Panasonic EZ7881PC2V-R 28.8V Hammadrill Collection With dust system 3.4Ah battery pack x2+with charger
Auction ends | 1 day |
Bids | no |
Current price | ¥121,096 $831 |
Start price | ¥121,096 $831 |
Buy-now | ¥121,096 $831 |
Consumption tax | 10% not included |
Seller | daichana +30638 |
Condition | New |
Start time | 2024-04-25T09:50:37+09:00 |
End time | 2024-05-02T09:50:37+09:00 |
Auto-prolongation | Turned off |
Lot number | p1107920118 |
Seller position | Osaka prefecture |
It is EZ7881PC2V-R (red) of 28.8V hammer drill made by Panasonic.Characteristic●Improve power and durability than conventional machines!·Equipped with large, high -power brushless motorBy installing a brushless motor
Compared to Panasonic's "EZ7880" (hammer mode "strong")
Power is about 1.5 times and speed is about 1.2 times. In the case of the hammer mode "high -speed", the maximum concrete hole is possible.. It is resistant to high load and contributes to shortening work time.. In addition, an excellent dust -proof and water -resistant design is adopted.. The life of the switch motor is about twice as much as the conventional Mecas switch Brush Motor.. ·Strong in continuous workOverwhelming power contributes to consecutive work -resistant design and shortening work time. ·Up power and durabilityConcrete holes maximum φ28mm (at high speed "at high speed"). Factory connection φ28mm drilling hole. Deck plate φ12.5mm penetration is also possible. ·Drill mode is also powered upVentilation fan for range hood φ160mm can be penetrated. ●Small and lightweight and powerful gathering!·Equipped with a high -performance "HEPA filter" of clean exhaustHEPA filter used for clean rooms and air purifiers
Catch a small dust. 0.3 Supplementary rate of 99.97%or more for micron particles. You can work comfortably by clean exhaust. ·Adopt a unique wind road designWith a unique wind road design that suppresses the dust of dust,
Sucking powerfully to the dust in the hole, whether upward or downward. 3 minutes anchor 30 holes with plenty of dust. * In the case of a drilling depth 40mm. ・ It is linked to the switch of the hammer body with a directly connected type of the main unit.. ・ The plumbing depth adjustment can be changed freely up to 75mm.. *
* When the collective system is installed, the concrete drill diameter is up to φ18mm.. ・ The suction port adjustment can be changed freely up to 75mm. *
* When the collective system is installed, the concrete drill diameter is up to φ18mm.. ●Reduced vibration by about 30 % *, less fatigue without power.·Adopt a unique vibration control mechanism.Powering the grip and the vibration that comes back,
Newly developed a unique "vibration mechanism" that mutually cancels with the internal organs.. Moreover, because the grip can be pushed out straight,
Achieving work that is less likely to be tired without power. * Panasonic EZ7880 ratio (in the main handle)
●Enhanced advanced functions and support functions unique to Panasonic·Newly developed hamma drill -only battery (28.8V / 3.4Ah).The amount of work is firm, 35 holes of φ18x depth 70mm in one charge.. ·Power can be switched to three stages according to the work.·Battery residual capacity is also checked with one push OK.·Light is OK.Sold separately hanging attachment: EZ9HX402 is required. ·TOUGH TOOL IPExcellent dustproof / water -resistant design that is resistant to dust, dust, rain and splashes. International standard IP56. *
please note! )
This product is designed to reduce the effect on dust and water,
We do not guarantee that it will not break down due to dust or water. ·LED Light, reverse reverse switching attachment●Horizontal hole is convenient for horizontal and vertical holes.Appeared in Hammer Drill (EZ7881 / EZ7880) Horizontal EZ9X401. Can be attached to depth adjuster. please note! )
Please note that specifications and appearance are subject to change..specification●Switching number of rotations:Three stages
●Quick rock chuck: ○
●LED light: ○
●Dustproof / water resistance: IP56
●Chuck: Quick rock chuck method
(Compatible with SDS plus type shank)
