☆ Electric hitch crane V dedicated to jet & trailal boat
Auction ends | 3 days |
Bids | no |
Current price | ¥68,000 $471 |
Start price | ¥68,000 $471 |
Buy-now | ¥68,000 $471 |
Consumption tax | 0% included |
Seller | lange324 +1151 |
Condition | New |
Start time | 2024-04-25T17:13:34+09:00 |
End time | 2024-05-01T17:13:34+09:00 |
Auto-prolongation | Turned on |
Lot number | m373267916 |
Seller position | Hyōgo Prefecture |
It is a self -made electric hitch crane dedicated to jet & ship
I have more than 100 productions and I am confident in the quality of the product..
・ The crane body (pulgen included) Total length 2.5m
・ Attachment with casters connected to the hitch
・ Holding chain from the top of the main unit (for connection to car) about 5m
・ Winch is a wired remote control type 250LBS wire specification.
The size of the caster changes depending on the car.
Please inform us the distance from the bottom of the receiver to the ground before a successful bid..
14-18.9cm is a special specification, so an additional amount (10,000 yen) is required..
There is no spacer up to 19 to 23.9 cm (no additional charges)
1 spacer (3,000 yen) is required every 24 cm or more.
1 spacer (3,000 yen) is required every 24 cm or more.
* Even if there is a change of vehicle after purchase, it can be used by adding or removing spacers..
There is no problem testing at 500 kg by checking the strength of the crane itself (boom)..
Some people are actually used in a 500kg jet.
However, if you use it for 300 kg or more, you need to increase the following strength (separately)..
・ Winch size up. ・ The thickness of the boom 2.3t → 3.2t
・ In addition to casters
・ Improved the size of the holding chain
We will give you advice by emailing the usage environment (up and down object or kenshi vehicle)..
lange324@yahoo.co.jp
Depending on the usage environment, the size of the winch is also possible..
It can also be changed from a wire to a syntheting rope (chemical fiber)..
We will consider a winch size, assuming that there will be a new ship's replacement..
If you have a request, we will prepare at a low price..
We will give you advice by emailing the usage environment (up and down object or kenshi vehicle)..
lange324@yahoo.co.jp
Please note the shape of the receiver
It has a 2 -inch (5.1cm) specification with a general receiver shape..
* 4cm horns such as Solex can also be made, but separate costs (3,000 yen) are required.. * Tight Japan's round type cannot be prepared. Please prepare a conversion adapter for the buyer.
Solex conversion 2 inches → 4.0 cm 3,000 yen
Boom extension 2.5m → 3.0m 5,000 yen
Boom thickness 2.3 → 3.2t 10,000 yen
Caster spacer (including bolts) 1 3,000 yen
2 -wheeled casters → 3 wheels 5,000 yen
Caster part extension 3,000 yen
Boom holder chain size up 3,000 yen
Winch size up (syntheting rope specification) 4500LB 10,000 yen
Standard winches are changed only for syntheting rope 5,000 yen
Boom extension 2.5m → 3.0m 5,000 yen
Boom thickness 2.3 → 3.2t 10,000 yen
Caster spacer (including bolts) 1 3,000 yen
2 -wheeled casters → 3 wheels 5,000 yen
Caster part extension 3,000 yen
Boom holder chain size up 3,000 yen
Winch size up (syntheting rope specification) 4500LB 10,000 yen
Standard winches are changed only for syntheting rope 5,000 yen
Basically, I would like to give a description explanation, so please pick it up..
If you are far away, we will explain as much as possible, but please understand that you can not explain in the actual thing..
Basically, the shipping cost is 5,000 yen (including packing fee)..
Okinawa and remote islands are required separately.
Because it is made to order, it will be paid after the completion of the product.
In the case of picking up, it is payment when picking up.
I am confident in the product, but please use it at your own risk..
Please understand that you cannot guarantee as long as you do not know the handling status of the buyer..
In the unlikely event that an accident occurs, no compensation can be done..
Please use it at the responsibility of the successful bidder (buyer). Only those who understand, please order a bid.
・ If you want to purchase cheaply, we accept e -mail orders..
If you order email or parts, please contact the following address..
lange324@yahoo.co.jp
・ We recommend that you email you before bidding.
We will give you advice based on the results of the production so far..
・ If you are nearby, please consider it after touring..
・ The crane body and the attachment part with casters can be assembled without a tool.
It is possible to fix it,
Considering handling, storage, and transportation, we are assembled..
It is a weight balance that even women can handle by themselves.
It will be a size that can be stored in the company even with light four.
I transport it with light four EK, pleo, hustler, etc..
・ Wide and tall ships, such as NEO390, need to change the boom from 2.5m to 3.0m (5,000 yen)..
Thank you for reading to the end.
It will be a very useful tool, but it will be expensive, so please consider it carefully before ordering..
Time | User | Price |
No bids | ||