Detailed information

KALELAISU Automatic film winding up machine Use Ventilation device Output Output Roll film Weight 600kg Control Circle number 40 toral electric film winding machine

KALELAISU Automatic film winding up machine Use Ventilation device Output Output Roll film Weight 600kg Control Circle number 40 toral electric film winding machine

• 1. Equipment parameter: Operation voltage DC24V, motor speed 3.8 rpm, output 80W, large roll film length 100 meters, roll film weight 600kg, number of control circles: 40, torque 80N.M
• 2. It can be used in windows such as glass rooms and sun rooms, film ventilation at the top of the film greenhouse and the upper part of the film greenhouse, leisure greenhouse, vegetable greenhouse, flower room, fruit greenhouse, poultry greenhouse.
• 3. High quality: Large output motor is adopted, internal gears (high power gear) are adopted, and after carbon adding processing, the hardness is high and cannot be cut.. Long life. The aircraft adopts a good aluminum alloy material, the outer shape is beautiful, and the surface has a plastic and treated it, and the preservative effect is good.
• 4. Electric type, labor saving, easy operation with one key, moving up and down smoothly. Rain, dustproof, insects, and quality are determined and reliable. Accuracy Limit Switch: The output axis is turned one by one for each square, and there are two colors of switches, making it easy to check positive reversal.

Winding ventilation device Electric film winding machine Film Wrested greenhouse Library greenhouse, vegetable greenhouse, flower room, greenhouse, poultry greenhouse glass room shading room for both sides of agricultural greenhouse

• Select material:
• 1. If within 50 meters from the winding machine, use 1.5 square copper wire
• 2. It is recommended that you connect 20 units on the same main line and make the main line a meter or 10 square meters of copper core..
• When connecting 3 or 20 electric winding machines at the same time, it is recommended to use a 1600 W or 2000 W transformer..
• 4. After attaching the film winding machine, be sure to attach the waterproof cover so that water does not enter the machine..
• 5. After attaching the film winding machine, check if the roll film tube is straight and the whole shaft is running without hindrance.. Make sure the drive shaft rotates smoothly and then turn on the motor.
• Adjustment method:
• 1. Fix the machine in the middle of the developed film, turn on the power to start the motor, change the direction of the motor several times to test whether the motor is working properly..
• 2. Machine's drive shaft can rotate about 40 revolutions (about 10 minutes). When using a 25mm roll film tube, the width of the roll film is about 4m..
• 3. The limit switch part of the machine is as shown in the figure, and the red and green source is 0.. If a 25 mm winding film tube is used as a drive shaft, the height of the membrane wound up for each large winding film tube is about 0.08 m, and the height of the film wound up for each of the 10 scale rolled film tubes. Sa is about 1 meter.
• 4. Open the waterproof cover, press the adjustment button to adjust it to the thin film width..
• 5. After adjusting the limit switch, repeat it several times to test whether it works normally, and at the same time adjust to the optimal operation position..
• 6. After adjustment, please do not exchange without permission.

KALELAISU Vinyl House Side Ventilation House Side Winding Machine House Ventilation Vinyl Motor Winding Machinery Bubin House Motor

• Notes:
• (1) Drive the steel pipe at the edge of the greenhouse where the electric film winding machine is installed, extend it by 150mm and cut it.. Don't bend or twist.
• (2) Connect the drive shaft and drive steel pipe joint with M8 hexagon screw.
• (3) The overlap length of the nest type tube (outside) and the nested tube (inside) should be 100mm or more.
• (4) The nested tube (inside) and the fixing tube can rotate around the fixed steel pipe after joining..
• (5) The steel pipe of the rise on the side and the steel pipe for driving must be at right angles..
• After attaching the electric film winder, the limit adjustment is required, so check if the voltage is correctly connected before the limit adjustment or the power supply voltage is correct..