●Work range·Concrete: Φ3.2-28
・Kinjin Hall Sa: ~ Φ50
・Siding: ~ Φ160
●Speed of rotation·high speed: 0 to 840 (rotation/minute)
・Medium speed: 0 to 680 (rotation/minute)
・Low speed: 0-560 (rotation/minute)
●Number of hits·high speed: 0 to 4,400 (times/minutes)
・Medium speed: 0 to 3,600 (times/minutes)
・Low speed: 0 to 2,950 (times/minutes)
●Impact power·high speed: Approximately 3.3j
・Medium speed: Approximately 2.3j
・Low speed: Approximately 1.4j
●Hammer drill switching: Yes (Drillmodes are required at the time of the following items. )
EZ9HX400, EZ9HX401
●Body dimensions: Total length 507X total height 241X Width 92mm (when the collective system / battery pack is installed)
: Total length 368x total height 237X Width 92mm (No dust system, when battery pack is attached)
●Quality: 4.8kg (when the collective system / battery pack is installed)
: 3.85kg (no dust system, when battery pack is installed)
●Vibration 3 -axis synthesis value*: 9.9m/s2 (in the main handle)
: 11.4m/S2 (in the auxiliary handle)
* Panasonic measured value based on the measurement standard EN60745-2. ●Battery pack used: EZ9L84
・Voltage: DC28.8V
・Capacity: 3.4Ah (PC type, lithium ion)
●Quick charger: EZ0L81
Charging status display, charger / battery pack abnormality display, cooling charging function, battery identification optimal charging function
Voltage: AC100V 50/60Hz Power consumption: Approximately 198W mass: about 900g
・charging time: Approximately 45 minutes for practical charge and about 65 minutes by full charge *
* Battery pack: EZ9L84 when charging. * Charging time may be higher than the display time depending on the battery pack condition.. ●ability(Estimated, concrete strength 2.4kn/cm2 {240kgf/} during full charge
・Hammer+high speedConcrete (φ12.5x depth 40mm): Approximately 140 holes
Concrete+deck protection 1.6mm (φ12.5x depth 40mm): Approximately 45 holes
Concrete (φ18x depth 70mm): Approximately 35 holes
・Drill+high speedWoodworking Yonematsu (φ30x depth 120mm): Approximately 40 holes
Core drill siding (φ160x16mm): Approximately 55 holes
(The number is a reference value. It depends on the condition of the battery and the working conditions. )
Body, dust system: EX9X400, 28.8v-3.4Ah battery pack: EZ9L84X2,
Quick charger: EZ0L81, shoulder belt, plastic case set. Thank you!please note!●This item is not handled by cash on delivery flight.Please note this point.
Compared to Panasonic's "EZ7880" (hammer mode "strong")
Power is about 1.5 times and speed is about 1.2 times. In the case of the hammer mode "high -speed", the maximum concrete hole is possible.. It is resistant to high load and contributes to shortening work time.. In addition, an excellent dust -proof and water -resistant design is adopted.. The life of the switch motor is about twice as much as the conventional Mecas switch Brush Motor.. ·Strong in continuous workOverwhelming power contributes to consecutive work -resistant design and shortening work time. ·Up power and durabilityConcrete holes maximum φ28mm (at high speed "at high speed"). Factory connection φ28mm drilling hole. Deck plate φ12.5mm penetration is also possible. ·Drill mode is also powered upVentilation fan for range hood φ160mm can be penetrated. ●Small and lightweight and powerful gathering!·Equipped with a high -performance "HEPA filter" of clean exhaustHEPA filter used for clean rooms and air purifiers
Catch a small dust. 0.3 Supplementary rate of 99.97%or more for micron particles. You can work comfortably by clean exhaust. ·Adopt a unique wind road designWith a unique wind road design that suppresses the dust of dust,
Sucking powerfully to the dust in the hole, whether upward or downward. 3 minutes anchor 30 holes with plenty of dust. * In the case of a drilling depth 40mm. ・ It is linked to the switch of the hammer body with a directly connected type of the main unit.. ・ The plumbing depth adjustment can be changed freely up to 75mm.. *
* When the collective system is installed, the concrete drill diameter is up to φ18mm.. ・ The suction port adjustment can be changed freely up to 75mm. *
