ Controls and enriched terminals that enable detailed settings according to the environment. The rear panel is equipped with a Room Control that corrects the low range that is often emphasized when the speaker is placed near the wall and enables accurate monitoring.. Can be adjusted in two stages, -2db and -4db. Equipped with HIGH TRIM (+2db, 0, -2db), you can set a precise balance setting according to the room and application.. The input terminal is equipped with XLR and TRS pawn terminals, and flexibly corresponds to the use case, such as mixer, keyboard, and output from audio interface.. [Main standard]
・ Format: Bai amplifier 2way bass reflex type powered studio monitor
・ Playback frequency bandwidth
: (-10db): 43Hz -30kHz
: (-3db): 55Hz -24kHz
・ Crossover frequency: 2kHz
·component
: LF: 6.5 "Corn
: HF: 1 "Dome
・ Amplifier rated output*
: TOTAL: 95W
: LF: 60W (4Ω)
: HF: 35W (8Ω)
・ Input connector (XLR and Phone are parallel connections): "XLR3-31 Type (Balanced) x1 / Phone (Balanced) x1"
・ Output connector:-
・ Input impedance: 10kΩ
・ Output impedance:-
・ Input sensitivity
: Level: Maximum: -10dbu
: Level: Center: =+4dbu
・ Maximum input level: =+24dbu.
・ Maximum output level:-
・ Level Control/EQ: HIGH TRIM switch (+/- 2DB AT HF): Room Control Switch (0/-2/-4 DB Under 500Hz)
・ Indicator: Power ON (WHITE LED)
・ Power consumption: 55W
・ Dimensions: 210W × 332H × 284D mm
・ Mass: 8.2 kg
・ Accessories: Instruction manual, power cord
・ Riging point:-
・ Optional option:-
*Dynamic power
*Do not install the speakers sideways. *Please do not place this unit in an unstable place to prevent falling and falling.. If you put it on a slippery desk or table, please take a non -slip treatment if necessary..

---

We keep stock products in the Kanto warehouse in addition to the headquarters warehouse (Kitakyushu, Fukuoka). Even if the dispatcher is in Fukuoka Prefecture, depending on the ordered product, if it will be shipped from the Kanto warehouse or order a multiple items, it will be shipped from multiple warehouses and delivered in multiple mouths. There may be. Please note.

---

Time	User	Price
No bids