Shipping cost540 yen ⇒(South Tohoku/Kanto/Shinetsu/Hokuriku/Chubu/Kansai)
|
Other reptile panel heaters and breeding supplies
I hope you can see our website. |
New consumption tax 0 yen!
@Repleptile Heat M@
Panel heater for reptile |
★ Product Description |
● Maker |
GEX (GEX) exotella (EXOTERRA) |
● Product name |
Repleptile Heat M 20w |
● Size |
Excluding the cord part about 20w about 30.5 x 23.0cm (heater part 28.0 x 19.5cm) |
● JAN code |
4972547029478 |
Reptile heatThe following products are on sale. [Repleptile heat XS】
[Repleptile Heat S]
[Reptile Heat M]← ☆ Products on this page ☆[Repleptile heat L24】
[Repleptile Heat Long 20]
--Maker notation quotes-
Panel heater for reptile
General Association Nippon Electric Floor Heating Industry Association Acquisition of Product Standards Society of Product StandardsReptile suppliesmade in Japan
Heater part size about 28.0 x depth 19.5cm
Estimated cage width 45-60cm cageGlassteralium4530/4545/4560Lepteria 500Glastellarium 6030/6045/6060
Reproduce the warmth of the earth that the sun warms up
The industry's first 6 -layer structural structure safe / secureThe adoption of a special fiber and a uniform aluminum that includes the patented PTC paint and the uniform heat aluminum is highly durable, and the whole is evenly warmly warmed. Comfortable temperature just by putting it into a simple outlet
Set temperature of about 45 ° C (temperature setting accuracy ± 5 ° C)
● The temperature on the surface of the heater. The temperature in the cage varies depending on the conditions. Guarantee / instruction manual
Ask the dealer
There is a warranty card in the case. Sorry to trouble you, but please be sure to fill in the ★ mark in the warranty card. This product is exclusively for Japan. For Japan USE ONLY
Electricity fee about 12 yen per day
(In the case of continuous use, 1kWh25 yen)
Rep heat M
Reliable safety
● This product is a self -temperature control panel heater that uses a special fiber PTC used as a floor heating of the house. ● Realized high durability that is strong against scratches. ● The entire heater warms up evenly by adopting a uniform heat aluminum, so warm the cage efficiently. ● Panel heaters, which are unlikely to cause sudden temperature changes, are easy heating for reptile of the temperature animal.
M is a cage auxiliary heater with a width of 45-60cm and L is 60-90cm wide, and should be used under the cage. Example of usePlease spread this product under the cage and lay it. In addition, please set up the bottom area of the cage 1/3 to 1/2 as a guide. Note:
● Paste it on the cage and do not use it. ● Please install outside the cage. Do not install in the cage. When you want to adjust the temperature of the breeding environment / when used for cages without legs at the bottomUse wood to adjust the gap between the cage and this product. Please do not adhere to the cage and this product.If the flooring is thickened thickly, the temperature of the heater may not be transmitted to the surface of the floor material. While checking the temperature on the floor material surfaceFlooringPlease adjust the thickness of. |
Self -temperature control type (PTC)Panel heaterWhat is
PTC is a substance that has the characteristic of increasing the resistance when the temperature rises and reducing the current. Reeptile heat adopted "special conductive paint" with this PTC characteristics. By simply put into an outlet, the heater surface temperature is kept constant (45 people 5 ° C) to create a comfortable temperature for reptiles.● Easy! Just put it on the outlet!
● Reversible type that does not care about the orientation of the code
Since it can be used for either front and back, you can connect to the outlet without difficulty.● Use tracking prevention plugs
● Adopted power blocking function (current fuse)
To use it safely
The warnings and precautions that appear in the instruction manual should be carefully read and understand before using the product. Please keep the instruction manual at any time. ● This product is only for indoor reptile breeding. Do not use for other purposes. ● When operating and setting to a child, be sure to go under the monitoring of adults. ● This product cannot be used in the cage. Be sure to install outside the cage. ● This product cannot be used underwater, outdoors, or humid. ● This product is a heater that helps a part of the cage auxiliary warmth. If you want to keep the entire cage warm, warm the entire room. ● The setting temperature of this product is the temperature on the heater surface. Please check the installation position with a thermometer according to the breeding environment and use it. ● This product has no ability to lower the temperature. ●cageDepending on the material of the installation location, the heated part may be discolored or deformed depending on the heater. Please be careful. Model name |
Repleptile Heat M |
Item name |
Reptitimate heater |
Use |
indoorreptilesBreeding |
Rated voltage / frequency |
AC100V 50/60Hz |
Rated power consumption |
20W |
Preset temperature※ |
Approximately 45 ° C (temperature setting accuracy ± 5 ° C) |
Used peripheral temperature |
5-40 ° C |
Power blocking function |
Current fuse |
Product size (excluding code portion) |
Approximately 30.5 x depth 23.0cm |
Power cord length |
About 1.5m |
Country of origin |
Japan (Made in Japan) |
Seller |
Jex Co., Ltd.
1-14-5, Higashi-Osaka City, Osaka Prefecture 578-0903 |
* Approximately 20 ° C peripheral temperature, no windheaterBody surface temperature
■ We are making a thorough product manufacturing and management, but in the unlikely event that there is a poor quality due to our manufacturing management, we will replace it with the same new product. Please forgive other responsibilities. ■ Product specifications, designs, prices, etc. may be changed without notice.. GEX Jex Co., Ltd. 072-966-0054 "Jex Service Center"
For more information, please see the product description page below ↓Repleptile Heat MProduct description pageReptile heatProduct description page
|
★ Shipping statementShipping will be borne by the customer. |
★ Shipping ★
Delivery area |
Yamato Transport |
Takkyubin |
Within 100 sizes
(Up to 9) |
120 size or more
(No matter how many of you, this shipping fee is OK) |
Hokkaido |
¥ 1,130 |
¥ 1,370 |
Northeast North |
¥ 660 |
¥ 1,040 |
South Tohoku / Kanto
Shinetsu / Hokuriku / Chubu |
¥ 540 |
¥ 930 |
Kansai |
¥ 540 |
¥ 1,040 |
China · Shikoku |
¥ 847 |
¥ 1,150 |
Kyushu |
¥ 1,010 |
¥ 1,370 |
Okinawa |
¥ 2,481 |
¥ 3,200 |
Our shop will be shipped from Hitachi City, Ibaraki Prefecture. |
Isn't it troublesome to compare the price and find a separate product?
There is a wide selection of breeding items, so we will have everything in our shop!
★ If you buy in bulk rather than purchasing separately, shipping feeIs one ★
For other reptile breeding supplies, please see our site above
Of course we also handle living organisms! |
|