* When the collective system is installed, the concrete drill diameter is up to φ18mm.. ●Reduced vibration by about 30 % *, less fatigue without power.·Adopt a unique vibration control mechanism.Powering the grip and the vibration that comes back,
Newly developed a unique "vibration mechanism" that mutually cancels with the internal organs.. Moreover, because the grip can be pushed out straight,
Achieving work that is less likely to be tired without power. * Panasonic EZ7880 ratio (in the main handle)
●Enhanced advanced functions and support functions unique to Panasonic·Newly developed hamma drill -only battery (28.8V / 3.4Ah).The amount of work is firm, 35 holes of φ18x depth 70mm in one charge.. ·Power can be switched to three stages according to the work.·Battery residual capacity is also checked with one push OK.·Light is OK.Sold separately hanging attachment: EZ9HX402 is required. ·TOUGH TOOL IPExcellent dustproof / water -resistant design that is resistant to dust, dust, rain and splashes. International standard IP56. *
please note! )
This product is designed to reduce the effect on dust and water,
We do not guarantee that it will not break down due to dust or water. ·LED Light, reverse reverse switching attachment●Horizontal hole is convenient for horizontal and vertical holes.Appeared in Hammer Drill (EZ7881 / EZ7880) Horizontal EZ9X401. Can be attached to depth adjuster. please note! )
Please note that specifications and appearance are subject to change..specification●Switching number of rotations:Three stages
●Quick rock chuck: ○
●LED light: ○
●Dustproof / water resistance: IP56
●Chuck: Quick rock chuck method
(Compatible with SDS plus type shank)
●Work range·Concrete: Φ3.2-28
・Kinjin Hall Sa: ~ Φ50
・Siding: ~ Φ160
●Speed of rotation·high speed: 0 to 840 (rotation/minute)
・Medium speed: 0 to 680 (rotation/minute)
・Low speed: 0-560 (rotation/minute)
●Number of hits·high speed: 0 to 4,400 (times/minutes)
・Medium speed: 0 to 3,600 (times/minutes)
・Low speed: 0 to 2,950 (times/minutes)
●Impact power·high speed: Approximately 3.3j
・Medium speed: Approximately 2.3j
・Low speed: Approximately 1.4j
●Hammer drill switching: Yes (Drillmodes are required at the time of the following items. )
EZ9HX400, EZ9HX401
●Body dimensions: Total length 507X total height 241X Width 92mm (when the collective system / battery pack is installed)
: Total length 368x total height 237X Width 92mm (No dust system, when battery pack is attached)
●Quality: 4.8kg (when the collective system / battery pack is installed)
: 3.85kg (no dust system, when battery pack is installed)
●Vibration 3 -axis synthesis value*: 9.9m/s2 (in the main handle)
: 11.4m/S2 (in the auxiliary handle)
* Panasonic measured value based on the measurement standard EN60745-2. ●Battery pack used: EZ9L84
・Voltage: DC28.8V
・Capacity: 3.4Ah (PC type, lithium ion)
●Quick charger: EZ0L81
Charging status display, charger / battery pack abnormality display, cooling charging function, battery identification optimal charging function
Voltage: AC100V 50/60Hz Power consumption: Approximately 198W mass: about 900g
・charging time: Approximately 45 minutes for practical charge and about 65 minutes by full charge *
* Battery pack: EZ9L84 when charging. * Charging time may be higher than the display time depending on the battery pack condition.. ●ability(Estimated, concrete strength 2.4kn/cm2 {240kgf/} during full charge
・Hammer+high speedConcrete (φ12.5x depth 40mm): Approximately 140 holes
Concrete+deck protection 1.6mm (φ12.5x depth 40mm): Approximately 45 holes
Concrete (φ18x depth 70mm): Approximately 35 holes
・Drill+high speedWoodworking Yonematsu (φ30x depth 120mm): Approximately 40 holes
Core drill siding (φ160x16mm): Approximately 55 holes
(The number is a reference value. It depends on the condition of the battery and the working conditions. )
Body, dust system: EX9X400, 28.8v-3.4Ah battery pack: EZ9L84X2,
Quick charger: EZ0L81, shoulder belt, plastic case set. Thank you!please note!●This item is not handled by cash on delivery flight.Please note this point.
Time | User | Price |
No bids | ||